PSE10 - how to get help online on PC without Internet access?

Similar Questions

• How to upgrade XP Professional service pack without internet access?

  I have a laptop Acer 1355 LC has never been connected to the internet and that is running Service Pack 1, so it has never been updated. I recently bought software that requires a MS later. How is a possible update without an internet connection, there is no antivirus on the laptop program.

  You can start with SP2 first just to see how things are going-

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Are you ready for WinXP SP2?
  http://support.Microsoft.com/default.aspx?PR=WindowsXPSP2

  How to obtain the latest Windows XP (SP3) service pack
  http://support.Microsoft.com/kb/322389

  You may need to know if you need other measures to be undertaken before the update to SP3, for example etc video card drivers

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• Where can I find the Windows XP SP1 Hot difficulty KB822603 update and how I install it on a computer without internet access?

  I'm trying to set up a wireless connection to a desktop computer with a wireless card. It is however that requires an update for Windows XP SP1 hot KB822603 of difficulty. I looked on the microsoft Web site and that you find it. So, I tried simply update service pack 1 by putting it on a disk and download on the desktop. However, it still requires access to the internet, which I did not (hence the reason for the wireless card). Any suggestions?

  A friend to download the file here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=733dd867-56a0-4956-b7fe-e85b688b7f86

  Burn it to a CD and use the CD to install on your computer.

  J W Stuart: http://www.pagestart.com

• How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  The IMEI number is printed on the back of the phone, unless it's an iPhone 6. You can also find the serial number by eject the tray of the SIM card on the right side of the phone (insert a paper clip or similar object into the hole). It is in very small print at the bottom of the status bar.

  It should also be in the box the iPhone provided in if you bought Apple or an authorized dealer.

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Accidentally, I bought the Mac in December and contacted support which helped me to get the right version installed, but now the PC version is not in my account downloads and I need to add it to a new computer. I don't know how to get help with this.

  Accidentally, I bought the Mac in December and contacted support which helped me to get the right version installed, but now the PC version is not in my account downloads and I need to add it to a new computer. I don't know how to get help with this. I don't remember how I got the PC version, I think I have access to my computer remotely and she sent, but I can't find any record of it.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  Got a legal question about the installation of Adobe Photoshop Elements.  How to get help from Adobe using a chat session?

  AdobeTomFaith

  If your program is Photoshop Elements, then you have posted in the wrong forum. Some how your son got posted in the Forum Adobe Premiere elements (video editing). Please re-post your thread in the Adobe Photoshop elements Forum.

  Photoshop Elements

  Wherever your son is, please include Adobe Photoshop Elements version and operating system and the description of the installation problem (error messages, stage of failure, etc.)

  Support Adobe seems to be limited to Adobe cat and is classically limited to the current version which is 13. Then, you the best avenue to success is likely to be through the Adobe Photoshop elements Forum. But that shouldn't stop you trying to determine what kind of support you can get from Adobe cat on your question.

  I would offer this link that is specific for Adobe Chat download and installation

  Contact the customer service (this is not the same destination as shown in a previous post in your thread)

  This link is specifically designed for

  Photoshop Elements

  Download, installation, setting up

  Download and installation

  Panel discussion

  (18:00 - Friday 7 pm Sunday)

  Thank you.

  RTA

• How to get help in downloading and installing 12 EP and 12 first on Win 8.1?

  How to get help in downloading and installing 12 EP and 12 first on Win 8.1?

  Try using a different browser if you experience a problem for the interface to respond correctly to your interaction with it.  If you need help, preovide more information about what you feel when you tru and it fails.

  Please don't start no multiple views for the same problem - your other display information better.

• How to get help when I can't find the serial number

  Hello. I myself am turned on my Chromebook this morning to find my screen was destroyed... it's totally white with a few black spots of looking stained in the corner. I try to get help but cannot do without my serial number, and apparently I have to be able to see the screen in order to get the serial number. Can anyone help?

  You can find a sticker on the back of the machine with the details on... Check also under the battery I have a netbook with stickers in behind the battery compartment... worth a visit.

  If this does not provide you with the answer, can join an external monitor?

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.

• Get a message that says no internet access.

  Original title: IPv4 and IPv6 show without internet access.

  Although the network says it is connected, there is no internet access because another computer already has this IP address.  I checked the IP addresses on the other two computers, and they do not have the same IP address.  He should be awarded automatically, and DHCP is enabled.  I got the modem and the router, the modem directly connected to the computer, tried resetting the INVESTIGATION period, restarted five times and I'm getting nowhere.  I'm very frustrated because it seems it should be good - we have never had this problem before.  All computers on our network are Windows 7 and everything work wireless.  Does anyone have a solution?

  Oh dear.  I thought first of all, I want to check if I wasn't wasting your time.  That's what I would have posted if you did not receive it sorted - McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.  See this "criticism" McAfee reviews - some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update you should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - - - - - - -

  I also developed a low opinion of McAfee - it took them three goes getting my re-installed McAfee work earlier this year and they had clearly received no training on the specific product [Security Center].

  The problem of update has been the drop of water for me.

  I removed McAfee the correct way:

  1 Uninstall using Control Panel, programs and features, select McAfee, uninstall

  2 then I ran their own tool of suppression - Development - in general, their opinion [above] gives different instructions for the use of the tool and says it '' may '' be used if step 1 is of the problems while the tool itself says made in step 1 and always run the tool later [which was in any case the procedure recommended for ages].

  3 so, I downloaded & installed Microsoft Security Essentials instead.  There are a lot of choices but it normally becomes in the recommended lists and it has decent support.

  Help and how-to

  Center solutions Microsoft Security Essentials

  Contact support

  as well as the MSSE section in forum MS answers Virus & Malware.  In this section of the forum I recognised an important factor which I had not thought of before. MSSE is part of the package which also includes MS Safety Scanner & Defender Offline so my tools for the detection of malware online scan & rootkit are now all part of the same family, and I could go on the forum the assistance for any questions I might have.

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• How to disconnect a network unidentified without internet access?

  My laptop running Windows 7 says I'm connected to a network not identified without internet access and allow me to connect to my wireless home connection, but there is no internet connection is.  The only way that I can use internet on my PC is if I connect my phone and use the internet tethering from there, (which sometimes is not recognized).

  Please help on how to disconnect a network not identified!

  Hello

  You can't disconnect from it.

  It's good because of the inability of the computer to connect to your network.

  It detects that there is something there, but it can connect to it.

  Assuming that it is wireless and the wireless router signal is strong, and it broadcasts its SSID (wireless network name).

  -------------------------

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• How to create network without internet access

  I have three devices: air mac, mini ipad and iphone OS. but I can't access the internet.

  How can I create a network without internet access?

  Maybe I just need another router, but sometimes, I just take my mac and iphone. It is impossible to get the router with me everywhere.

• How to get help with Add ons and extensions that stop working

  I have saved passwords and it has stopped working. It's so hard to get help with Moxilla

  rosemarybales said

  I still don't know why the extension button passwords saved with the key icon has stopped working.

  This button displays the saved passwords in Firefox's built-in password manager, is no separate passwords that record you in Dashlane. Can you save passwords in both places? (Well, I guess you do.)

  I have a guess on why it has stopped working. Firefox 40 has some changes to how extensions can work with the user interface, so quite a few extensions that have been more than one year must be updated for Firefox 40. It has been updated on January 10, 2012.

  Anyway, the way of 'long' to display the passwords saved in Firefox is through the Options page, the Security Panel, the saved passwords button.