Publish the time on FCP parameter

Similar Questions

• Limit on the time settings shared filter criteria?

  Does anyone know if there is a limit to the back where the time for shared parameter filters can go? Is there still a limit (as can only look 12 months worth of data), or is it as long as the data is available? I know that in the past there is a limit to how long backdata Eloqua you saved, wasn't sure if it was still the case.

  For example, in a shared filter, I want to set filter criteria for "Contact has opened of group e-mail XXXXX emails in the last 24 months" - it saves, but he will seek in fact to 24 months of data?

  Thank you!

  FYI - met with Eloqua Support, and they have confirmed, there is no time limit in both the area of filters shared and ideas. Their exact response is below:

  For an overview: the answer to your question is that there is no limit. If in Insight do you a range of time custom and select passed 2 years, if there was activity at the time where you will be able to report on this issue. On the contact activity tab, the limit should be 4 months for activities before you can see it is no longer (but it will still exist in Insight and be available for reports).

  For filters Shared: there is no limit as long as the information is on the contact record. If the contact has actually received 3 emails for 4 years we will see this filled in a segment.

• Mouse buttons go at the time of publishing

  Is there a way we could take advantage of these additional mouse buttons when you change the code in LabVIEW?

  I think undo - redo perhaps, anyone knows how we can adjust LabVIEW or Windows?

  See you soon,.

  I have not fully committed to use it, but I think that X-Mouse button control can do what you want.

  https://www.highrez.co.uk/downloads/xmousebuttoncontrol.htm

  With her, I was able to implement a rule that when the 'LabVIEW.exe' application is active, to make the middle mouse button simulate pressing CTRL + space to open the quick menu.  The Middle click has not been used for anything anyway.  Also, I have set up my buttons previous and next to scroll left and right, but I do only rarely that I think I can try to do something else with it.  You can put up to a cancellation and again (as long as you make a key CTRL + SHIFT + Z for redo) If you think you might like that.

  Honestly, the hardest thing for me is to determine what I want these additional functions to do.  Undo redo is not bad but my left hand is on the keys to my house most of the time anyway, I sorta want it to do things that are normally more efforts.

  EDIT: A logic agree but not very hard to do now, is I mapped my back and forward for CTRL + wheel.  Does that mean it is when I'm in a case structure or structure of the event, by pressing back and moves forward to the previous case or in a structure of multiple cases.

• Symbols customized areas list at the time of publishing

  Hello guys,.

  the only way I know to date to define a symbol personalized in the ListBox uses the Invoke node, so I need to run my code to store an icon in control, once it's done I can remove my reading PNG file, invoke the node and keep coding. Subsequently, I can assume that the custom symbols are stored in the control and display them correctly by setting an index in the property node...

  Is there a way to do this without running the code? Just using 'Import from clipboard', or anything that could be done at the time of editing using the menus of LabVIEW?

  See you soon,.

  Jimmy

  Oh, there's a way, using an invoke node to set the image and symbol, and then set the symbol.  Attached is an example recorded in 2011.

  EDIT: Sorry re-read the post and realize that this is not what you are looking for.

  Double EDIT: But what you want may be this right click menu that allows to define symbols.

  https://decibel.NI.com/content/docs/doc-43211

  The source was built off the coast of which could be modified to run in the Tools menu in older versions of LabVIEW

  https://decibel.NI.com/content/docs/doc-25938

• Event of the timer with parameter

  Hi guys,.

  I've implemented a BPM inputs 3 times with 3 timers. I need set the TimeDate of the Timer event with three entries. How can I do? I tried with create a DataObject object with three attributes when, before the activities of the timer, I attribute the entries for the data objects and on the Date of the time, I inserted the phrase with the attributes of data object, but it does not work!

  I also tried to insert three string as inputs (instead time) and then I insterted a transformation before the activities of the timer, but it does not work too...

  Please help me!

  Thank you

  I solved insertion-'2 h' in the expression of timer... So now, the question is: why the DateTime input increased by 2 hours? I'll open a topic...

  Thank you

• Debug the Version Works, published the Version Does not

  I have a strange problem. I have a desktop in Flex app that works on Mac and Windows. I use IntelliJ to develop the application, and when I debug the application on Mac and Windows using IntelliJ, it works as expected. However, on Windows when I publish the application and run it, it crashes every time after completed certain steps in the application. As this happens not during debugging it, I have no way to determine the cause. Could there be something in their own country worng with the AIR 3.7 and 3.8 Runtime that is not happenning when you run the application using ADL?

  Lee, you know a few api will work on mode debug, but not worked on the final version?

