PXI-1045 chassis with controller PXI-8110 failed to boot RT LabVIEW 8.6 when the device inserted to any Slot13-17

Similar Questions

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• With send and track online, I do not receive email notification when the recipient downloads

  With send and track online, I do not receive email notification when the recipient downloads. I can see real activity sent cloud files screen, and the "Notify" box is checked, as it should.

  Hi paulb57108117,

  When the recipient displays or download the document you will get the notification into account Adobe send & Track Document Cloud Help | With the help of Adobe Send & track.

  Kind regards
  Nicos

• I have a table with a button to add a line. Works fine except when the page is full, will not exercise in another page. Just gives me a blank page.

  See the image below. The figure is the view with the button. Figure 2, this is what happens when the expense to the other page, but failed to add more rows. In fact, it goes backward.

  FIGURE 1

  

  FIGURE 2

  

  Make sure to the table, you check the box "Allow the page break in content" under object-> Table

  ~ AEK

• When the function insert card reader with windows asking to format micro card?

  Hello, I have problem of a few days.when ever I insert the card reader with micro SD card windows asking to format...
  It is not happens with a single card, any micro SD card, I have insert Windows you want to format... but the card worked perfect in telephony, mobile and other things...

  I also try to use the same card reader & card in different windows 7 PC... It's working perfectly... .so help me with this...

  Hello

  Method 1:

  Follow the link below, run the fix it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  If the device is not detected in Device Manager, and check if it is the hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works

  2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. Check if it works

  Links: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly

  Installing the driver in compatibility mode: http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on another computer

• Problems with printing to a printer HP Laserjet 6 p to websites on the Beta 4. Any ideas?

  When I print from a Web site, the information comes out blurred. Thoughts?

  Identified bug & fix is in the final FF4.

• I have a Dell Dimension with external speakers that worked well until about two weeks ago, when the volume has become about 50% of what it was.

  Next week, the volume got lower and lower, until full volume it is than a bare whisper the sounds and audio.  I checked the Dell and Windows settings and tests and they all report the device working properly.  I bought a new set of speaker - same results.  Theere are no settings mute.  I have no volume icon in the taskbar and when I request I get the message that the sysvol.exe file is not available.  Does anyone have an idea for the fix?

  Hello

  · What is the service pack installed on the computer?

  · Do you remember all the recent changes on the computer before the show?

  Follow the steps listed in the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

  See also the link that has steps to add the volume icon in the system below bar: Volume icon is not displayed in the notification area, and you may receive an error message when you try to add: http://support.microsoft.com/kb/319095

• Problem with AE import jpeg as a framework, and I can expand in the timeline. Please, any suggestions?

  Does anyone know how to solve the problem of the AE import a jpeg image? I can't extend it beyond an image to the bottom of the timeline.

  You have imported a simple JPEG as a sequence of images rather than images. Import the file again in image sequence is not checked.

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Vista fails to boot after SP1 update. Lack file ntoskrnl.exe

  I have Windows Vista Home Premium and has just installed SP1 upgrade.  The PC now not restart, even in safe mode.  As soon as he tries to load Vista, an error message occurs: ntoskrnl.exe missing or damaged.  I tried to boot from the resettlement drive provided by Dell, but the same error occurs.

  I ran dell seed assessment tool and the material is very good.

  What should I do to fix this file?

  Thanks in advance.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

  As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• PXI-1042 q with controller 8331

  HI........

  I want to configure a single chassis PXI-1042 q with controller PXI-8331. I have connected 2 I\O Digital Digital card (PXI-6515) and 1 card(PXI-6514) I\O to this chassis. And I have connected this chassis to my PC with the serial cable (OR standard cable on COM 1) on my PC. But the problem is when I opened and Measurment Automation explore it dose not detect chassi eithre or any card I\O.

  I installed OR version 4.6.1 platform services.

  An obsrevation is led RX ON Chassi and dose led TX ON PC does not illuminate.

  Please guide me step by step configuration.

  Thank you

  Pravin.

  PBL,

  The PXI-8331 is not a serial interface, even if the connector looks like it, so it should not be connected to COM1.  It works when it is connected to a PCI-8331 in your host PC.  The cable must be a MXI-4 cable, for example 190957-03, not a cable series.

  If that's what you do, please report the LEDs on the two cards.

  -Robert

• PXI chassis with remote hot-plug

  Hello

  I use the SMU-PCIe8371 with SMU-8370 remote control instruments in the SMU-1075 chassis in Vista. In order to see my instruments in MAX the chassis must be turned on when I reboot Windows. If I disable the chassis while Windows is running, I have to restart to be able to reuse the instruments.

  Is it possible to make MAX see the chassis if it was not executed when Windows started or has been disabled while Windows is running?

  Thank you!

  Hello

  You can disable and enable the bridge PCI to PCI in the Device Manager, but this is not recommended or supported. I also suggest that you turn off the chassis while Windows is running, which is essentially the same as the withdrawal of a card PCI of your computer while the PC is on. This can lead to problems with your system, such as the database of MAX, which isn't very fun to solve. The recommended method to start your system is always chassis first, followed by the PC, and to stop, is PC first, followed by the chassis.

• PXI-8110 update to Windows 7 image

  I was wondering if someone has updated their controllers to a new OS?  Specifically, we received earlier this year a couple of PXI-8110 controllers incorporated with the gradient to XP option.  But now we wish we had Windows 7.  I was jumping that NEITHER would be able to provide the Windows 7 CD recovery of for this controller (because Windows 7 is an option) and I would have to pay the Bill for a license of Windows 7.  However, they said that it was not possible (OR - Please correct me if I'm wrong) and I have to install it myself.  So, any advice on this process would be appreciated.

  Thank you

  Paul

  Here are two INF files for drivers who have not installed correctly the first time.  Sara had sent to you about a month, there are and said they worked for you.  I am posting here in case someone else needs them as well.

  Note: This is not the ideal way to install drivers for a PXI controller.  The controller should come image correctly with all necessary drivers and the recovery disc as well.  If however you encounter the same situation, then you can try these.  They are drivers for the delivery of trigger PXI and WatchDog Timer for Windows 7 on the PXI-8110.

• 8105 PXI for PXI-8110 upgrade

  We are to modernize a PXI-8105 to a PXI-8110. When fit us the processor module into the 1045 cardframe (3 years), we have no response from the monitor and no idea if the keyboard works either. If we put the PXI-8110 return in the 1045 cardframe we just bought, so everything is OK.

  Anyone come across this before, or have any idea how to solve this problem.

  Problem solved.

  For anyone who comes across this, the advice of pickering needs a firmware compatible with the PXI-8110.