Publish with the installation of the USB SFD 321U/HP floppy drive.

Similar Questions

• e9280t cannot start with the USB 3.0 card (tried several providers) new version of BIOS e9280t necessary

  Hello...

  I bought a new e9280t year last on the HP site complete with 9 GB of memory (now 16), Blu-ray/DVD writer & reader, tuner TV digital Hauppauge, ATI Radeon 4850 video card bi-ecrans, etc... Since then, I've added more memory and a Firewire 400/800 3 card. His running Win 7 Pro (sp1) and the BIOS is v5.29.

  I bought an external drive to USB 3.0 WD (3 TB) and a StarTech USB 3.0 card (Amazon.com). After installing a USB 3.0 card, the system would be powered on for a second then die and then do it again a few seconds later and the cycle continues until the power cord was pulled. Then, I pulled the USB 2.0 card and tried again only to have the same results. The only cards that remained in the system during the trial was the ATI card and the TV Hauppuage card.

  Thinking that the problem was with the USB 3.0 card, I bought another provider (Rocketfish of BestBuy) and installed. The same problem as with the other card USB 3.0, the system does not start.

  No software driver or other changes have been made to the system before installation tent (according to the vendor's installation instructions).

  Given that all failures occur during the power first sequence and cards have been tried with and without power tied to them, that the problem cannot be fixed with an upgrade of the BIOS for the motherboard of TRUCKEE. I could be wrong, but I'm going on 30 years of experience of material as my framework for this review.

  If anyone else has this same problem, it would be good to rally them around and see if HP notice us.

  Thank you

  Norm

  I upgraded my power supply 650w (thermal take) and it all works - USB 3 controller (Koutech Dual Channel SuperSpeed USB 3.0 PCI Express Card (2 x internal) model IO-PEU232) - he also has a SATA power connector, but it works very well with just a power bus.
  -also updates card reader (put it in the 2nd DVD Bay): internal Koutech IO-RCM630 Multi-in-1 USB 3.0 SuperSpeed Front Panel card reader with a USB 3.0 Port (3.5 ")

• Cannot start with the USB on my hp proliant microserver, why?

  Hello!

  I had a few problems to install esxi 5.5 on my hp proliant microserver... USB keyboard, but I solved that by plugging another keyboard, an old labtec keyboard.

  Seems esxi is not compatible with logitech g510... BUT I have another problem. My server does not start with my installation of esxi usb key longer. It was also like that before I changed the keyboard, so this isn't the issue. Server starts fine and then I get the message: "'remove the disc or the media, press any key to restart" "

  It worked fine a few days ago. The usb boot works OK on my Hp workstation...

  I have a windows server 2008R2, installed on the server, but the usb boot worked fine when this OS is installed... So nothing has really changed, he just stopped wanted for a startup with USB... I loaded the default bios setting... IM lost here please help!

  IV ' e OK installed esxi 5.5 via USB stick

  Follow this link to get the usb boot: http://www.tinkertry.com/rufus-takes-2-minutes-to-create-a-bootable-usb-flash-drive-for-esxi-installation/

  Don't know yet why this work, but I'll know!

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• BI Publisher with the delivery Manager

  Hello
  Where I can download the latest version:
  BI Publisher with the delivery Manager to generate reports with Oracle Identity Manager
  
  Thanks for the support

  Here is the link:

  http://www.Oracle.com/technetwork/middleware/bi-Publisher/downloads/index.html

• Is - this Windows 2003 64-bit supports the USB WD My Passport HIS drive?

  I bought a WD 2 TB my drive USB of HIS passport and tried to connect to a windows 2003 64-bit server, but the drive does not appear in the list of local drive. I checked in the computer management > Device Manager > ComputerName > discs and found that there is a driver for device usb WD My Passport 0748.

  I conect the usb WD drive in my windows XP machine and copy the driver ITS \\Extras\WD device driver folder and transferred to local drive of the windows 2003 server and I tried to update the driver but the driver update failed and telling me that there are no compatible driver in the source folder.

  Here are the contents of the folder:

  wdcsam - security catalog

  wdcsam - information for installation

  wdcsam - file system

  wdcsam64 - file system

  I tried to search the site Web of WD for the compatible driver 64 bits, but, according to the Internet, the USB doesn't have a driver for windows because its use of the microsoft driver. Below are the links related to the topic of Microsoft and WD which, in my case, does not contribute to the problem.

  http://wdc.custhelp.com/app/answers/detail/search/1/A_ID/5419

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-book-WD-SES-device-USB-doesn ' t-have-a-driver/d5a255c7-545c-45f4-9e15-8528384daa80

  Is there someone out there have solution for this?

  Thank you

  Hayet

  Hello

  After finding the solution I posted it on this site.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/61950e4d-4C45-4108-8535-4b364f3d6056

  Thank you

  Hayet

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Publish with the installation of Windows updates.

  do a clean reinstall of windows xp. Im running a Dell Dimension 2400 with a Celeron CPU 2 .4GHz and 1.99 GB of ram that I loaded sp3 and net framework 3.5, I could update twice that the update said I had about 130 updates but it installed only about 100 and was stranded on the rest, I tried every fix I could find and nothing worked Im adding a fix auto repoet...

