put on without password?

Similar Questions

• Someone has put a master password in my Firefox without my permission, how to erase it if I don't know what it is?

  A few days back somebody, more than probably one of my children put a master password in my Firefox browser. Now I can not connect in my crosshairs pay Bill or anything else, as he continues to ask me a master password that nobody seems to know what is. Is there a way to clean that? If so, how? I rather not completely it blow and start over.

  Thanks for your attempts to help, but I could finally understand what the kids had done. He ended up not being that they have changed or entered one. The problem stems from the bar one of them was installed, after I deleted it I managed to enter a master password and recover all without losing all my passwords saved a tool. I learned something from that however, I now have a copy of my signons3.txt file saved someplace safe, so if something happens in the future I have a copy backup.

• [INS-06006] Connectivity SSH without password do not put in place between the following nodes.

  Hello

  I'm currently building the cluster by RAC 11 GR 2. I try to install Oracle Grid Infrastructure Oracle Linux 6.4 (x86_64bit) machine - node1.abc.com.

  I'm at the stage of the "Cluster Node Information" where I have to provide me with the list of nodes to be managed by the Oracle grid Infrastructure. Currently I have added just me - node1.abc.com with the name of the virtual IP address - node1 - vip.abc.com. The two host name and virtual IP addresses are registered on the DNS server - it is also installed on node 1. Before adding the second node2.abc.com, I was testing SSH connection but it fails. I clicked the [SSH_Connectivity...] button and in the OS Username (grid) and his password. When I press the [Setup] button, it pops up message successful "Able to establish connectivity SSH without password between selected nodes." But when I click on the [Test] button or the [next] button, I get error - ' connectivity [INS-06006] SSH without password, do not put in place between the following nodes: [node 1].» What is the problem and what exactly to do to avoid this error?

  
  

  Thank you
  

  It was because I assigned a real static IP address for the second NIC eth1. With this affected YES wouldn't let you go to the next screen. So I had to remove NIC out of my laptop. But if eth1 is not resolved by the DNS name it also gives you errors. So I guess a correct functioning is I would sign up eth0 and eth1 to the DNS server but eth1 does not have real IP. Then I could go to the next screen.

• With or without password for remote desktop connection

  Hi all ^_^

  I've got a trick (win 7) & PC (win el maestro)
  I am the only 1 using the tower and the PC for all, after that I created a password for the PC, I tried to log in it in the round using desktop connection remote and it worked, but now I connect the lab PC's get connected f and when I write the password in the computer to connect to the connection in the laboratory is an error or something like that!
  but now I removed the password until I have find a way to connect without having this problem
  can you help me with this?
  I read things on empty passwords and security policy and other things, it's about connecting a computer without password
  can you help me with this?
  I need the boring explanation if you can
  Thank you

  Hello

  You can do this, but I do NOT recommend it because in this case if someone has your IP address then could access your windows by using remote desktop. And people could use find find IP of random generator and when there is NO password can access. so please use password and the password to connect.

  However, you can configure the setting to connect with empty password:

  1) go to control panel

  2 Administrative Tools)

  look 3) to the local security policy

  (4) open and look for security options

  (5) then in account you will see something like "limit local account use of the empty password for console logon only

  (6) try to disable it and reboot your PC

  It should work, but as I said, it could put your PC in DANGER.

  By design remote desktop requires a password to connect safety precaution. The Remote Desktop user ID and password are the on the computer you want to access and control remote. The user ID must be an administrator or be a member of the remote desktop users group.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 287 & Thierry = 25AB668DA65C8FBE! 118

  If you need create a password for the user ID you want to connect with the help of office remotely.

  Computer on which is the host of remote desktop, IE. the computer you want to access remote/control? It is not clear from your description, although I assume it is the office.

• 11 GR 2 grid Setup "SSH without password problem" on AIX 7.1

  Hello

  The installer was able to login SSH without password in configuration between the nodes, but when I tried to test it, and then I got the below error:

  [INS-06006] Connectivity SSH without password do not put in place between the following nodes: [ud1 UD2].

  I tried to install .ssh without password between node1 and node2. It worked.

  But when I tried to connect without a password with the Node1 node2 .ssh. It did not work. SSH asked a password.

  On node1, were among other id_rsa id_rsa.pub and identity and identity.pub. But on Node2, there was only identities and the identity.pub.

  any help will be greatly appreciated.

