put my laptop on my T. V. P.C.

Similar Questions

• Firefox crashes when I put my laptop on stand-by

  Hi everyone: I'm all leveled for windows 10 so I don't know if this problem is Microsoft or Firefox. Firefox did just update me you. So I decided to start here. All of you who every time that I put my laptop to sleep. Firefox crashes when I reopen it Firefox. It will restore my tabs. It's always annoying. you go this process every time I take my laptop out of position by I refresh Firefox already. To the point to put my computer on standby Firefox works fine. This has happened several times now. I'm running out of ideas, any help would be appreciated. Jenny

  Yep, those are reports of error ID's, but they are a bit bland - 38.0.5 for that charge very quickly.

  Use help > about Firefox to trigger an update of Firefox 40.0 which has lots of Windows fixes 10 of compatibility on the previous version.

• My basic desktop on vista turned at 45 degrees so ive got put my laptop as a book to read and my mouse seems to go backwards

  My office on my vista basic screen turned at 45 degrees so ive got put my laptop to read and the mouse pad seems to be going backward. can help u to make it back to normal

  Hi Billydryden,

  1. What is the serial number and model of your graphics card?

  This can happen due to changes in the settings of the graphics card. You can try the following steps and check.

  a. Click Start, go to control panel and select the graphics card utility.

  or right-click on Deskotp and select chart properties.

  b. in display settings to make changes in the Rotation option that you want and check.

  Hope this information is useful.

• I would like to put my laptop on the side screen

  I would like to put my laptop on the side screen.

  I tried

  CTRL + Alt + arrows and on the right, click on graphical desktop Option Rotation without success.

  All ideas

  On Tuesday, February 22, 2011 22:49:54 + 0000, market Burwell wrote:

  I would like to put my laptop on the side screen.

  I tried

  CTRL + Alt + arrows and on the right, click on graphical desktop Option Rotation without success.

  This possibility exists on some screens and some laptops, but not all. I have
  is unclear, given that you don't tell us what laptop you have, but it
  may not exist on your.

  Ken Blake (MS-MVP)

• Please help! After a windows update last night, I put my laptop on and it won't let me type anything in browsers or anything else.instead a question mark appears when you type!

  need help please, after a windows update last night, I put my laptop this morning and it won't let me type anything to, type all.cant in my browser, research or of anything.when I try to type a? will appear instead and if I press any key again and a new tab opens again and again, if you continue to press any keys.i tried the system restore and it does not work.when I tried troubleshooting my devices on my laptop there is an error code 43. I uninstalled the usb controller option he gave and restarted the computer. I can see is no longer this error.i hope he relocated the itself.anti virus is very good if can anyone help?

  laptop = hp pavillion (BEATS AUDIO)
  OP = WINDOWS 7

  Hi Dan MJ.

  Yes, you can go ahead and try the steps in my previous post and check if this solves the problem.

  If these steps is not enough you can follow these methods and check if it works:

  Method 1: I you recommend to turn off the computer, unplug the power, restart the computer and reconnect the USB device. See if the device is detected.

  Method 2: You can run the hardware and devices Troubleshooter and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also see the following article for more information about the error Code 43:

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873%28WS.10%29.aspx

  Let us know if that helps.

• Can I put dv7 laptop computers for the backlit keyboard? 6143CL & 4183 CL

  I have two laptop dv7 which are 2-3 years. (Bought at COSTCO - models see below.) Question: Can I put these units for the backlit keyboard? Thank you, Ed.

  My Info:

  laptop dv7 6143CL

  Windows 7

  Product name: HP Pavilion dv7 Notebook PC

  laptop dv7 4183CL

  Windows 7

  Product name: HP Pavilion dv7 Notebook PC

  Hello ElyMayor,

• "Do not put the laptop near devices such as TV speakers/fridge that generates a strong magnetic field" what is the effect of this?

  Original title: do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

  Do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

  Hi stuckfree,

  Magnets are used in computers for various purposes, for example in the hard drives. Several parts of a laptop computer may be affected by a magnet. More commonly known as material element affected by magnets is the hard drive.

