Put a new hard drive into the computer, Windows 7 family premium says "Invalid product key" help?

Similar Questions

• I get a recurring answer ' * stop: 0x0000007B (0xF7BFE524, Ox0000034, Ox00000000, 0x00000000) "after the installation of the new hard drive into the computer laptop viao.

  Tried to boot from a hard disk with a blue error screen. Replace the SATA drive with 500 GB drive. Then drive formatted and installed Windows XP Pro and McAfee 2011 office. Same error!

  Hello

  I suggest you to visit these links and check if it helps:

  http://support.Microsoft.com/kb/324103

  http://support.Microsoft.com/KB/314082

  It will be useful.

• Add the new hard drive into the data store in ESXi 4.1

  Hi all

  I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.

  I added a new 500 GB scsi hard drive to the server,

  and I need to add it to the datasore or create a new...

  How can I see this new hard drive? and add it to the data store?

  Waiting for your help.

  concerning

  Abrams

  Oracle system engineer

  Abrams,

  That's all I can help you.  These instructions are based on the Perc 5 / i controller, which I think you have on our system.  You have not specified the server so I just assumed that this is so.

  1. unscrew the hot spare that you just made.  Follow this link from Dell.
  http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1061343

  2 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357

  This link has three steps to void, skip the step on "spare parts of designate hot."
  a. create the virtual disks and select virtual disk options.   -Online steps to create another disk group and add the new disk to the disk group.
  (b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
  c. initialize virtual disks. -online must do.  just do not initialize the incorrect disk.

  After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).

  And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.

  Good luck.

• Install the new hard drive into the Pavilion DV2660se - full-size unrecognized

  I have a Pavilion DV2660se and recently began to receive messages from failure on my hard drive.  I was able to order a replacement - it is the same model # former disc, same size, etc..  I installed the drive, then started the system with the recovery discs.  It has been chugging along now for about 3 hours. While the process was ongoing, I was able to look at the drive and to see that it is only accepted with 24 GB instead of the 250 GB is it really.

  Any suggestions on what I can do to install this player and have all recognized?  Thanks for the tips!

  Well, I'm back, don't ask me how, I can at least with all rebuild...

• New hard drive LG Canada E300 Windows Vista Home Premium Laptop

  I change my old HDD SSD hard drive. OEM is more portable computer sales and support for laptop.  There is a recovery on the old HARD drive partition, but I don't know if I can use the recovery on the new SSD partition. How can I install Vista with existing license key?

  Hello

  As you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system on the new HD.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Reinstalled Windows 7 after drive crash hard, now impossible to activate Windows 7 anytime upgrade, Pro invalid product key

  SEVERAL MONTHS AGO, I UPGRADED MY WINDOWS 7 HOME PREMIUM TO WINDOWS7 PRO.  RECENTLY, I HAD A HARD DRIVE CRASH AND HAD TO REPLACE MY HARD DRIVE.  I REINSTALLED MY ORIGINAL SOFTWARE, BUT WHEN I TRIED TO SWITCH TO WINDOWS7 PRO - I GET AN INVALID KEY ERROR.  HOW CAN I GET THAT KEY REACTIVE THANKS

  * original title - UPGRADE TO WINDOWS7 PRO VIA - HARD DISK CRASHED - REINSTALLED ORIGINAL WINDOWS7HOMEPREM TRIED TO upgrade to NEW WINDOWS7PRO STILL SAYS IS INVALID KEY - how DO I REACTIVATE THIS KEY *.

  Try this:

  How to activate Windows 7 manually
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  5) stay on the phone and wait for a person to help you with the activation.

  I am not sure if this will work for people upgrade at any time, but it is worth it.

• I have Adobe Photodeluxe home edition 4.0 on my new hard drive of the computer and that you can not register to this

  I have Adobe Photodeluxe Home Edition 4.0 and cannot be saved

  Hi Kevin

  Adobe Photodeluxe Home Edition 4.0 is a Product.The obsolete last time we have updated 15 years ago.

