publish 2014 for the iphone with flash cc 6

I did an application with flash cc 2014.

When I publish with AIR and test it in the iphone 6 the apllication does not cover the entire screen.

There are black margin on the top and bottom.

How to publish the application in order to cover the entire screen?

16:9 devices only fill the screen if you have included start-up of 16:9 screens. If you do not, then you get a version of 3:2, with black bars on the sides.

Green, include the [email protected], which is an image of 640 x 1136 needed to support the iPone 5. That be enough to make the iPhone 6 works well also. Subsequently, you can add all the right to boot from different devices screens.

Tags: Adobe Animate

Similar Questions

  • Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

    Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

    This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

  • Disadvantage of developing for the iphone with air?

    I have developed a few games with flash and wanted to try my hand at a few mobile apps. Most of my games are point and clicks and since I already know AS3, AIR appears to be a very good option.

    I asked about Android - I intend to targeting first - and it appears that a major drawback is that many AIR apps woud require additional software on older phones and that the required software is a bit a space hog.

    What are the disadvantages for development for iphone? IOS requires special software to play AIR apps? They work particularly slow on the iphone?

    (1) the most recent version of air is only compatitble with ipod 3/4 generation and iphone 3GS and iphone 4

    (2) as with android, you do have access to all the features of the phone like tongues (contact lists, push notifications, etc.)

    (3) air for IOS is still a fairly new technology, so there is / will be bugs and problems you will encounter

    (4) a lot more care needs to take for optimization that you would normally do on a desktop application

    (5) the size of each IOS app is minimum 4 MB because the duration of air is conditioned with each app.  This allows ios not its users install air runtime separately as android, but it also means for much larger applications according to your original size

    That being said, I am relatively satisfied with the speed that updates / changes are coming.  IMO, with a few other settings and optimizations, air will be really able to compete with the mother tongues for some projects.

    Hope this helps

  • flashes be available for the iphone?

    I'm workin on html5 (edge + dreamweaver) and he always had problems, if flash will be available for the iphone, we can continue our path with flash?

    It's true, iPhones do not support Flash Player. Who really shouldn't affect your Flash designs with all the new features with Flash CS6. Do not try the box tool for CreateJS to publish your Flash to HTML5 content and let us know if you have any questions.

    Kind regards

    Suhas Yan

  • What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages outside the home page.

    What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. Unfortunately, I lost a lot of these new applications. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages other than the home page. Thank you!

    'Stock' apps are part of the installation of iOS and cannot be removed, so there is nothing to verify or prove.

    When you move to a new phone, just need restoring your old backup phone and compatible applications will be synchronized to the new.

  • Add support for the iPhone in an application already published

    Hello

    Is it possible to add support for the iPhone to a multi-folio application which we have already published in iPad format.

    If so, what are the steps before you download a .ipa file revised to Apple for review?

    There are a few paragraphs on the update of the application in general on p58 here but nothing specific to add support for additional platforms to an existing application.

    Thanks in advance for your help.

    Ross

    You must do two things to make your application work on the iPad and the iPhone:

    1. create fact sheets for the iPhone.

    http://help.Adobe.com/en_US/digitalpubsuite/using/WS4cb2576c7954973c-70d16164136e6c7cfbc-8 000. HTML

    2. create and submit a new version of the viewer using DPS App Builder. Select iPhone and iPad. Use the same files mobileprovision and CERT.

    You also need to create some application icons and splash for iPhone screens.

  • Your binary is not optimized for the iPhone 5, Application Loader, ERROR

    I use flash builder 4.6, Air 18,0 on windows 7.

    I receive the error.

    Your binary is not optimized for the iPhone 5 - New iPhone apps and updates of application submitted must support 4 inches on the iPhone 5 and must include a launch image with the size-568 h modifier immediately following the < basename > the filename part of the launch image. The launch images must be PNG files and located at the top level of your package or provided in each .lproj folder if you locate your images of launch. Learn more about the iPhone support 5 and the app launch the images by reviewing the ' iOS Human Interface Guidelines' to 'https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/MobileHIG/ IconsImages/IconsImages.html#//apple_ref/doc/uid/TP40006556-CH14-SW5' and the 'iOS App Programming Guide' to 'https://developer.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammin gGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-W12 S'.


    I packed all type of style, one by a [email protected] Default.png, Default-568h@2x~iPhone.png etc, but eror won't.

    How to remove the error. I packed images and pictures on splashimage... one by one page by default.

    Now I am confuse to be it's mistake or apple Air or my error of flash builder.

    Please can you sat down.

    regarding.

    Naser.

    [email protected] is the size of the requested file, and it must have dimensions of 640 x 1136.