  That is not exactly true. Hard drives are well protected against most of magnetism, and most even use a magnet to turn, but many strong magnets and electromagnets can and will damage a hard drive. More likely to be affected is the BIOS of your computer (Input\Output base system) ROM, which shows how to use the basic components and boot into the operating system to your motherboard.

  So it's best to avoid placing computers\laptops close to all these devices.

• Impossible to put my laptop as wifi hotspot network

  Hello refugees,

  My laptop: HP G62 Notebook PC (purchased at Oman on 2010/10/10)

  Product number: WZ663EA #ABV

  OS: Windows 7 Home Basic - 64 bit

  Network card: Broadcom 4313 802.11 & Realtek PCIe FE Family Controller & Microsoft Virtual wifi Miniport adapt & Bluetooth (two) device

  The above details are on my laptop. My problem is unable to make my internet connection by cable to connect to a wifi hotspot to use in my SAMSUNG SIII mini. I show some videos to do this and I did the same, but I couldn't get the range in my laptop.

  the steps I did: opened my control panel network and selected the "connect to the Local network' and 'Wireless network connection' and do a right-click of the mouse and select"bridge connection. He came. Then I do a new «hoc Network» wireless connection then I gave it name as 'abs' of the network, and then select "Security Type" as "no authentication" then cliked ok. Now the netwok place showing my wireless "abs". and give courses as "pending for users. then I turn on my wifi in my laptop, but this 'abs' wireless appears. even, I'm trying to enter manually the address, then it also show that "abs" is "not in the range.

  My mobile wifi does not work normally. I try a few other networks, show and me can connect. same way my laptop computer wifi also works normally. I try to share my mobile net as wifi hotspot, its showing my laptop and connect it correctly. My only problem is that I am unable to share only the network from my laptop.

  Note: I read your few article which is about the same subject, he u mentioned that uninstall broadcom 802.11 it will install automatically after re-boot. I did the same rightnow. which is also automatically installed. After that I try but even failure.

  I opened my HP Recovery Manager and reinstalled wireless network told all. but still nothing.

  
  Here, I have attached my Place of network connection.

  This after I created the trigger guard.

  This time I have created the new network of the House of Commons as I said above "abs". but it does not appear in my laptop.

  As another step, I did as I show on the videos. 1 make my network to share the properties option and giving manual IP address in a wireless network to "Version of the Internet (TCP/IPv 4 4) Protocol. Then the same steps for 'abs', but same result failure.

  I know this great article to read, but I thought to explain briefly and I hope I did. So please friends help me through this.

  I'm sorry that you run in this parameter issue to the top of your hotspot. You said watching videos on how to set up the point on your phone (this one is for someone else who come to this thread). So now your screen attach / Portable Hotspot on your phone should look like this

  

  If it's not settings > additional settings > Tethering & Portable Hotspot > Swipe to turn it on

  Once you have Setup hotspot on your phone, you should not have to take special measures in the network and sharing Center. You have no need to configure any adhocs or something like that. You should be able to see your access point listed in the available networks list, just like you see your home listed wireless network. Then you click to select it and click the Connect button (see photo below).

  

• I put my laptop into hibernation and don't know how to cancel.

  How to get out of hibernation

  Press the power button. Read the manual that came with your mobile PC or go to tech support website of the computer laptop mftr. read the manual if you don't have a paper copy. MS - MVP - Elephant Boy computers - don't panic!

• I had to put my laptop to the original on the parameters of the box and now I can not get all updates for windows vista home preimum

  I have reset my Toshiba laptop for the orginial on the parameters of the box using my recovery disk that came with the laptop when I bought it years ago. Now reinstall and update of windows, I can not service pack 1. He said that the system may reboot several times, blah blah blah, it is said installed. I just want this computer up-to-date with all the updates. Its use will be mainly internet, e-mails and word documents. Help, please

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• I put my laptop computer gateway Hibernate about 1 hour ago. Now I can't get the rest up. What should I do? I tried turning, then on it. It starts, and then it goes back to LEEP.