  The operating system you have. I don't know whether or not it is running on your computer. As it is supported on Windows XP/95 / 98 / NT

  Concerning

  Assani

• My MacBook Pro was built in mid-2009, I understand that I won't be able to get the next Sierra of OS.  I just put a new hard drive 700 GB, more I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars. What I need to by

  My MacBook Pro was built in mid-2009, a 2.6 GHz, 13-inch, I just put a new hard drive 700 GB and I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars.

  I understand that I won't be able to get the next Sierra of OS. I need to by a new Mac?

  Talk to the people the more I would get if I turn in I'd get is about are about $ 100 million.  Please tell me it isn't so.

  If you want Siera you will need a new Mac, but you can continue to use the old one as long as you want.

• new hard drive with the new computer

  I'm going on a trip and bought a macbook air which I think I installed LR on.  Now, I want to bring a new hard drive on the trip and I would like to first of all a new catalog on a new hard drive.  How to create a new catalog on a mac formatted hard drive?

  Connect your new drive hard (if external) for the Macbook Air

  Launch Lightroom and go to the menu bar and choose:

  File > new catalog

  Navigate to the new hard drive and choose a new catalog name for example MyCatalog2 or what you prefer.

  Then click 'create '.

  When the empty catalog launches, you are ready to import pictures.

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• new hard drive for laptop computer tried to install windows XP

  Just fitted new hard drive for laptop computer tried to install windows XP, continues by saying can not find any hard disk. any help would be appreciated

  Hi JohnJelf,

  ·         What is the brand and model of the laptop?

  ·         What is the full error message?

  ·         The new hard drive detected in BIOS?

  I suggest you to contact the manufacturer of the laptop computer for more help and information.

• I put a new hard drive in my laptop and when I installed Windows Vista I get this message: "windows cannot configure windows to run on this hardware of computers."

  I put a new hard drive in my laptop and when I install Vista I get this message: "windows cannot configure windows to run on this hardware of computers."  I can't install an oem on a new hard drive version?  This is the portable original in all other respects.

  original title: new hard drive and vista

  Hello

  strange that you can request that

  HP computers have been known to not let you install Vista on a non HP bought replacement hard drive

  There were a few posters with this problem here

  If the OEM disc for this particular laptop, you should be able to reinstall it as many times as you want as long as you have not changed the main material (the motherboard)

  You can change the hard drives, RAM, etc.

  I presume that you boot from the Vista DVD

• Install windows 7 on the new hard drive getting the error cannot continiue

  I bought a new drive hard seagate from my existing was only 250 gig, so this is a new clean install, I installed the drive hard drive start the computer with the dick of installed Starter, he began to load then I get this error message saying;
  "Update failed due to a stop press unexpected ok to restart the computer." Installation will continue after the computer restarts. »
  However, when you press ok, the machine starts, but continues to display this error message and so am now stuck in a loop. What can I do to stop this, because I am totally confused. I have a second hard drive in the machine, but when it is started, he found the new HDD 1000 GB.

  I am running Windows 7 (64 bit),

  Processor AMD Phenom 11 X 4 3.4 ghz AM3 Quad

  MSI 790XT-G45 AM3 / AM2 + / AM2 AMD 790 X ATX card mother AMD

  Any help would be appreciated

  First chech that the BIOS is configured to use the CD/DVD drive as frist boot device.

  Then remove the old drive and only connect the new drive.

  Start the PC and insert the CD that you created and boot from the CD.  If there is a "Long full" test, which is that you need to perform. Also check the SMART data (look for bad sectors).

  J W Stuart: http://www.pagestart.com

• Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

  Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

  Thanks in advance for your help.

  D.

  Hello:

  The only manual that I could find is one that covers the ze5600.

  See if it will work for your model too.

  http://h10032.www1.HP.com/CTG/manual/c00246219.PDF