  For example:

  You can load a swf without loaderContext parameter resource file before AIR3.7. It is worked .but. If you use AIR3.7 +... .you should load swf as follows

  "var loaderContext:LoaderContext = new LoaderContext (false null, ApplicationDomain.currentDomain),

  Loader.Load (url, loaderContext);

  "

  It's just a reminder to you.

• In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

  In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

  TIA

  In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

  Good luck.

  Russ

• Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time

  Hi everyone :)

  I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
  6 GB of Ram
  640 GB HHD
  1 GB Nvidia GT330M graphics

  the problem is that since I bought it and its slow I don't know why!
  Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
  last day I did the cover and I noticed that the laptop is becoming slower!
  It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
  Please help me.

  Hello

  First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.

  If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
  Run msconfig and check the Startup tab
  Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessary

  Note: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.

• How to publish the source code

  How best to publish the source code?

  I need an alternative to fall back on.  How I would go to this topic if I had to use HTML.

  My chance to validation code has deteriorated over time. I did it via:

  

  I take the plain.

  Yesterday, when I tried to insert the Bash source code.  I had a lot of white lines.  I think that leading # confused CSA.

  
  #!/bin/bash 
  
     # so anyway, output from the echo statement is sent to the terminal.  The operands < and >
     # allows you to change where it is going.
    
  
  # default redirection  
  
  # 0 stdin  -- standard input
  
  # 1 stdout -- standard output, non-error output
  
  # 2 stderr  -- standard output for error messages.
  
  # had not used the exec statement before, the concept of the exec was
  
  # readily apparent to me.
  
     
  
  # of course, I ripped this off.  Turns out you want to preserve where input stream 0 is
  
  # coming from. The hack moves input stream 0 to input stream 6.  Pick any number
  
  # that is allowed.
  
     
  
  # save standard input in file descriptor 6 
  
  exec 6<&0 
  
     
  
  # now we say where we want input stream 0 to come from. 
  
  # bash has an unknown to me number of commands that read from input stream 0
  
  # via redirection we can change were stream 0 is coming from.
  
  # redirect standard input to be from the passed file 
  
  exec 0<${1} 
  
  count=0 
  
  while read lineIn  
  
  do { 
  
  # bash syntax is bizarre.   
  
  # The (( )) says it's a math expression 
  
  (( count++ )) 
  
  echo "${count}: ${lineIn}" 
  
  } 
  
  done 
  
  # put the input streams back to where they were before. 
  
  # Nice, but when the script quits they will all be put back to where they were.
  
  # Of course, I copied this stuff.  Syntax isn't the obvious.
  
  # close input.  May not need.  My innovation.  Seems nice.
  
  exec 0<&- 
  
  # restore file descriptor 0 should be standard in 
  
  exec 0<&6 
  
  # close file descriptor 6 for reuse. 
  
  exec 6<&- 
  
  echo 
  
  echo "Total lines were ${count}" 
  

  Do you get the extra lines before applying syntax highlighting? You can simply change the Courier New font.

  #! / bin/bash

  # Anyway, Exit statement echo is sent to the Terminal.  The operands< and="">

  # allows you to change its future.

  default redirection #.

  # 0, stdin - standard input

  # 1, stdout - output standard output without error

  # 2, stderr - standard output for error messages.

  # did not use the exec statement before, the concept of the exec has been

  # obvious to me.

  # good course, I snatched it.  Turns out you want to keep where the input stream 0 is

  # coming. The cut moving the input stream to the stream input 6 0.  Choose any number

  # who is allowed.

  # Save the standard entry in the file descriptor 6

  exec 6<>

  # now say us where we want to enter flow 0 to come from.

  bash # a a stranger to me the number of commands that read from the input stream 0

  # via redirection, we can change were stream 0 comes.

  # redirect the standard input from the file passed

  exec 0<>

  Count = 0

  while reading lineIn

  {}

  bash # is weird syntax.

  # (()) Is a mathematical expression

  ((count ++))

  echo "${number}: ${lineIn}.

  }

  fact

  # put the input stream to where they were before.

  # Nice, but when the script closes they will all put back to where they were.

  # Of course, I copied this kind of things.  The syntax is not obvious.

  # entry closes.  May not need.  My innovation.  Seems nice.

  exec 0<>

  Restore file descriptor # 0 should be standard in

  exec 0<>

  # close the file descriptor 6 for reuse.

  exec 6<>

  ECHO

  ECHO "the Total of the lines were ${number}.

  TT2

• How to use the time of 80 MHz with the example of the soul base angular Position-buffer-Cont-Ext Clk.vi

  Hello:

  I use the card PCI-6602 and am a bit new to the use of timer/counters.  I use the Commission to measure the position of a quadrature encoder.

