PSL40E xp restarts after a stop only on the power supply current

Similar Questions

• ThinkPad T410 boots only if the power supply is plugged

  Hello

  I have a really strange bug. My thinkpad T410 (2537-UQF) with an OCZ Vertex 3 SSD boots only if the power supply is connected. If I have a full battery, and try to boot without the power I get a blue screen after about 60 seconds on the screen where the windows logo appears. I have Windows 7 installed fresh a few days ago.

  I think its possible, I've done a few failure with drivers. The power management ThinkPad always stops working after startup. So I deleted the program using the feature "msconfig".

  I'm not really sure what I can do about it. Any idea?

  Thanks for any answers in advance & regards

  Rain

  OK I solved the problem:

  The workaround is to set to battery power settings in the BIOS to auto. If the power in the Bios settings are on maximum battery life, the system does not start if you use the SSD OCZ Vertex 3.

  Hope this helps everyone who has the same problem. I need 4 days to understand this.

  Greetings, rain

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

• Satellite Pro L40 PSL4BE automatically restarts after a stop

  Hello

  I have a question where my laptop start automatically after apparently past Hibernate and shutdown by closing the lid. (I have it set so that it goes into hibernation when I close the lid.)
  The strange thing is that this only happens when it is connected to the power supply. If I close the lid when on battery, it goes into hibernation and remains closed as it should.

  It all started when I changed my power supply mode of "Balanced" to the 'Performance '. Put back to "Balanced" didn't help, and not affecting the setting the lowest. In addition, he used to come back from hibernation automatically once I opened the lid, this happens is no longer.

  I'm not sure if it is a hardware or software problem.

  This weekend I reinstalled the laptop using the recovery disks provided and applied all updates and patches for Vista, but the problem remains, so now I'm leaning more towards it being a hardware problem, even if I have no idea what kind of hardware malfunction could be the cause.

  Does anyone have an idea what might cause this behavior?

  All of these parameters are well known to me because I use the Satellite P200 with Vista. I have tested almost everything about the parameters energy saver and everything works fine. Saving energy for L40 and P200 is the same and there is no difference. Because of this I really can't imagine that there is a hardware problem.

  I hope that you understand very well that you can set this for all profiles of three in two possible situations (on battery and plugged in). What should happen when the lid is closed belongs to Vista power settings. Try it please change all of these settings in the advanced power settings.

  To be honest, I think you make a mistake.

• "Sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you. "windows 8

  Hi so I recently bought a new computer and out of no where he worked in some really annoying errors. This has happened three times, I can't understand a reason yet, AFAIK, it occurs randomly. A few times I start up my computer and it starts just the windows icon, the loading circle is not displayed. If I let it run it will remain still frozen. After a few reboots, he says still 'preparation auto repair' is still frozen. This has happened 3 times.

  The first time I have not jumped into the recovery CD, no problem, used a system restore, it was all good.

  The second time, she actually had a cause, our power went out and my pc was used, then maybe he could have ruined a circuit. So I put the CD, it wouldn't recognize it and if he did, he would freeze just and nothing to do. I tried F8, F12 and F1: he didn't even recognize these keys or react at least based on them.
  After a few restarts I miraculously managed to do recognize the CD and this time I made a cooling system.
  This lead me to think it might be some of my files/programs, but I'm still working on acquiring them all back after the update so I think it is unlikely that. 3rd time: yet once, it happened when I turned it on after a normal closed. It would not recognize the cd or the keys. After maybe 15 attempts, but rather oddly, everything was OK? I also noticed that my Tablet Wacom Intuos 5 is connected it will not start, but if I unplug it, it starts very well. (Driver error?)

  All this is fine and dandy, I can deal with it, but not until recently that error in the title stood. I noticed, that it normally occurs when the computer is in "sleep" or the monitor turns off because it is inactive. If I move the mouse to bring on the monitor, it is just a bright blue solid then the following message: "sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you"appears and it stops. Whenever this happens, it starts up just fine, it is just annoying it encounters this error whenever I use it. I tried to do system recoveries, but it did not help. I can just do a reset or refreshment, but again once I do not want this effort and to lose files if the error is still going to happen. I'm not sure if this is a hardware error, heating, maybe? But I'm not all that experience in these things. As I said, this computer is fairly new, maybe 2 months, then maybe I could just put its warranty policy to use. But if you can think of anyway to help, it would be great thanks!

  My specs are:
  Avatar
  CPU: AMD FX Processor with Six cores (tm)-6100 3.30 GHz
  GPU: Geforce GT 640

  16.0 GB
  operating system 64-bit, x 64 processor
  Windows 8.1

  Hi Kaelie,

  This issue seems to be with the material. As you mentioned that your computer is under warranty. It would be better if you contact the manufacturer of your computer for help on this issue.

  Just reply to us if you are having problems with Windows in the future. We will be happy to help you.

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  https://www.dropbox.com/s/2dtm74f6ki7goa4/minidump.zip

  DAG

  These were related to your driver atheros wifi athw8x.sys I would like to re - install the latest driver available.

