PSE 13 Win 8.1 will not be installed, "detects the computer restarts" even after the computer restarts

Similar Questions

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Why uninstall Norton 360 will not be installed at the factory? I'm running a new antivirus

  Why uninstall Norton 360 will not be installed at the factory?  I'm running a new antivirus

  It starts to uninstall (the small circle thang) then stops

  I know that with AVG, you must visit the AVG site to install an uninstall program to remove the program... seems absurd, I know, but that's what's happening with AVG... I don't know if something similar should be done with Norton... but you should be able to disable it... right click that the Norton icon in the tray and you should see options, which will be disable IT are other ways, I don't know, but I haven't used Norton.

• Microsoft Picture It! 2001 will not be installed on my computer. The installation program detects that IE 5.5 installation is incomplete.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  ======================================
  You may need to go back to IE6 so that PI2001 to install. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cloud creation will not completely install on the new computer.

  Creative cloud will not completely install on my new computer (Mac).  Can someone help me?  I've logged into my account and want to bring my creative cloud subscription programs.

  You must first install the Creative Cloud Desktop App and use it to install the applications. (see the link below to install)

  The links below can help. If you get a specific error, please let us know the details as well as the operating system you are using and what you are trying to install.

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps

  FAQ: What should I do if I have trouble to download or install the creative cloud and Creative Cloud Apps?

• Java applet will not be installed in the browser

  My VI will not install a JAva Applet. I keep saying "Install Java Applet" and it never prompts for an installation or whatever it is. Any ideas? Is there something I should do that I'm not aware? I've attached a screenshot of the window where is says install.

  I understood the question. Java is messed up on all sorts of ways on my computer. But to answer your question, the site requires java to function and it cannot load java so that it never works.

• C4580 Set - up - will not be installed on the PC XP Home Edition

  Hello

  Happy Thanksgiving all!

  I almost gave up trying to get my C4580 all-in-one installed on my PC XP Home Edition.

  Has anyone else encountered this problem.

  XP won't allow hp imaging to register.

  Message edited by Trentmd001 on 11/30/2008 07:21

  Trentmd001 wrote:

  The MSI.dot4wpt error. hpmiapi.dll will not fit.

  I think that I had your same problem, or at least very similar. The error that I had 'MSI.dot4wrp", not"MSI.dot4wpt ". I sent a detailed cause and solution to HP, but apparently, they don't have it entered into their system.

  Your errors look something like that... http://sites.Google.com/site/hpc4580installproblem/

  The solution was to run "regsvr32 c:\windows\system32\atl.dll" in the window start: run. After that, Setup completed without error.

  After I got the software finally installed and everything works, my C4580 would freeze sometimes every day or so and forcing me to unplug the power cord. It is a separate issue if... http://forums.MacRumors.com/showthread.php?t=571026

  Hope this helps,

  Mark

  Message edited by msmn4393 on 02/12/2008 10:01

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• Win security update will not download install - error 0x8007F0F4 - what do do next?

  I can't know what that error code means... any help would be so appreciated.  Thank you.

  http://support.Microsoft.com/kb/958051

  read the article above.

• Games will not be installed by the internet download

  stops the installation when downloading on Internet

  Download the installer to your desktop and right-click on it, and then click Run as administrator.  It sometimes works when standard installation procedures only.

  If this does not work, please transfer your question in the Forum http://social.answers.microsoft.com/Forums/en-US/vistagaming/threads games where people who specialize in the installation of games among other will be more than happy to help you with your problem.  Please post the name and the version of the game you want to install (and a link to the download site) as well as which version of Vista you are using when you post here in order to get the best possible service.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Driver chipset XP will not be installed in the Satellite Pro L20

  Hello

  I recently rebuilt my Satellite Pro L20 to finally give my father in law.
  I installed windows XP home on it and have currently installed SP2.
  When I try to install the software of the chipset of the official region on the Toshiba site he says that my operating system does not meet the criterion even though windows XP is listed in the readme file.

  Please help as this is supposed to be a Christmas gift!

  Thanks in advance

  Rick

  Post edited by: rick_monkey - spelling!

  Hello!

  Have you really downloaded the correct driver? For this model are XP and Vista drivers available so I think that you had to download the wrong driver.

  Try again, maybe the download file is intact. If it doesn t work once again, you can download the driver also from Intel.

  But normally you have a Toshiba Recovery with all the drivers and tools disk. Install from this disc and you have a clean and ready installation.

  Good bye

• HPC7250 printer all in one will not be installed to G500 computer laptop Lenovo with 8.1

  I have a HP Photosmart C7250 that prints from an old mac, but the new Lenovo G500 with 8.1 does not find the printer or says that it is offline.  Software from the Web site solution installs for 20 minutes, then when I try to start, it starts to install the exact same software again and again.  It is in a loop of some sort.  The computer says there is a problem with the printer, but can not solve the problem. Can you help me?  Thank you.  RobertM9

  Uninstall the old drivers allowed the complete software suite to install, and I printed out just my first doc. I hope this helps someone else.

• The Adobe Creative Cloud installation program will not accomplish instalation on my computer Windows 10 please help as to what other options can I use to download and install the creative cloud. Please and thank you

  Adobe Creative Cloud

  Could you please try to download & install by direct download links:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  2015 all updates of Adobe CC: Direct for Windows download links | ProDesignTools

  Please follow them: very important

  Concerning

  Stéphane

• I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just does

  I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just doesn't let me activate it. Can you help me?

  If you're referring at the origin of Creative Suite (CS1) then this activation server was closed by Adobe a few years ago.

  The only way to re - install now is to download a new version without activation for CS2 (also applies to CS1 owners).

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Install, then enter the new, without activation serial number provided at this link (column next to the download link). Your existing serial number no longer works.

• error "itunes has an invalid signature, it will not be installed."

  Hi everyone, I get 'itunes has an invalid signature, it will not be installed' error when Apple Software Updater is downloaded and installed iTunes 12.4.1. Although my iTunes itself indicates the version of curren (12.1.3) is the latest version, software update tries to update and gives this error. What to do to correct this error and install the latest update?

  Thank you

  Are you sure that you run Windows 10 as stated in your slogan?  What is Win XP?

  iTunes version 12.1.3.6 is the most recent version running on Windows XP.  Above you need to Windows 7 or a later version.