  It is a computer laptop gateway with turion x 2

  Try a system restore to a point BEFORE this problem started to occur.  Here's how: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Check the box to show more than 5 days of restore points.  If this does not work, try an earlier point or two.

  If this does not work, do a startup repair, boot from the Installation of Windows Vista genuine disc or your recovery disk. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do the CD drive first in the boot sequence.  It was boot the PC and wait for the screen where it shows the F key to enter the menu start or start of installation.  Push it quickly. Make the change, save your work and exit.  Insert the CD into the drive and restart.  When you are prompted, press a key to start the PC.

  If you don't have a floppy, you can make a recovery disk to http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ using a burning like software: http://www.snapfiles.com/get/active-isoburner.html and of course a blank CD.  This recovery file is just as good as one that comes with Vista, but it can't do a reinstall.  You can do a system restore or startup repair or even use the command prompt.  Boot from the CD may be your only option to keep the PC "awake" long enough to make the procedures - which even works.

  If that is not working, after return and we work on other solutions to the problem - we have still quite a few options, we can try - but I think that the first option (System Restore) is likely to work best if you know ehen this started and can find a restore prior to that point.

  Good luck and I hope this helps - but please post back whatever the case.  We are here to help you best we can.

  BTWk here are a few articles about hibernation you might find interesting: http://www.vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html, http://www.howtogeek.com/howto/windows-vista/re-enable-hibernate-option-in-windows-vista/. Lorien - a - MCSE/MCSA/network + / A +.

• How to put my laptop hard drive to 00's (vista) ahd and reload the disc that came with it when buying

  slow race have had this laptop for 6 years

  You boot from the recovery disk provided origonally and follow the instructions. You will lose everything on the PC

  Your laptop site should have instructions, if you are not sure - you are looking for "restore to factory specifications.

• my normal viewing screen, I have to put the laptop on the side to see it in a vertical position. His side!

  I hit a few keys accidentally when this happened, even when I turn off the laptop and restart the display is on the side. How can help I fix it permanately? When I press the F1 key and select extend it turns its back to normal, but on reboot it goes next.

  I went live help I was so anxious to quickly solve the problem. They connected to my laptop and find the problem and correct it. I don't remember really exactly what he was doing, but I know that you know what you're talking about because it had to do with 90 degrees for display settings. I just wanted you to know. Thank you, Liz Elizabeth

• I put my laptop to level and I would like to reinstall my CS6 PS on my new system. Licensing issues? 'Traps' or advice, that I should be aware of?

  My current system is having a hard time to follow and it's time for an upgrade. I have a license for Adobe Design Standard CS6 and would obviously like to ensure that my license is valid after the upgrade.

  

  How can I go on the migration from one system to another? Are there of "traps" I should be aware of?

  is there a publication "how to" document on how to do this?

  Thanks in advance.
  Rgds,

  Maurice

  No use of account something designed to make the upgrade without pain by copying the software everywhere... will leave you with something more or less broken. Reinstall and configure properly takes time, but are necessary.

  The basic 'how' is ' imagine that you bought just for the first time. After that it works, turn off on the old system to avoid future pain.

  I do not know if someone has views on the appropriateness of using migration for other purposes. I tend to say, just reinstall, copy data, again put in place.

• Photoshop CS5 on computer dead now on the new desktop PC I put on laptop too?

  I bought Photoshop CS5 last year a few months before my computer 'death inevitably' on me. The store of the local computer could not solve it so I bought a new PC desktop to them. Under the agreement, they have installed all my programs from my records and I used it successfully since.

  I now have new laptop that I want to use a holiday of photography. I can load CS5 on that too? I understand there are 2 licenses but one can always allocated to the PC "dead." How do I know if this is the case and get it transferred to my new laptop?

  Just try to install CS5 on the new laptop computer.

  If you get a message about exceeded activations then contact Adobe, explain the situation and get the County of activation reset.

• Firefox bars menus, background, and text all change them to black when I put my laptop on the sector.

  My Firefox is quite good on battery. However, the minute I plug my diet, all turns off short name of the Mozilla Firefox window. The text is still there because I can select.

  This change involves the switch graph display card?

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers