Put counties reset when a battery is changed?

I have a late 2008 Macbook.  The battery has been replaced once.  The current cycle number is 814.  The recommended number is 300.  The number of cycle reset when the battery has been replaced a few years ago, or is this cumulative?  I don't remember the county when it was replaced, but it was more than 300.  And a new battery is still available?

If you install a new battery, the number of cycle will start from the beginning.  It is not cumulative.

If you battery has 814 cycles on it, I invite you to replace it.  If it starts to develop, it can severely damage your Macbook.

I can recommend Nupower OWC or batteries Anker.  Avoid bargains on ebay and Amazon.  There are too many issues that will cost you more in the long term.

Ciao.

Tags: Notebooks

Similar Questions

  • Re: Satellite U300 hibernates when the battery is very low

    Hello

    I bought my satellite U300 141 two weeks ago.
    The computer is not put into hibernation when the battery is very low.

    I checked the settings of vista, default 2% of the battery capacity, the laptop must Hibernate. But mine is not.
    But I noticed that the battery level does not fall below 5%. I tried to change the setting of vista from 2% to 5%, but it has no effect.

    Telephone toshiba support told me to update the package of the value 'stretched out' or something like that, but it has no impact too.
    the problem is still there.

    Anyone have an answer?
    I also tried to update the BIOS, but during the upgrade process, the software told me that I can't because I'm not the administrator of the computer, I am sure I am.

    so, if someone can help me please...

    Please check first if hibernation was enabled in Vista power options.
    Then you can assign to hibernation level up to 10%

    Maybe then your laptop will be able to enter hibernation mode

  • When I try to change the settings for keyword.url in topic: config to make one "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

    I just installed Firefox 4 today. When I try to change the settings for keyword.url in topic: config to make one "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

    • Makes no changes on the start safe mode window.

    See:

    See also:

  • I have to reset the charge cycle counter after replacing the battery?

    I had a defective power adapter, running on the number of cycles of load on my battery.  Thus, it no longer accepts a charge.  I have been running only on AC for over a year now, but finally decided to replace the battery.  What are the steps to reset the counter after replacing the battery?

    Replce just the battery, the battery will communicate the number of cycles to the computer. No adjustment is necessary.

  • My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

    Original title: security settings

    My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

    How can I solve this problem

    Hello


    1. what operating system is installed on the computer?
    2. were there any changes (hardware or software) to the computer before the show?
    3. What is the full error you get, when you try to activate windows Defender?
    4. what anti-virus is installed on the computer?

    Method 1: Check if the Windows Defender service is enabled.
    a: Type Services.msc in the start search box and click on enter.
    b : now, look for a service called Windows Defender, double-click to open it.
    c: Now Start the service and make sure that it is set to automatic.

    Method 2: Temporarily disable the antivirus and check if the problem occurs.
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Activate the anti-virus program after you perform this step, because it would protect your computer from threats.
    Note: If there is an antivirus installed, then it might be turn off Windows Defender, so temporarily disable the antivirus and check if the problem occurs.

    Hope this information helps.
  • DV7-6199us is not put into hibernation when battery low - just died

    Some time in the last month or two, my laptop properly leave off when the battery is low.  It's supposed to the hibernation when the battery reaches 10%:

    It used to work properly, but now he dies suddenly (off, lose all my work) when the battery is at a level critical.  I don't know what level because he always catches me by surprise.

    I tried to change the critical levels to see if I could do to begin to pay attention, but that did not help.

    How can I get to Hibernate properly?

    Gary

    Hi garyfritz,

    At this point, we have done everything, but replace the battery. Noted that energy seems good but it is two years and the laptop will usually survive battery. Maybe it's time to get a new battery or leave it at the levels you set now.

    Thank you

  • change the text but keep put in shape when using actions.

    I want to put a text that changes its value at different intervals in my project.

    To do this, I have inserted for each trigger and triggers, I inserted an action such as: sym. $("objet 1").html("2");

    Although the text changes its value, the formatting isn't.

    I would like to keep it white 30px Arial, but when the value is changed as a result of the action, it reverts to a few small black arial text size.

    Any ideas on how to keep the formatting of the text?

