PT-104 USB issues (UsbPt104Enumerate)

I try to use both of these devices in parallel via the USB port, but to do the function UsbPt104Enumerate to answer them correctly. One device works just fine as an example.

I tried to follow the programming of the http://www.picotech.com/document/pdf/usbpt104pg.en-2.pdf guide, but frankly I don't know what I'm doing.

The result is always either an accident or an empty string.

Anyone who has both of these devices used with success at the same time?

LV 2010 extract included

Thanks in advance

DA

Solved. There is error in the example VI for USB comms where the correct serial number has not been wired for the node of the DLL.

See you soon

DA

Tags: NI Hardware

Similar Questions

  • frequency DAQ USB issue (6211)

    Hello

    I'm a newbie when it comes to NOR and data acquisition. I bought a NI USB 6211 and connected a resolver with 400 Hz and ai1, ai2 (CSR) (sine and cosine signals). I also have the reference of the power supply connected to ai3 (differential) of signals. Pockets of tension give a +/-2.5 Volts from all sources input signal.

    The problem is that the signal moves to the right. She moves uniformly for all signals.

    Now, I wonder is it possible to synchronize the input signal so that it moves? or what I need to resolve this issue programmatically? I'm programming in C with standard DAQmx drivers (v15.1). But I saw the same problem with Labview and Measurement Studio.

    Thanks in advance for your suggestions.

    Kind regards

    Gerhard

    I guess I just find the answer to my question here:

    http://forums.NI.com/T5/LabVIEW/DAQ-Assistant-can-t-lock-the-signals/m-p/1332484#M542285

    I guess I have to ask in the forum section of C++ for an example of a software lock.

    Kind regards

    Gerhard

  • U2913WM USB issues

    I have the cable connected to the USB 3.0 motherboard USB upstream. (Have tried both of them). Can I connect USB 2.0 devices in any port of the monitor & they work perfectly, but when I plug in a USB 3.0 device, they are not recognized by the operating system. I tried 2 x USB3.0 flash drives and none of them work, but they work when attached to the motherboard. My little portable drive Seagate will not work either unless (and this is the good part) I have the cable upstream to a USB2.0 port. The only thing I can think is that it is a driver issue, as it appears in the device under 'Generic SuperSpeed USB Hub' Manager that I can't change. Operating system is Pro Win8.1 x 64 thanks for any help Dave Cheers

    I decided to see if there were updates of the USB 3.0 on the site of ASUS driver. There's a new file to download so I tried it & bingo, the hub is now working properly. Just thought it was weird that my external hub 3.0 worked well, but would not be the monitor. in any case, seems all good now, thanks for your help, Dave

  • USB issues after upgrade to 12.0.1 12.1.0?

    I use a scanner to use high range I always use in my virtual machine (because there can be no linux drivers). Its a Fujitsu ix500. The host is ubuntu x 64 14.04 LTS. The guest is Windows 10 x 64. I ran this configuration for some time and have had no problem (since vmware workstation v.9). Recently I have upgraded from VMWare workstation to VMWare workstation 12.1.0 and scanner 12.0.1 enough work. The material of the scanner works fine, but when the scanner finishes analysis and attempts to send the data through the USB software Fujitsu software will just stay there and to block/spin forever. As a first step to be honest, that I don't blame it on vmware.

    I tried following things:

    1 reinstall the software of fujitusu

    2. create the new virtual machine and install fujitsu from scratch.

    3. has tried a new USB cable and plugged into another USB port

    These things has not fixed the problem. I installed 10 windows and the host and, of course, everything started working. Then I reinstalled ubuntu. I finally found a way to make it work. Replace the 3 USB USB 2.0 USB controller compatibility. I obviously don't want to keep like that since I use some USB 3 devices.  I hope that this problem is fixed in the next release, but until then what else can I do otherwise than lower compatibility USB?

    Hello

    Some problems with USB have been reported on the latest versions of the workstation and of the merger.

    See for example here: https://communities.vmware.com/thread/527472?start=0&tstart=0

    What I've seen so far is the recommendation to downgrade to the previous version (12.0.1) If you happen to come across this problem.