  If you continue to plant I remove Symantec and use the built in Defender

• Lightroom CC: Develop module: I see only a blue box with a cross inside. If I select before / after, I can only see the picture before and not after after is displayed as a blue box with a cross inside. I can make adjustments, but I don't see them because

  Adobe Lightroom CC:

  Develop a module:

  Instead of my photos were corrected, I see only a blue box with a cross inside.

  If I select before / after, I can only see the picture before and not after (the corrections).

  After appears as a blue box with a cross inside.

  I can make adjustments, but I do not see them because the image after is not visible, it is a blue box with a cross inside.

  Thanks in advance for your help.

  Disable the option of processor graphics use in the performance of the LR preferences section.

• Can host pause a participating video for all participants?  Documentation said yes, but when I test it stops only on the host screen.

  Can host pause a participating video for all participants?  Documentation said yes, but when I test it stops only on the host screen.

  I think you're right. When you stop your video stream live, he stops for all participants. When you stop the video stream for someone else, you pause for only yourself.

  I see nothing in the documentation to force a break from the other video. What documentation you are looking at? Adobe Connect 9 * video in meetings

• After say - and reconnecting battery CMOS, power supply T400s has stopped working

  Hi all

  A few days ago, I had to say and then plug back the CMOS battery. After putting my T400s back together, the power supply in power did not work more (the computer is plugged in and power cable works fine with other computers, but it will not provide power to the T400s). Cannot charge the battery either!

  A I unplug/break something in my quest for reset CMOS? There are simple things that I could try to get it working again?

  Thank you very much

  K

  It doesn't have to be plugged into the power problem, but a discharge of static electricity isolated were able, then you could also try to reset the bios of the laptop again by removing the cmos battery.

  Most likely, you've killed one of the power circuit element when you tried to remove the cmos battery without first statically discharging yourself.

• NAS200 after power supply current

  Hi all

  could you please confirm this behavior after a power failure:

  -the Sin starts normally and for a few seconds I can access via the web. But if I try to force the closure, he answers me back is not possible due to the scandisk is underway

  -After 2 minutes, where the green light turned on I see the two light of the two bays which lie on. The problem is that the I only have one disc inserted into the SIN!

  -the system is not accessible. I read the manual it is normal when the sin is the scandisk. But it is not clear to me it does, because flashing power/ebaydisk1 noither.

  Any suggestion?

  When the NAS200 sees that the disks were not closed properly, he made a blink of LEDs from disk at startup for you know that it is the cleaning of discs; they stop flashing when the cleaning operation is complete. If I understand correctly, this is not what you see: you see two disk lights on.

  Normally you should never see both lights of disc on if only one drive is installed. Try unplugging the power supply and then restarting him. Maybe it was just a small problem and it runs very well this time.

  If it's the same thing when restart you with the installed drive, try running it without disc and see if the lights are still to come. Both hard drive lights should turn off if no drive is installed. If they remain, you may have a hardware problem that causes the software hang (or perhaps to trigger a kernel panic).

  If it starts fine without the disc, but both lights keep coming with a disc, there may be a problem that can be fixed by connecting the drive to a PC and booting with a CD of SystemRescueCD. You may need to ask someone who knows Linux to help you with that.

  = Jac

• Satellite P100-347 does not stop when it is used on the power supply

  I have a new laptop of P100-347 games and I have 2 problems. Can anyone help?

  (1) when I use the usb port on the left side of the laptop, the laptop seems to restart the same time that I plug anything into it! I called Toshiba and said to update Bios, so I did (version 240 up to 330). But as soon as I did it started to the following problem:

  (2) when I run the laptop on battery, I can turn off the phone by pressing the power button or by clicking the windows locked. But as soon as I plug the power supply whenever I want to stop the laptop, the laptop just restarts. Does anyone have any ideas?

  Thanks for the comments!

• Propeller works only with external power supply

  Hello

  Just got my Helix and I have some published, one of the biggest problem so far is that it will only fuel upward and stay on with external power supply, when I dock this works very well, if I disconnect it it stops, if I plug the power supply into the Tablet light it up, but as soon as I remove the power cord it will turn off I checked and the batteries are charged, any advice at 100%?

  Thank you

  Thanks for the reply, I called Lenovo technical support and they thought it was the motherboard, technology has changed and he made similarly he suspected a defective battery, it replaces and it works fine now, so it was a defective battery on the Tablet, was not getting charged, Lenovo technical support was great, fast and very apologetic the laptop so far, thank you for all the help that love.

• A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  Yes.

  http://www.Apple.com/Mac-mini/specs/

  the voltage may vary from 100-240 V AC.

• Satellite M30X: fans do not stop if plugged into the power supply

  Hello

  I have a M30X and months fans when I'm connected to the power supply do not stop. It's also stopping often enough. However, the laptop is not hot. Do you have any idea?
  Kind regards

  Armando

  Hello

  If you connect the adapter to the laptop of Toshiba power saver change consumption patterns. Maybe the power mode with a different setting in the a? Basic setupa?. Please check the cooling method and change it to lower the level.

  But of course, the dust and debris could have a bad influence on fan behavior.