  I would use the time base internal 80 Mhz the map of 6602, but examples of LabVIEW will not allow that.  In the example, he States:

  2. call the DAQmx Schedule VI (sample clock) to configure settings of clock synchronization external sample Mode Sample and sample clock Source.  The sample clock Source will determine when a sample will be inserted into the buffer.  The 100 kHz, 20 MHz and 80 MHz time bases can serve as the sample clock Source.  The Edge parameter can be used to determine when a sample is taken.

  Is it possible to use the database internal time for my application?

  I have attached the example vi that I use.

  Thank you.

  Pat

  Hi, Pat.

  

  The rate determines how fast the samples are acquired and put on the material buffer.  This value depends on the basis of time, which is specified by the source of the VI DAQmx calendar entry.  The default source on the PCI-6602 map is the on-board clock (80 MHz).  The rate must be a divisor of the source.  For example, 80 MHz, 40 MHz, 20 MHz, 10 MHz,..., would be acceptable values for the entry rate.

  So the answer to your question would be to remove the entry from the source and ensure that the rate is a factor of the source.  Leaving this entry unwired will use the clock shipped by default of the unit, as shown in the screenshot below:

  

  I hope this helps.

  

• What are the steps needed to get EPICS server to publish the deployment on RT cRIO

  I've been using LV for many years and has everything with a cRIO 9074 RT I am able to generate and execute/deploy the simple screw on the cRIO, but can not get the EPICS server to publish the PVs on the network.  I have spent hours studying examples and whitepapers, but can not find a good example of a server of EPICS on the cRIO deployment.  (I used successfully EPICS on computer based systems)

  Does anyone have an example step by step related to the deployment of the EPICS on a cRIO (real time)?

  It turns out that the PVs were published.  Just know how to pick them.

• How to get the time based on the time zone?

  Hi all

  I try to get timestamp based on the time zone I assign in the computer... for example right now I m CA, if I change the time zone of the computer IS, and use time get Sec.vi, I always get time to CA.

  and not the ACC at EST time... How can I get the time according to the time on my laptop?

  Think I remember vaguely that LV reads this parameter when loading, then try to restart LV after changing the time zone and see if that helps.

• How to view the "timer" current user time

  Hello

  How to display the "timer" right now?

  Currently I have in my program using timer, how to display the current time left on the timer to warn the user the time left on the timer?

  The number of timer upward or the countdown?

  using TimerCB

  a Council does

  Thank you

  Ben

  I'm not aware of the possibility of obtaining the hour up to what a timer callback will be called, then I would say a different approach:

  If, say, you want some action to happen every 10 minutes, but I would like to update the user interface of every second indicating the remaining time I would set the timer to 1 s interval. In the reminder of the timer, I would use a setting that is incremented each time the callback is called; If this value reaches 60 x 10 I reset the parameter and call the function to get the job done. In all other cases, you can simply view 600 - setting (in seconds) than the rest of the time.

  An alternative may be to use two counters, one for the action, called every 10 minutes, and one for the update of the UI, called say every second...

• setting the time & date on the router or Web site atomic time (to synchronize times)

  Is there a program that will perform the same function as this file control breaks:
  NET TIME \\[local pc name or an ip] / set yes

  But instead of the parameter to another pc on your network will put it to your router (Cisco Linksys WRT110 in my case) or an atomic clock Web site?

  I know VB, I can write my a program to do? If so, what would be the code to remove this date & time of my router or a Web site?

  Time Windows synchronizes on a time server NTP [S].

  The sequence of commands that I used in the past (as admin) is:
  NET time /setsntp:192.168.1.1
  w32tm/config /update
  w32tm/Resync /rediscover

  Where "192.168.1.1" is replaced by the time server NTP which synchronize you to.
  Not sure if the Linksys routers include a SNTP server.

  Microsoft replacement instructions are here:

  "How to configure a time server authoritative in Windows XP"
    <>http://support.Microsoft.com/kb/314054 >
  Jump to halfway down to the paragraph "the time service Configuration Windows to use an external time source.

  HTH,
  JW

• Can you assign the time of windows logon minutes rather than hours?

  Can you assign the time of windows logon minutes rather than hours?

  If you are referring to the TIME parameter net user, which is limited to increments of one hour.

  If you want to control (and the ability to force logoff as well), you will need to use a third party software.  Access Boss a 15 minute granularity.  I'm sure like many other applications, probably some of free.

  If you only want to restrict Internet access (rather than access to the computer itself), your router may be able to restrict access with granularity to minutes.  "Parental control" software, such as NetNanny, also restrict Internet access, although that usually not at the minute.