    Of course, also has its down sides because none of the issues resolved in 12.1 will be in this version.

    --

    Wil

  • Card SD & USB issues after update of El Capitan

    Hi all!

    Just updated to Yosemite's El Capitan.  Running iMac (21.5 inch late 2009) - to update of Yosemite point has been completely up to date as well as all software and drivers.  Now problems after the iMac to wake up in the morning with some of the built-in ports.

    1. SD card reader - have to restart so that this works, but only works for an hour or two, it is more readings.

    2 ports USB - external HD holding that nothing else than music files must be disconnected and then reconnected to be recognized and to mount.  Anomaly is that Time Machine on back of the iMac USB continues to function properly and rises when waking from sleep in the morning.

    3-4 ports USB hub plugged back has only 2 operational ports in the morning, must either be disconnected and then reconnected to have all four ports work.  It works sometimes for the rest of the day or only works for one hour UX as well.

    4 keyboard (yes I prefer a cable on BT) takes a minute or two to be recognized after the awakening of fashion 'sleep' in the morning.

    I tried to reboot my machine?  Yes, several times.

    I tried to reset the SMC?  Yes, several times.

    I tried to reset the NVRAM/PRAM memory?  Yes, several times.

    Any suggestions on additional solutions without getting really heavy in the Terminal?  Not really keen to try some of the recommendations Terminal found here on communities, as I do not play with the programming of the OS.

    Thank you!

    Thanks for the nine people who have seen this post.  Unfortunately no one answered, so I 'solved it' of it the only way I knew how.  Rolled back to Yosemite.  I hope that the new Sierra OS will be an improvement on El Capitan.

  • EliteDesk 800 G2: USB issues

    I am able to boot from USB key, in order to install Windows 7 x 64. However as soon as I get the: install windows 7 window (language to install, time and currency format keyboard or input method) USB keyboard and mouse do not work and I can't go any further.

    Any ideas will be appreciated, thank you in advance.

    Hello:

    Ether use a PS/2 keyboard and mouse, or you need to run this utility Intel USB...

    There is a Readme file for instructions.

    https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

    I also assume that you went in BIOS and enabled legacy mode and disabled startup secure, correct?

    W7 is not compatible with secure startup.

  • Toshiba dynabook MSATDXRA.002 USB issues

    Hello world

    I came here because I am completely desperate and I think to buy a Mac and forget about this computer that drives me crazy.
    I have a Toshiba dynabook with Windows XP and it worked perfectly in the last 2 years but 4 weeks ago started to drive me crazy. I bought a printer (Lexmark Z2320) USB and a USB optical mouse for my computer.

    In the past, I have no problem with the USB things, and I installed an Ipod and another mouse who died...

    The thing is that now I can't get any new things USB to work, and my new printer and my new mouse do not work.
    I installed the printer drivers and mouse drivers and my computer recognices perfectly the two pilots, but as soon as I connect it to my USB ports, it is said there is some kind of problem and I need to contact technical support...
    I tried to uninstall and reinstall the USB ports, I tried to uninstall the Service Pack 3 for Windows XP, I have re installed the printer drivers, I did almost everything that came to my mind... but nothing.
    I already contacted Windows XP, and Lexmark and none of them want to help me (I even thought of them demanding... but I want to give one last try)...
    And desperate, I came here to see if someone can help me...

    Thank you in advance

    First of all, you need to uninstall the drivers/utilities USB related in Add/Remove Programs, and then restart and see what happens.
    Then, you can try to reinstall the USB drivers. Re-install the last driver Chipset Intel drivers from Toshiba Web site section.
    Then you should google the exact error message to find a possible solution.

    If all else fails, back up your data and reinstall Windows to its factory State, of the execution of a recovery.

  • Satellite A - USB issues and would not start

    It started with my computer (laptop) from freezing. Then my USB mouse leave, make me use this tablet (I hate that seriously), then the computer would not simply start so I removed the battery, the computer starts, and then it froze again, put the battery back in, computer started again. Things continue to go.