  Thank you

  When you configure the RAC, it is a mandatory task to configure connectivity without password SSH (Secure Shell) between the nodes. SSH connectivity configuration is essential among the nodes of a cluster because the YES program uses the ssh and scp commands internally during the installation stage to perform remote operations, in which it copies the software from local to other nodes.

  I suggest that you try once more configuration. I give below steps:

  (1), log in as the Oracle user on the first node in the cluster (in our example, it will be on the raclinux1) and execute the following sequence of commands:

  [orac1e@raclinux1]-$ mkdir ~/.ssh

  [orac1e@raclinux1]-$ chmod 700 ~/.ssh

  [orac1e@raclinux1]-$/usr/bin/ssh-keygen t rsa

  Generate the key pair public/private rsa.

  Enter file in which to save the key (/ home/oracle/.ssh/id_rsa):

  Enter the password (empty without password): enter same password again:

  Your identification has been recorded in /home/oracle/.ssh/id rsa.

  Your public key has been saved in home/oracle/.ssh/id_rsa.pub.

  The fingerprint of the key is: f0:89:ac:ba:83:31:c4:43:97:3e:9's: a5:60:c1:8e:e6 [email protected]

  (2) when the system asks you the location of the key, accept the default settings by pressing the Enter key. Once this configuration is done on the first node, repeat the same steps on the rest of the nodes (in our example, repeat the same step on the raclinux2 node).

  (3) now, switch back to the first node (raclinux1) and run the following command to add the authorization keys. After you add the authorization keys, copy the file authorized_keys to other nodes by using the scp command, and enter Yes when prompted.

  [orac1e@raclinux1]-$ cd ~/.ssh

  [orac1e@raclinux1]-$ cat id rsa.pub > authorized_keys]

  [orac1e@raclinux1]-$ scp raclinux2:/home/oracle/.ssh authorized_keys

  The authenticity of host ' raclinux2 (192.168.2.202) cannot be established.

  Of the key RSA is 52:13:31:e8: this: ec:47:b8:06:09:4 b: c9:aa:c5:35:81.

  Are you sure you want to continue connecting (yes/no)? Yes

  WARNING: Permanently added 'raclinux2, 192.168.2.202' (RSA) to the list of known hosts.

  Oracle@raclinux2's password:

  authorized keys 100% 406 0.4K8/s 00:00

  (4) now go back to the second node, (raclinux2) and run the following command:

  [orac1e@raclinux2]-$ cd ~/.ssh

  [orac1e@raclinux2]-$ cat id rsa.pub > authorized_keys]

  [orac1e@raclinux2]-$ scp raclinux1:/home/oracle/.ssh authorized_keys

  The authenticity of host ' raclinux2 (192.168.2.201) cannot be established.

  Of the key RSA is 52:13:31:e8: this: ec:47:b8:06:09:4 b: c9:aa:c5:35:81.

  Are you sure you want to continue connecting (yes/no)? Yes

  WARNING: Permanently added 'raclinux2, 192.168.2.201' (RSA) to the list of known hosts.

  Oracle@raclinux1's password:

  authorized keys 100% 406 0.4K8/s 00:00

  (5) after you add the authorization on the second node keys, copy the file to the other nodes using the command scp, as shown in the previous example and enter Yes when you are prompted.

  (6) after setting up the SSH installation successfully through all the nodes, we will perform the following test on each node, from the first node to connect without password between all nodes to follow the recommendations of the Oracle:

  SSH raclinux1 date

  SSH raclinux2 date

  SSH raclinux1-private date

  SSH raclinux2-private date

  SSH raclinux1 - sjh.com date

  SSH raclinux2 - sjh.com date

  -taking of Oracle 11g R1/R2 Real Application Clusters Essentials - Ben Prusinski, Syed Jaffer Hussain

• SSXA: How it connects to Content Server as a sysadmin without password?

  Hello world
  
  We use SSXA 11.1.1.5. The documentation says that SSXA engine accesses the content as a user admin server internally:

  the adminUser userId is used to extract the data from the content server file and store it in the Studio of Site for external Applications cache.

  With little investigation, we found that the admin user is configured in the configuration file wcm - config.xml:

  <contentServer connectionName="MyPortal" adminUser="sysadmin"/>

  However, we are confused because no password is necessary. (In fact, the XML < contentServer > element has an attribute called "adminPassword" but it does not matter what we put in it - the continuous SSXA engine to run. The user interface does not include a password either, field that makes us think that this attribute is deprecated).
  
