Put the string value in a table

Similar Questions

• Replace the string value of table

  with cte as)

  Select val '123', 'abwec' double val1

  Union of all the

  Select "456" val, "mowerw" double val1

  Union of all the

  Select val '709', 'wkwere' double val1

  Union of all the

  Select val '078', 'awerwewerwreq' double val1

  )

  Select * from cte;

  -incoming string

  "asdasd123ewrwer@87w8eopiu456werwer@asdwer709@ewrwerewrwqqwezxder078 @..."

  need to replace like 'abwec' 123 and 456 as "mowerw" and 709 as wkwere and 078 as 'awerwewerwreq '.

  How to replace the string value of the string

  I'm going to the table which will have mapping information I need to see the incoming string and replace the appropriate value of the val to val1

  something like

  Of

  "asdasd123456werwer@asdwer709@ewrwerewrwqqwezxder078ewrwer@87w8eopiu @..."

  TO

  "asdasdabwecewrwer@87w8eopiumowerwwerwer@asdwerwkwere@ewrwerewrwqqwezxderawerwewerwreq@..."

  By using the TYPE clause.

  with cte as

  (

  Select val '123', 'abwec' double val1

  Union of all the

  Select "456" val, "mowerw" double val1

  Union of all the

  Select val '709', 'wkwere' double val1

  Union of all the

  Select val '078', 'awerwewerwreq' double val1

  ),

  input_tbl

  as

  (

  Select "asdasd123ewrwer@87w8eopiu456werwer@asdwer709@ewrwerewrwqqwezxder078 @..." input_str

  of the double

  )

  Select max (input_str) Dungeon (first order by desc NWR dense_rank) input_str

  de)

  Select rno, input_str

  de)

  Select rownum NWR

  val

  val1

  input_str

  count (*) over() cnt

  from cte

  Cross

  Join input_tbl

  )

  model

  dimension (NWR)

  measures (val, val1, cnt, CAST (input_str AS VARCHAR2 (4000)) input_str)

  (

  input_str [any] = replace (nvl (input_str [cv () - 1], input_str [cv ()]), val [cv ()], val1 [cv ()])

  )

  )

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• kindly tell how to use the unique value of a table with the index 0

  kindly tell how to use the unique value of a table with the index 0

  Hi
  
   
  
  Yep, use Index Array as Gerd says. Also, using the context help ( + h) and looking through the array palette will help you get an understanding of what each VI does.
  
   
  
  This is fundamental LabVIEW stuff, perhaps you'd be better spending some time going through the basics.
  
   
  
  -CC
  

• acquire a signal and the rms value in a table every second

  Hello everyone,

  Sorry, but I am known in the world of LabView and I'm going crazy because I can't understand how to do a simple thing (or what it tends to be in my mind).

  As said by the object,
  my wish is to acquire a digital (a through the DAQmx) continuous (it's ok for this part), get the RMS (or average) of such acquired signal (thanks to the Amplitude and levels of measurement, for example) and put the value in a table (1 d); and, every second.

  In one sentence: acquire a signal, the average value, put in a table, and then restart each second. In the end, for example, the program for 1 minutes gives me 60 value in the table.

  Is someone can help me?

  Thank you in advance.

  Viviogs.

  First of all, I'm not sure that you can be sure exactly a second measurement using this technique.  If the precise timing is important, I think that you need a timed loop.

  That said, if the only problem you have is how to write the table indexed in a spreadsheet, you just need to use "Write in the worksheet file."  See here.

• Check the string value when using xdoxslt

  Hello

  I'm new to the BEEP and will have questions in writing this simple code for a model RTF. In plain language, that's what I want to do:

  If (instr(FirstName,'concern',0) > 0 and instr(LastName,'concern',0) > 0 and instr(MiddleName,'concern',0) > 0) then the VNAME variable value "

  on the other

  If (instr(LastName,'1-',0) > 0), then set VNAME variable FirstName

  on the other

  the value of VNAME variable FirstName + "" + name

  Finally... show the VNAME variable

  ===========

  I wrote it, but it doesn't work:

  declared variable... Initialize it to x.

  <? xdoxslt:set_variable($_XDOCTX,_'v_RTPMName',_'x')? >

  String value of control-> - error.

  <? If: (xdoxslt:Instr (lower(coFirstName|| coMiddleName || coLastName), "abuses", 0) > 0)? >

  <? xdoxslt:set_variable($_XDOCTX,_'v_RTPMName',_'')? >

  <? end if? >

  write the variable

  <? xdoxslt:get_variable($_XDOCTX,_'v_RTPMName')? >

  Thanks for the help!

  For a quick overview,.

  InStr is belong to the xdofx family, must be used in this way instead of xdoxslt:Instr()

  For example: If condition 1 0 otherwise true back

  0 then 1 or 0 end if? >

• How to limit the string value?

  How to limit a string must be a value of a group of parts. For example, a string must be one of the following values: abc defg h, ijklm
  
  Is there any method of the JAVA API on how to limit a string value?

  No - you will need to add the necessary code to the method "set" and make the instance of private variable so that the "setter" is used.

• D2KWUTIL Read_Registry - only reads the string values? How to read the binary?

  Hello, everyone!
  I use forms and reports 6
  D2KWUTIL,
  WIN_API_ENVIRONMENT. Read_registry
  to read the Windows registry values.
  The service works very well with string values (that is, type REG_SZ registry).
  but fails with NO_DATA_FOUND binary values, such as type REG_DWORD.
  
  D2KWUTIL is really unable to work with other types of chains?
  If so, what can be used instead?
  
  Appreciate all the guidance,
  Roman
  
  Published by: user9232995 on November 18, 2010 23:19
  
  Published by: user9232995 on November 18, 2010 23:20

  It's d2kwut60.dll.