    Today, I got the Toshiba (my baby) at Staples (free checking up), they found nothing wrong. Got home, starts very well - the 1st time, I tried to reinstall my USB mouse and quess what - would not start. Out the battery, and here we are.
    Oh and by the way - I would like my rear USB mouse - I said "I hate this tablet.
    Battery has been for about 2 hours now without any problems

    Can anyone HELP?
    Thank you

    What computer Satellite phone do you have?

    Have you tested without USB mouse? Maybe this is causing the problem.

    And have you tried a BIOS update? You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  • Windows 7 USB issues - ENVY HP dv6-7245us

    I have recently reinstalled Windows 7 on my system that I had a lot of trouble with Windows 8, everything has been properly installed except for the 3 USB 3.0 ports, none of them work now and I can't find the drivers for them, please help, I need at least 1 ports to work for my external hard drive.

    My laptop is a HP ENVY dv6-7245us

    Hello:

    Install the drivers from the Chipset AMD and restart.  You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • USB issues on vista Ultimate

    I've updated from Vista Home to Vista Ultimate. Now, whenever I insert a flash drive, it is said "there may be errors, you want to analyze and repair" and then after the fact every time that it will not copy large amounts of files (in GB) hard drive flash drive and write-offs of midway. How should I do?

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
    Devices disabled - look around (with the exception of USB controllers) for your devices (can have
    zero or more than one) and top - right click UNINSTALL.

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
    as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
    Is there.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Serial RS232 adapter USB-issue

    The question that I have is Windows "forget" that he uses the device.  I will transmit data, and all goes well when the transfer suddenly stops and the program I use wrote that the device settings are wrong.  But the device still shows to work correctly in Device Manager.  I try another program and it does the same thing not programs.  And the question is the blindly.  He'll run right for hours and showing a defect. or he'll do all day every few minutes.  Don't know what to think.  These issues would be present with a PCMIA RS232?  I have a slot open in this laptop to try if you think he can.  I just need an option that I use this to DNC my CNC machining centers here at work.  So it should work right or get the scrap parts.   Any information is greatly appreciated.

    Thank you

    Bryan

    Brian those can be very problematic. Check with the support of the manufacturer if possible for all known
    questions. Back in the day, I used to pull my hair out trying to fix problems with those, dongles, and
    similar material.

    Check also with the support of any device you use the adapter - maybe there is
    updated drivers.

    Definitely check with support of system manufacturer (manufacturer of motherboard for customized systems),
    their documentation online and drivers and ask questions in the forums about known problems.
    Update the BIOS, chipset of low level driversand the major device on-board and separate
    drivers. These all can have an effect on your question.

    You are running an antivirus? If for those that cause problems with the adapters. If you need a
    Antivirus on the system I'd use MSE - free. Uninstall all 3rd party antivirus then
    run the removal of its creator tool to avoid problems causing remains.

    List of tools to clean/uninstall anti-malware programs
    http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

    Uninstallers (removal tools) for common antivirus software
    http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

    MSE - free
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • USB issues after installing Windows 7

    Hi guys,.
    Yesterday I upgraded my Vista 64-bit for Windows 7 64 bit PC. I did a clean and updated installation in the form of my readers in the process. Everything works fine except one thing.
    I bought a new audio interface for recording and playback of music. It's a Focusrite Scarlett 18i6. I installed all the software including updates since the Focusrite website and everything seems to be ok. I started to play music from itunes to test it and it worked well for a couple of minutes, then it disconnects just himself.
    It shows that it is connected in the Device Manager and the windows volume control panel. But it disconnects from the control panel of mixture of Scarlett and itunes stops playing because it no longer recognizes that there is an output device.
    The only way to let him play again is to unplug and plug back the power of the interface, and then it will work for a few minutes or a few seconds.
    I tried to update all my drivers in Device Manager. Unfortunately Acer does not all the drivers for my PC and windows 7. (Aspire X 1700).
    I have downloaded all Windows updates.
    I even tried to reinstall Windows 7.
    I'm trying this with nothing else installed on my pc is not a software conflict.
    I have an old XP computer, age about 6 years old and works like a slug, but it works with the interface very well. So I know that the problem doesn't lie with the interface.
    I saw somewhere that there is a known problem with USB drivers when using Windows 7, so I downloaded the patch, but it is said that it is not necessary on my PC.
    I'm very, very close to buying a new PC that I don't really want to do until I'm sure it's a problem with my PC which can not be repaired and that the same thing won't happen with a new Windows 7 pc.
    And Yes, my interface is compatible with Windows 7.
    Any help would be greatly appreciated as I have tried everything I can think.
    Thanks in advance.
    Emma