  Could someone explain to me how SSXA connects to the content without password server? If it uses some special API that does not require a password, it's a security breach?
  
  Thank you
  Dimitar

  It uses the remote Client of Intradoc (IDRC). http://download.Oracle.com/docs/CD/E14571_01/doc.1111/e16819/toc.htm

  It is not a security hole because there is a UCM configuration parameter called SocketHostAddressSecurityFilter that determines which network addresses are allowed to use CRMI.

  Jonathan
  http://redstonecontentsolutions.com
  http://corecontentonly.com

• This will destroy our setup SSH without password?

  Version of the operating system: Solaris 5.10
  
  We have a 2 RAC of Production on Machines A and B Environment node. Every day we want to move some files to A backup server called C. Our FTP ports are disabled due to a security policy. SCP only will work.
  
  SCP does not work with passwords. I need to implement SSH without password between A and C. So, I need to create a new file authorized_keys in C? What should I do in Machine a side? He already has a folder called

  authorized_keys

  file that contains "keys" of nodes A and b. should create a new file authorized_keys with a different filename as

  authorized_keys2 

  in both machines (A and C)?

  No need to delete the existing configuration - add just the public key of the node A to the keystore allowed on node C. You should already have an id_rsa.pub on node A in the user .ssh directory. Just copy to node C and add the content to the authorized_keys on node C for the user you connect as (do not replace the content). Just be sure that you use the existing key and do re - NOT generate keys using ssh-keygen, as who will scan your existing key and break the ssh between node A and node B.

  Implies that the user will be the same on the server - if it isn't (that is, using 'oracle' on node A and "backupguy" on node C), then you have to just put the file id_rsa.pub oracle of node A in the authorized_keys of backupguy on node C. In addition, with different users across nodes, you must specify a user:

  SCP filename backupguy@nodec:/path/to/backup/files

  That should be simple!

  K

• How can I remove phone without password icloud account

  How can I remove an account from my iphone icloud 6 without password.

  You can not. If the Apple ID that the iPhone is locked is yours and you can provide original proof of purchase to Apple, they may be able to help.

  If you are not the original owner of the phone and that Apple ID it is not yours, the phone doesn't help you.

• How can I remove Icloud account without password?

  How can I remove Icloud account without password?

  Some things to note-

  -an impossible to delete an iCloud account if you can remove a device.

  -If your wish is to remove an iCloud account, simply remain dormant.

  -to answer your question, if the account the disconnection of a device, you will need the password to the account.

  -If you have forgotten the password, then go here https://iforgot.apple.com

• Is that a way firefox will store the information of user name for a site without password information?

  some other browsers allow a user name to be automatically filled in and saved so you just enter a password. It seems that Firefox does not have this option. Is that a way firefox will store the information of user name for a site without password information?

  This works! Thank you very much.

• I made a mistake when I put my master password.

  I recently had a new hard drive put in. When I put my master password, I apparently made a mistake in typing. Can I retrieve or reset the password?

  Assuming you are using it for a while and he saved many connections we wellworth try any obvious permutations of typos to see if you can get that way.

  You can reset it, but then you lose the saved passwords

  • See reset your master password if you forgot

• How can I remove iCloud iPhone without password?

  How can I remove my iPhone without password iCloud?

  You can do that without the help of the former owner of the phone

  It's the lock of activation, which is an anti anti-theft

  Find my iPhone Activation Lock - Apple Support

  UF, you bought the unit second hand - try to get the original owner of the block removal or return the unit for a refund

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Phone is unlocked without password

  https://www.Facebook.com/uniladmag/videos/2210614415628272/

  This video shows how to unlock without password, and it works. Apple needs to fix it as soon as possible.

  Apple didn't need to do anything. The phone has been unlocked when the user used his finger to unlock via contact ID. Please stop watching these useless videos.

• removal of existing without password icloud account

  removal of existing without password icloud account

  What you mean? Remove it from where? What did you do exactly?

  GB

• reset the macbook pro to factory without password?

  I bought a preowned pro macbook and didn't know that it had not been reset, so I still have stuff from all the former owner top. I need to get back to factory settings so that I can restart it with all my accounts but can't without password apple of the previous owner, who I have otherwise so need to reset the laptop.

  If the Lion or later then start Recovery

  OS X: on OS X Recovery - Apple Support

  and the boot disk to format and install OSX via recovery

  What to do before you sell or give away your Mac

  ID Snow Leopard or earlier boot to install DVD and format the boot disk and install OSX.