  Details of the update of Windows editor

  Problems found
  Registration for the service is missing or corruptService registration is missing or damaged do not fixed
  Sign up for the service Reset Succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Check verrouillesfichiers missing or damaged missing or corrupt files fixed
  Missing or corrupted files repair not run
   
  Windows Update, error 0x800B0100 (2013-12-03-T-01_59_03P) 0x800B0100(2013-12-03-T-01_59_03P) of fixed Windows Update error
  Reset Windows Update of the data store Succeeded
   
  Encryption services components are not the registeredCryptographic service components are not registered fixed
  Save the components of CSP Succeeded
   
  Verified issues
  Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
  Some security settings are missing or have been changedSome security settings are missing or changed Checked
  Key of registry corrupt Patch registry Patch keysCorrupt
  Detects the hotfix or corrupt cache Checked
  Windows Update services aren't runningWindows update services do not run checked

  Problems found details

  6 registration for the Service is missing or damaged do not fixed
   
  Sign up for the service Reset Succeeded
   
   
  6 problems to install recent updates not fixed
   
  Fix Windows Update succeeded
   
   
  6 problems to install recent updates not fixed
   
  Fix Windows Update succeeded
   
   
  6 control missing or corrupt files fixed
   
  Missing or corrupted files repair not run
   
   
  6 Windows Update error 0x800B0100(2013-12-03-T-01_59_03P) fixed
   
  Reset Windows Update of the data store Succeeded
   
   
  6 encryption services components are not registered fixed
   
  Save the components of CSP Succeeded

  Issues checked the details of the detection

  6 environment variables Windows Update are incorrect Checked
   
  Restore the Windows Update environment variables is not running
   
   
  6 some security settings are missing or changed Checked
   
  Reset the security settings is not running
   
   
  6 keys to corrupt the registry Patch checked
   
  Detects the cache fix corrupted or missing
  Fix registry patch not working
   
  Fix registry patch problems
   
  6 Windows Update services do not run checked
   
  Required for Windows Update registry files works not

  Details of detection

  The service status

  --------------------------------------------------------------------------------
  $PropName: $Value
  $PropName: $Value

  Collection information
  Computer name: NUM1UAFAN
  Windows Version: 5.1
  Architecture: x 86
  Time: 13:58:07 03/12/2013

  Publisher details

  Windows Update
  Find and fix problems with Windows Update
  Package Version: 8.1.2.20131119
  Publisher: Microsoft Corporation

  Follow the procedure in Xircal here to the letter

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-Updates-site-hangs/c83bb8d9-7e3f-40E0-b985-4d0ada0b54e5

  Although addendum notes below that it connects to an update of specific cumulative security for which there is a new version from his original position.

  I spent more than a day of reloading of a system by various methods every time with the same results as you find you, even the same error code.

  You can find the BITS service, replaced by another with a name of garbage, just follow his process as it repairs. I don't have the last registry fix.

• UAC - alert "Unknown Publisher" with the programs Microsoft and system settings after FixIt 50202

  I had some problems with the list of Windows Update or vacuum . Since a simple reboot did not help in my case, I searched and found FixIt 50202 - "How to reset the Windows Update components?"

  I have run the fix as soon as some time ago and it solved the problem. However, the problem came back after a month or two, I decided to run again, this time in (OH!) in aggressive mode.

  The problem has been resolved again, but after restart of UAC began to invite for each single action that requires elevation, even those who should fall under the "changes that I do" class. Officially my UAC settings have not changed, and I tried moving them around, restart and so on.

  What I get for each single program or setting requiring an elevation is the UAC dialog box asking "do you want to allow the following program from a Unknown Publisher to make changes to this computer?

  An example?  The services, i.e. services.msc, no dialog as

  Program name: mmc.exe

  Publisher: unknown

  Original file: hard drive on this computer

  UAC or my system, lost the ability to recognize the signature of Microsoft? Any tweak registry to fix this?

  Oh, I have no restore point before the FixIt...

  I think I solved the problem :-)

  Among the measures taken by FixIt 50202 there

  • Rename the following files to *. BAK: [...] %systemroot%\system32\catroot2

  For what I understand, this folder contains the catalogues of security installed on the system, including the signatures of files and com objects and certification info. Rename/delete then was not a choice safe and left me without signatures during most of the windows exectuables.

  I tried these files on the Windows 7 DVD, and I could not find them. However, using 7zip I could browse through the archives install.wim on the dvd and extract the contents of the catroot2 directory. Copy this file to the cd did the trick:

  C:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  The file has been locked by encryption Services, so I had to stop the service, replace the file and restart the service.

  I have still some files that appear as "Unsigned" using sigcheck *, which I suppose were not part of the initial installation. I hope that the problem will be resolved with future updates, but now think are working normally again.

  [*] before, almost all the files in my System32 directory were "Unsigned"!

  [edit] everything is now done: I copied a few .cat files Windows\WinSxS backup in the catroot\ {f....} directory, and who sets the signing of files last few!

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.