    Hello

    Hello
    You don't have to remove the keyboard and mouse USB. Try to reinstall the USB controllers. Visit the site of the manufacturer for the latest available drivers.
    http://support.Acer.com/us/en/product/default.aspx?tab=1
    As you mentioned that Acer has no drivers for Windows 7, you can install the drivers for the chipset in Vista compatibility mode and check.
    Make older programs in this version of Windows
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  • T400s SATA/USB issue

    Can SATA/USB port on the T400s handle a 500 GB 5.25 "disk with a suitable cable, or this size takes a lot of courses?

    IM afraid this is not possible because 5.25 drive needs 5V and 12V and USB/eSata connector is only 5V I know, external power even when supply will be necessary.

    David

  • Issue R850 2R satellite USB ports-

    Hello!

    Because today, I have problems with the USB ports after several months of trouble free use. I started pc and everything worked normally for the first 10 minutes.

    I got the system message: "1 USB Port stopped working.
    Please disconnect device attached to it. "(something like that), and I didn't that I pressed OK option.

    After that all my ports (I had the only mouse and keyboard) stopped working (out of 3). I tried troubleshooting, disconnect devices and plug their return, deactivation and which allows once again in the device manage anything.

    The only thing that helps mobile computer restart to get the same error after 10-20 minutes.
    I did not anything unusual on laptop today. : S

    Hello

    I found some interesting tips from Microsoft on similar USB issues.

    + Disable and re-enable the USB controller +.
    + To disable and re-enable the USB controllers, follow these steps: +.
    + 1. Click Start and then click Run. +
    + Note if you are running Windows Vista, click Start and then use the search box. +
    + 2. Type devmgmt.msc, and then click OK. Device Manager opens. +
    + 3. Expand Bus USB controllers. +
    + Note that you need to scroll down to find this point. +
    + 4. Right-click the first USB controller under Bus USB controllers and then click on uninstall to remove it. +
    + 5. Repeat step 4 for each controller USB is listed under Bus USB controllers. +
    + 6. Restart the computer. After the computer starts, Windows will automatically check for material changes and reinstall all USB controllers that you uninstalled. +
    + 7. Check the USB device to see if it works. +

    Other advice:

    + You can disable the USB selective suspend feature to work around the problem by modifying the registry. The USB device does sometimes because of a race condition in the selective suspend feature.
    + 1. Click Start and then click Run. +
    + Note if you are running Windows Vista, click Start and then use the search box. +
    + 2. Type regedit and then click OK. The Registry Editor opens. +
    + 3. Locate and then click the following registry subkey: +.
    + HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servi ces\USB +.
    + 4. If the DisableSelectiveSuspend registry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps: +.
    + a. On the Edit menu, point to new, and then click DWORD. +
    + b. type DisableSelectiveSuspend, and then press ENTER. +
    + c. On the Edit menu, click on change. +
    + 5. In the value data field, type 1 to disable the selective suspend feature, and then click OK. +

    Restart the device and test again

  • I can't stop by Satellite M305D-S4830 because of the accident of USB

    Ever since I have had this laptop; She has always had a problem with the USB crashes the computer.
    The message said: it was caused by a USB.
    When I check my ports USB it is said that there is an unknown object in the ports, well there's nothing in this port.

    I can t turns off my phone, it always says that it is s a USB issue and it crashes every time.
    I can t even closed my laptop or put to sleep without him saying that when I come back to "Windows has recovered from an unexpected fall."

    How can I get around this? It's really frustrating.

    Hello!

    As said by Akuma, remove all 3 USB driver.

    Make sure you have all the Windows Updates and patches installed.
    Check the Windows Update Web site.

    Make sure that you have installed the latest chipset driver. Search on the Toshiba site for an update:
    http://www.CSD.Toshiba.com

    Good bye

Maybe you are looking for