Put the screen application.

Similar Questions

• How to put the screen name? (edited by Mod..)

  Hi I want to know how to put the screen on my Ant name

  Hi Yuvrajm65418840,

  Please see the document shared for more information:

  Getting started on the Adobe Forums

  I hope this helps!

• Cannot put the screen into hibernation

  I recently installed Windows 7 using a new PC Gateway. Now, I can't get the display turns off when not in use. as I could in XP. My monitor is a new Samsung LED.

  What I want is to have the screen turns off after an hour or two of non-use and be able to quickly put back by moving the mouse or pressing a key. I tried to change all the settings for the screen savers and energy saving options, but the screen remains always lit throughout the day, even with no use for several hours.

  What I forget? Welcome to suggestions.

  Have you tried this:

  Start-> Control Panel-> Power Options-> choose when to turn off the display-> select your desired time in turn off display-> save changes

  Now your monitor should turn off once the computer is idle for the specified amount of time.

• Don't see the screen applications & data after the update means that your data has been erased?

  I've just updated to iOS 10 and there is installed, but it shows a screen called Apps & data and gives options to restore the data, set it up as a new iPad or move data from Android. I was wondering if it meant that my data has been deleted completely?

  It's an iPad running iOS 10 4.

  Yes. This screen is available only after a deletion.

• I have LR 6.0.1 on a desktop iMac computer since I updated about 9 months ago.  I still have LR 5.7 on my Mac laptop.  How can I put the portable application 6.0.1 also?

  I have LR 6.0.1 on a desktop iMac computer since I updated about 9 months ago.  I still have LR 5.7 on my Mac laptop.

  How can I better put LR on my laptop for 6.0.1?

  The Adobe license allows 2 activations, so you would just copy your installation to version 6 files to your other computer and install the upgrade in the same way that you did on your desktop

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• Keyboard shortcuts for the screen saver does not

  When upgrading to Mac OS Sierra, the hotkey to put the screen in sleep mode (control - shift - (power or Media Eject button )) has stopped working. As I use this command several times a day and don't know not of any other way to put the screen in sleep mode, it's one of the few reasons why I consider really return to El Capitan.

  Someone knows how to fix this?

  Hi Zwolff,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with the keyboard shortcut to put your display to sleep. It is certainly a handy to use feature and I'm happy to offer some suggestions to help.

  The first thing that I recommend you try safe mode connects. This will clear the caches and conduct audits at your connection. Here you can find the steps for safe mode:

  Try safe mode if your Mac does not end commissioning

  I also recommend you test this in a test on your Mac user account. There may be software or a specific file of the user that generated problems with your shortcut.

  How to test a question in another account on your Mac.

  See you soon!

• How to choose the screen resolution of 800 x 480 on Libretto 110CT

  Hello

  I have a 110CT and the options available for the resolution of the screen in Win98 are 640 x 480 and 800 x 600. The screen is 800 x 480 and I wish I could use that as the smaller resolution res is too small and more requires to move the cursor to see the entire screen.

  Is it possible to put the screen at 800 x 480 in Win98?

  Thank you
  Chris

  The screen display resolution depends on the graphics driver.
  If a graphics driver supports the resolution of your favorite, then you would be able to choose.
  But if the driver doesn't take in charge, then unfortunately you will not be able to choose.

  Welcome them

• The screen of my laptop not turn on after being in mode 'sleep'

  Let me start by saying that I am a novice in computer repair, so advice please put in laymon's terms! My problem started a few weeks ago, when my Dell inspiron 1526 would not resume when I opened the lid of the laptop.  (I rarely have to cut the power, just close the lid) When he started to arrive, I have to cut the power and turn off several times to get my computer to come back.  I did research on the internet for a solution (because I had resorted to all leaving the lid open).  I found one that worked for me... I did the following:

  Click on the start menu, then right click on "computer" and click Properties.
  Click the Manager option of devices on the left.
  Under "System devices", one of the first should be the appliance close the lid.  Right click and click on "Update Driver Software".
  Click "Browse my computer...". ", and then"Let Me pick from a list... ". »
  Uncheck it "Show compatible Hardware".
  In the list on the right, scroll down, select Manager of Volume and click Next.

  It was running great until the other day when I accidentally clicked on the Start button and then put the computer in mode 'sleep'.  Well now the computer screen lights up not at all.  All my family and I spent the weekend all put under tension of the laptop then turn it back, nothing will do.  I am now in panic mode since I use my computer to work from home as well as to take some college courses online! I found a lot of advice on this subject, but all of them are to be able to actually see what is on the screen! I need to know how to put the screen on the first!  I tried to take out the battery and unplug it but that no longer works. I know the computer becomes power b/c I can hear fans and restarting, but the screen does not light.  Help, please! From what I read it seems that it is a big problem with windows vista users!