    Make sure that this file is included in your IPA in the top-level directory.  A good way to check is to rename "myapp.ipa" to "myapp.zip" and unzip and look in the top level of the folder structure.

    To get Flash Builder to include it in the IPA, place it in a folder that is included in your flash builder source tree (I use the "system" folder and make sure it is added separately to the project) and make sure that you have checked in the content area of the package:

    Additionally, make sure that you have "copy the files not included in the output folder", checked on this screen:

    Hope that helps!

  • Magazines for the iPhone 4 to 6 +.

    Hello

    I'm designing a magazine for iPhone 4 by 6 + and have a few questions.

    I need the best resolution for each phone so I do a folio for each iPhone screen resolution. When I get to publish them on an iPhone 6, for example, I'm going to see all folios below them or the phone will recognize its screen size and just show the specific folio?

    The next question is about the publication for the iPhone 6. I see the content viewer is not yet available for this phone, but for the publication, it will be there, right?

    The last is on the small black scroll bar that appears to the right of the content viewer and design of overlaps. After the publication, the scroll bar will be disappears?

    I think that's it!

    Thank you for the attention!

    John

    Take a read through the help of Bob on the "renditions" topic: Digital Publishing Suite help | Creation of "renditions" folio. It should answer most of your questions. For now, you can create a version of 6 specific iPhone (the viewer will not appear it), but it's ok that the rendering of the iPhone 5 is so close in size, that you will probably never want to go through the effort to make an interpretation just for the iPhone 6.

    When you generate a viewer customized with App Builder, you can decide if the scroll bar automatically hides.

    Neil

  • I have a charger for the iPhone I'll be able to go to the Apple Store and trade it for a new?

    I have a charger for the iPhone I'll be able to go to the Apple Store and trade it for a new?

    A1yvng wrote:

    I have a charger for the iPhone I'll be able to go to the Apple Store and rare it for another?

    I'm sorry, but that 'rare' mean in this sentence? If you are having problems with a charger and the phone, he came up with that is still under warranty, the unit would be under warranty. It will have to be reviewed by Apple, they make determinations. If you have purchased separately the charger, then it must be aged less than 1 year, and the review itself would apply. I hope that's what you're referring to.

  • There was a problem downloading the software for the iPhone error - 39

    My iPhone 4S device is disabled, connect to iTunes, when I was connected to the laptop cannot restore and give this massage:

    There was a problem downloading the software for the iPhone "iPhone". An unknown error occurred (-39).

    Make sure that your network settings are correct and your network connection is active. or try again later.

    Hi mgdabko!

    I see that you get an error message when you try to connect your iPhone to iTunes.  I know it's important to have your iPhone works properly, and I'm happy to provide assistance.  39 error often indicates there is a problem with the internet connection you are using, so you should try another Internet if possible.  You can also try all the advice in the following article:

    If you see an error when you update or restore your iPhone, iPad, or iPod

    Thank you for using communities of Apple Support.

    See you soon!

  • A software update is removable which was intended for the iPhone OS?

    I have a 6 s iPhone, iOS 9.3.1 and I updated the last update but my iPhone 6s has not been good since.  Unable to connect to wifi properly.

    The update was for the iPhone 6se but didn't know I shouldn't have installed.  This update may be removed from iPhone6s?

    The update was for all iPhones 4 s from

    I have a 6 more on 9.3.1 without problems - with regard to the WiFi

    Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

    1. Please see recommended settings of WiFi routers and access Apple points.
    2. Check if the problem is related to a single device and if other devices connect normally-
    3. If the 2 answer is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    5. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
    6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    9. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
    10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.
  • How to convert an apple store gift card to buy apps for the iphone?

    How to convert an apple store gift card to buy apps for the iphone?

    Try to buy a gift card iTunes Store with her. Apart from that, you can't.

    (140402)

  • A good day! Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

    A good day!

    Make an order for the iPhone to your site, the provision of the code ' reservation number is: B2 * Q0A "many skills information. It is impossible to confirm the order. What is the problem?

    It is a support so nobody user forum here can help you. Maybe if you release with Apple itself.

    http://www.Apple.com/contact/

    There are links here to the online store.

  • My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

    My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

    No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

    Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

  • Size/resolution for the iPhone?

    Hi, is there a resolution/size I can work on that will look great on iphone 4, 5 and 6?

    Only you guys usually use to create applications for the iPhone?

    Thank you

    Digital Publishing Suite helps | Creating documents for multiple devices

    iOS

    For iPad, you can create a 1024 x 768 single Folio that works on HD and SD iPads. Similarly, you can create a 480 x 320 single Folio that works on iPhone HD and SD (see creating a multi-rendu articles). We recommend that you create a rendering of 1136 x 640 extra that works on the iPhone 5 and 6 devices.

Maybe you are looking for