    Hi Nathan,

    Use the text tool, I manage to reproduce your problem. Here is my demo file: classFontsTriggers.zip - Box

    Add text to a rectangle or some other form?

  • Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

    Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

    This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

    Help!

    The laptop is a year old.

    I already ran the diagonsitic battery and it said the battery was good.

    OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

    Here are the parameters:

    reserve battery level (this is when the popup will appear).

    10%

    low battery (this is when the low battery action will be performed).

    8%

    critical battery level (my computer would die at this point.)

    7%

    low battery action: sleep, sleep (this customize to your liking).

    battery low notification: on (hold on).

    critical battery action: sleep, sleep (my computer died already in criticism.)

  • BlackBerry BB Z10 Z10 stops when the battery indicator shows about 35%

    Z10 BB stops when the battery indicator shows about 35 percent without any warning. Does not illuminate until the charger is plugged. Immediately shows charge remaining 40% +.

    Please advice.

    Stephen

    Hello

    Here is a solution I tried after lookng through various forums and type of works for me. A common thing in most of the solutions is to take the battery and sim card out, leave like this for 1-2 hours and put them, I found back in and turn it on. I'm not sure of the logic behind it, but I remember reading that this overshadow the phone battery problems (connected incorrectly - essentially a reset) and begins to charge.

    I tried it 2 days back and I see that it worked for me, at least until now. I cross my fingers.

    I hope it's useful, works at least for few of you.

    Thank you all for the suggestions.

  • I can't change the video resolution on youtube. When I try to change it, he goes to 240 p and the screen is black and does not play the vid.

    Hello, I have this problem.
    Recently, I have noticed that when I try to change the quality of the video by default 360 p to whatever, the quality will increase to 240 p and the video wont run. There will be a black screen.
    I tried to reset the browser and it has not fixed my problem.
    I tried the same video in internet explore and quality change worked normally.

    How would I fix this?

    Thank you

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".
  • How to control automatic shutdown when the battery is discharged using Windows

    The laptop stops right in the Middle something without notice.

    Even after that I formatted the system, he still stops automatically when the battery is low, without advising me of either the low battery status or the judgment.

    I don't think that the cause of the problem is the power management because it is set to balanced.

    How can I control when the pc stops?

    Hello

    Usually, you can change these settings within the Windows power management.
    Using Win 7 or Win 8/8.1?

    Here is the Nice technical document about the features of Windows 7 power management
    http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

    Check the last option called: battery.
    It provides many useful features such as low battery, critical battery level, low battery action or critical battery action

  • L50 - B satellite will not start when the battery is completely discharged

    Hello

    My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
    I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

    The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

    My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

    Thanks for responding... I hope well :-)

    Toshiba L50 - B
    Windows 8.1
    Any standard/original setting since I only acquired this laptop a month ago.

    The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

    Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
    Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

    So in the worst case, the laptop must be checked by authorized service provider.

  • Satellite C660 - WLan disconnects when on battery

    Hello

    Please forgive my ignorance on this, but I'm just trying to establish whether the problem is with the laptop.
    I recently bought by Satellite C660. I loaded the internet as I have done with so many other pc, and if the charger is connected (even if does not load) I can connect to the internet and keep in touch without any problem.

    As soon as I remove the CAP, because obviously, I don't want to keep plugged in when the battery is full - I lose the internet connection - comes with limited access and that's it, impossible to surf.
    It can be something completely stupid that I have or have not is but I really would like help any with this question that it's starting to stress out me.

    I also tried other internet devices that seem perfectly ok and my signal is excellent.

    Please help, thanks in advance

    Hi mate

    Please take a look here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

    You can solve this change of economy option WLan Card in Win 7 the power supply management.

  • My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever.

    My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever. Any ideas what's happening?

    Make sure you change the image is not checked...

  • Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

    Hello

    Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

    I have a Toshiba Satellite Pro L670.

    Even when the sound in Windows is turned off the laptop do a annoying sound.

    Thank you!

    Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

    Do you really want to work until the battery is completely discharged?

    Anyway, AFAIK this notification level BIOS cannot be disabled.
    Let's see if someone else is better informed than me.

Maybe you are looking for