• return the minimum value from a table

  Hi all, how can I output the lower value within an array of numbers?

  I have this but it does not work, it is always the first number in the table.

  function minF(a:Array):Number {var min:Number = [0];      for (var i: Number = 1; i >.) Length; i ++) {if (a [i] > min) {min = a [i];}           } else {trace ("buahMin!");           return min}}; }

  Thanks to you all.

  This is because you have the sign on your conditional loop wrong.

  You must make the comparison for all I less than your length of array.

  function minF(a:Array):Number {}

  var min:Number = [0];

  for (var i: Number = 1; i

  min (min =

  }

  return min;

  }

• Put the param-value property of web.xml relative instead absolute

  Hello
  
  In my web.xml file, I value < param > absolute direction pointing to the properties file. But this method has a problem when I run the application in the other computer, because I have to change the direction to run the application again. For this reason I want to put the direction bit up to the application, but I don't know how to do it.
  
  Currently the strutcture web.xml is the following:
  
  ..............
  < init-param >
  < param-name >
  Chart.Properties < / param-name >
  < param-value >
  E:\\Aplication\\web\\WEB-INF\\chart. Properties
  < / param-value >
  < / init-param >
  
  ..................
  
  I would be very grateful if someone could help me solve this problem.
  
  Concerning

  There are always alternatives :-)
  In this case, the alternative solution would be to use the ServletContext getRealPath() or getResourceAsStream() method.
  In this way, you can load a resource from your web application, regardless of where it is deployed.
  It's practically the same solution, except for the resource specified from your web application, rather than the path of the classes.

  It is a perfectly acceptable method of Classpath and alternative might be better in terms of use of the servlet API rather than the standard java classpath.

  see you soon,
  evnafets

• Win 8 again to choose a browser, even after I put the default value, I have a screenshot

  On opening of browser, I wonder to set the default browser. After I do I get the message send me options I guess come from Msoft: continue using FFox, choose IExp, choose the program from the store.
  I have a page, if you need it.

  Keep up the good work, guys.

  Your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.

  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
  You can check its contents with a text editor (right click: open with) If you do not create this file yourself.

  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• convert the string into individual components table

  Hello Experts,

  I would like to display an array of strings in a display of text/string. for example:

  My array of strings is:

  ['I', 'L', 'O', 'V', 'E', 'L', 'A', 'B', 'V', 'I', 'E', 'W'], and I want to show this picture as I LOVE LABVIEW in an indicator of the string and not an indicator array.

  How do I do that? I tried flatten to sting, but it added a lot of zero to the channel indicator, and the display is not only correct appearance.

  I hope my question makes sense.

  The functions of concatenate strings will do exactly what you want.

• switch the case: should use the string value?

  in the example below, I have two points to a switch box. The first works and is not the second. In the second I tried to use a variable to concatinate the string for the case. For some reason whenever I do, it is not locate the second case. It seems like it should work...

  for (c = 1; c < = numItems; c ++) {}

  model var = app.project.items [c];

  var scale = 100;

  If (comp instanceof CompItem) {}

  for (i = 1; i < = comp.numLayers; i ++) {}

  {Switch (COMP. Layer (i). Name)}

  case 'textLines_NFLAM': we're working //This

  targetWidth = 1400;

  COMP. Layer (i).scale.setValue [(scale, scale);]

  setTextLayer_caseSensitive (comp.layer (i), lineValue);

  If (scaleTextLayer (COMP. Layer (i), comp.layer (i).sourceRectAtTime(1,_true).width, targetWidth)) {}

  modifiedLayers.push (comp.layer (i));

  }

  break;

  showName var = 'TA ';

  case 'textLines_' + showName: / / it does not work unless I change to: case "textLines_TA":

  targetWidth = 1430;

  COMP. Layer (i).scale.setValue [(scale, scale);]

  setTextLayer_caseSensitive (comp.layer (i), lineValue);

  If (scaleTextLayer (COMP. Layer (i), comp.layer (i).sourceRectAtTime(1,_true).width, targetWidth)) {}

  modifiedLayers.push (comp.layer (i));

  }

  break;

  }

  }

  }

  }

  It works for me (at least it works):

  myname = "textLines_TA"; var

  showName var = 'TA ';

  {Switch (myname)}

  case 'textLines_' + showName:

  Alert ("caught");

  break;

  by default:

  Alert ("no to not catch");

  break;

  }

  I suspect, there is something else.

  Dan

• by programming the string value upper limit of table 3.1 teststand

  I'm relatively new to using Testand... so I would be grateful for all the help:

  I created an array of strings using an ActiveX/COM action: PropertyObject.NewSubProperty (lookupString, valueType, EnTableau, typeName, options)

  It creates an empty array of strings [0.empty]. How to programmatically set the upper bound of the array (for example the table of strings [0.8])

  Due to my requirements of the application, I have to use Teststand 3.1

  Thank you in advance,

  Ellas1

  Hello

  I think TS 3.1, you should always use the TS API PropertyObject.SetDimensions (later of TS that has been replaced by an array property), or you can use SetNumElements if it is a 1 d array. Of course, you can order these operate using TestStand.

• Writes the string data in a table

  Hello

  I am facing a problem in writing the data in the table. Here is its description:

  1. I created a code that reads the URL from OPC.server.

  2. I need to display it in a table. Since the number of URL is known, I defined the rows in the Table.

  3 but am not able to display these URLS in the table.

  This problem can be simply put on 'how to write string in the table. property node can be used and if so, what assets can be used?

  I'm still a beginner in this... so would like help of all my colleagues LabVIEWers there

  Thank you best regards &,.

  Nadège.

  This is a base update. The initialize array must be specified as a number greater than your maximum number of URLS.