  Hello

  Since it is not initialize, I suggest you to contact the manufacturer of the laptop computer for more help with this.

  http://support.Dell.com/

  Diana

  Microsoft Answers Support Engineer

• Shake/flickering of the screen.

  Since I bought my new computer, the screen flickers or shakes annoyingly. It happens only if I'm only on my desk, nothing doing, but if I start using Google Chrome for example, the screen begins to blink a lot, it becomes even more intense if I watch a video.

  Luckily I found a temporary solution for this: let my computer go on screen saver. The screen stops flashing for as long I have my power supply of the computer on (even if I put it on sleep), but if I shut down or restart my computer, I have to wait again, screen saver to correct flicker.

  Have to wait for my computer go to the screensaver really bothers me whenever I turn it on even if I put the screen saver timeout for only 1 minute.

  I'm suspecting that it is caused by my graphics card, but not quite sure. I tried with another monitor, but it still happens, so it's not caused by my monitor.

  I have Windows 7 with ATI Sapphire Radeon HD 6870. My monitor is LG IPS225.

  Is this a known problem and is there a solution permanent for this?

  EDIT: My screen is off, do not go on the screen saver.

  Control Panel-> hardware and sound-> power-> Settings.This of Plan Options change are where I change the timer to 1 min when I turned on my computer and then change again to where I normally keep it's 10 min.

  First, turn off and unplug all cables from your PC.  Hold the button for 7 seconds.  Open the PC.  Remove the video card and reinsert it firmly.  Make sure that the cables that connecting now are correctly connected.  While you're there, you can do the same "re-Assisi" of all the plug-ins including caps and memory, hard drive controller plugs, etc.

  This could be a driver problem.  There may be an update to the driver.  Try to roll back the previous driver if it is available.

  Manager devices, right click on the ATI device, choose Properties, and then choose restore.  It is also possible that there is a newer driver available on the ATI site, which solves this problem.

  I believe that the most likely cause is your videocard itself.  Check to see if it still under warranty.  It could very well be.

  Moreover, the screen save time-out is definable.  You can even go to this place and click a button to enter this mode temporarily.

• I accidentally this marking of the splash screen, the desktop application, how do I put back it?

  How can I put the application on the start screen?

  I assume you mean Windows 8. Didn't know that it was possible to lose this shortcut, kind of reinforces my doubts about it like a BONE...  I don't use it myself so no help to restore this shortcut SE (doesn't know what it would take to link to, nor exactly how you go about adding shortcuts to the start screen)- but if I remember correctly the keyboard shortcut for show desktop is (Windows key + D).

  Hope it will be useful, at least.

• Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello

  You can enable the detection of wrist as well as an access code and unlock it with the iPhone:

  • On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
  • On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
    • Also in the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.

  You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:

  • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
    • Active screen Wake on revival of wrist, and;
    • Choose if the watch should resume last activity or see the Face of the watch.

• Phone sleeps, when I put it down on the screen.

  When I put my phone down on his screen, then it automaticly sleeps. I found it really annoying. Is it possible to disable this option? I have already searched for it in the screen and energy saving settings, but I did find something interesting.

  It is not an option with Sony that lcoks your phone when you face the screen down. Check the smart locks, have you configured something there? Also, check how much time is left until it crashes... This could be the problem. If none does not work, then an app that is the cause. Check your recently installed applications. If all else fails, reset your phone but make sure it is supported up to... everything will be erased.

  Good luck.

• BlackBerry, Blackberry Q5 Q5: Verbal announcement of what is on the screen, can not close the applications by typing, cannot access settings

  Hello

  This mornign I had a surprise. For some reason the phone seems to freeze when I open facebook. I thought who would be corrected by restarting, but facebook would be available temporarily and then it would freeze. The same thing happened with everything I opened on the Q5.

  In the end, the phone seems to be put in place for people with a visual impairment. Whenever I touch the screen, and then even when I want to reconnect, there would be verbal instructions and descriptions of what is on the screen. For example, I received the instruction to slide up to open a session, and then whenever I touched one of minimized applications the phone would be such which program it is and what number it is out of the apps on screen.

  Is there a shortcut on how to disable this setting?

  Or what I can do to regain access?

  Thank you

  Hello

  From what you describe, it seems that somehow you have turned on the functions of "accessibility". Go to settings > accessibility and check all those involved to be sure of anything you want.

  Good luck!

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• Instill the 11 elements (mac) with OSX El Capitan worm. 10.11.4 puts icon on the screen, but then nothing, any help please.

  Instill items 11 (mac) with OSX El Capitan worm. 10.11.4 puts icon on the screen, but then nothing, any help please.

  I thought I would try the version test, but with the same problem, will not work.

  Any help please would be appreciated

  Concerning

  MP

  How to open third-party applications to developers not identified in Mac OS X "Mac tips.