put the pre screen on when the pre is closed

Similar Questions

• [Bug] Pre mode screen 'night' when the Touchstone during the day in 1.3.1

  After the 1.3.1 update when I put my Pre on the touchstone to charge, it seems to behave as it does in the night (or dimly lit room): after 30 seconds, the screen fades, and then the lock screen comes on.  1.3.1 when I put my Pre on the touchstone in the light of the day, the screen would stay on and active (without lock).  I really liked this feature of the touchstone - I have it next to my computer on my desk, and it's a bit like an additional screen.

  Is this a bug or what?

  Called Palm support today and the response has been as part of the upgrade and no way to go back to the way it has been.   Wrong, this is a good feature don't know why they spend it.

• Put the pre in usb mode

  When I connect my Pre to your computer, it will appear as a removable drive. When I try to add a file, I get the message "Insert a disc into drive N."

  How can I put the Pre in USB mode?

  When you connect your phone to usb, the phone should be three choices 'Media Sync' "Usb Mode" "Dependants" choose usb to manually add files.

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Is it safe to use keyboard if I put the microfibre cloth on top of the keypad cover when I close the mac? (mac pro retina display)

  Hi all.

  I use Kuzy keyboard cover on my mac pro retina display.

  I read that Apple does not recommend to use the keypad cover when you close the mac of retina display.

  So I wonder if it would be dangerous to use key cover if I put the microfibre cloth on top of the keypad cover when I close the mac?

  In this way, would the retina display not scratched by a keyboard cover?

  Please share an idea about it, thank you.

  It is not only the possibility of a scratch, but also that the MacBook Pro retina are very thin. Adding a keyboard cover and a cloth could lead to damage and it closes does not correctly. I have personally not use either on my rMBP.

  To activate the thin design of MacBook Pro with computers of Retina display, the distance between the screen and the top box is designed to close tolerances. Do not use palm rest covers or covers of CAP, because the extra thickness can interfere with the closing designed screen position.

• HP ATI Radeon HD 7450: Video card puts all monitors to sleep when the HDMI cable is connected

  I'm having a problem with a brand HP ATI Radeon HD 7450 part number 672459-001. When I plug a cable HDMI card put the monitor in standby. And when I unplug cable HDMI, the screen stays off until I restart the computer. The HDMI cable needs to be connected to anything in this case. It makes me batty to be honest

  Jim Hutto
  I do not work for HP.
  I am a computer technician and a passion for computing with more than 32 years of computer repair and networking experience

  Never mind, figured it out. It is the HDMI2av converter. The converter might work power HDMI port or a separate power connection. The card is not enough voltage to run it. Then when I plugged it without external power supply it would draw so much tension that he caused the GPU to lock up.

• Equium M50-164 crashes when I put the battery

  I have an Equium M50-164.

  I got it over a year now without any problems. I turned on this morning and it crashed (just a white, black screen) even when I tried to open it in safe mode. I have taken out the battery, but left the power cord in and it worked fine, without any problems at all, but when I put the battery with the power cable it crashed again. When you try to start it with just the battery, he would not do anything no lights, no boot at all?

  Help, please.

  Hello

  Does not sound good
  Only the battery is dead and or malfunction of the electronic power supply on the motherboard.
  The two cases are possible.
  Generally, the common user is not able to fix something like this.

  Of course, we can run here on the malfunction but I n t think this will help you.
  In my opinion, the laptop must be verified and some diagnostic tests must be started

  Contact the ASP in your country and explain the guys the situation

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• When I put the computer on the mode 'sleep' it goes into sleep mode and then restarts on its own.

  Have Vista Home Premium. When I put the computer on the mode 'sleep', it closes and moves to the State of low consumption with the screen. But in a few seconds without touching the key or mouse it starts again. What is going on?

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C

  Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but when I put into hibernation or to stop it charges more quickly. Would appreciate any help as soon as POSSIBLE. Its a Dell Latitude E6400, windows 7

  Diagnosis

  The video "Refresh" is switching between 60 (on food) and 50 Hz (on battery), and the screen goes momentarily empty.

  Solution

  So what about current alternative, office > right click > properties > settings > advanced > monitor. Here, under the display settings, set the refresh rate of the screen at 50 Hertz. After you apply these settings, the flashing problem gets fixed.

• I NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he try to put the itunes thing but

  NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he tried to put the itunes thing but it says enter password I put in what I rember, then said lokced for five minutes help me pls

  Without knowing the password for your iPhone, there is no way to unlock it, bring even you to the Genius Bar. If you continue to enter the wrong password, you will be locked out of your iPhone, and your data will be unaccessable.

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• Hi me Mamadou Moustapha I bought apple that i phone 6s a few days find out who the best phone of the world, because the day I bought it, I had questions on screen and when I went to the service center, they said they're going to update they have updated o

  Hi me yedess apple that i 6 s phone few days back knowing have the best phone in the world since the day I bought that I have questions on screen and when I went to the service centre they said they're going to update, I bought they updated after that I have the same problem now they say they're going to fix very terrible situation for apple this new product which has manufacturing defect they will repair, I asked to change device they deny because they want to fix m single i face the problem of the first day of the customer are powerless and that they only make just crazy.

  It's what warranties are for. If you bought the phone from Apple or an Apple authorized reseller, iPhone, you have 14 days to return it for a refund. After that the Bank should replace the phone. If you did not buy from Apple or a shop authorized, you must respect the terms of this store. However, Apple will always replace the phone, if you contact them directly.

• How to disable the screen saver when you watch videos in full screen in firefox?

  This only happens with Firefox, other browsers videos play normally and without interruption. I want to keep my window screen saver by default but not when watching full-screen mode.

  The Flash Player plugin must normally block the system to go to sleep, reduce the brightness of the display or go to the screen saver when you are using full-screen. It is strange that you have this problem with Flash.

  There are workaround solutions such as the use of an add-on or an external program that simulates the movement of your mouse, but those who really shouldn't be necessary.

  VLC, I don't know.

  Furthermore, you closed and restarted Windows because this problem first occurred? Just in case where some component shared Windows crashed.

• When I put the profile command in run it gives me a firefox page

  When I put the command of the profile ("C:\Program Files\Mozilla Firefox\firefox.exe" - p) in win + R (run), it gives me a firefox page

  This will happen when Firefox is already running, either Firefox is open or the firefox.exe file is "hooked" in the Task Manager > processes tab.