PXI-4110 deactivation and activation of the output

I'm programmming power CC PXI-4110. I want to activate and deactivate the outputs. I use niDCPower_Disable() to disable the outputs. and the use of niDCPower_Initiate() to activate the outputs. Problem is after I have activate the outputs with niDCPower_Disable() and with niDCPower_Initiate() that I lose all my settings as the output voltage. What I so niDCPower_ConfigureVoltageLevel() and niDCPower_ConfigureCurrentLimit() call before calling niDCPower_Initiate() then outputs are put to the required voltage.

I want to do is turn on and off just like pushing a button on a Panel.

For example, I call niDCPower_Disable() to open the relay switch.

It seems to me like there is a function niDCPower_Enable() which would close this switching relay and not reset all my voltage and current limit settings.

Any help on the best way to proceed would be appreciated.

Figured it out using:

status = niDCPower_ConfigureOutputEnabled (vi_4110_0, channel0Name, VI_FALSE);

to turn off and then I start with

status = niDCPower_Initiate (vi_4110_0);

In this way, my diet is ready to go, but my relay is open.

When I'm ready to close the relay I follow these steps:
status = niDCPower_ConfigureOutputEnabled (vi_4110_0, channel0Name, VI_TRUE);

Then later I want to open the relay call again I have only this:

status = niDCPower_ConfigureOutputEnabled (vi_4110_0, channel0Name, VI_FALSE);

Problem solved.

Tags: NI Hardware

Similar Questions

  • Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

    Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

    Can anyone help?

    Hi Richard,

    1. start Internet Explorer.

    2. Select Tools > Internet Options, and then click the Advanced tab.

    3. check if "enable third-party browser extensions (requires restart)" and click OK.

    4. close all Internet Explorer Windows.

    5 restart Internet Explorer.

    Let us know how it goes.

    You can also check out the following link and see.

    Quick fix | See a PDF on the Web

    Concerning

    Sukrit diallo

  • activation of the output graphs

    Hello
    We just bought a Lenovo ThinkCentre M93p 10A 9
    The motherboard offers three exits graphics
    The NVIDIA GeForce GT 620 additional graphics card has two graphics output

    Graphical interfaces on board are apparently disabled when you connect the NVIDIA card

    Is it possible, we can use all the outputs of five graphs?

    Thank you
    Yann

    Refer to this document:

    https://support.Lenovo.com/nl/NL/documents/ht062228

    I suggest also to the latest version of the BIOS.

    http://support.Lenovo.com/us/en/products/desktops-and-all-in-ones/ThinkCentre-m-Series-desktops/thin...

    The best (more reliable), to burn the ISO image to a CD, and update that way.

    And, under Windows Update optional updates, find an Intel graphics card and select this update.

  • Deactivation and reactivation of the campaigns

    I feel like this is a stupid question, but I can't find a clear answer in the documentation. I need to add a step to an active campaign. If I disable the campaign and you add the step, what happens when I register and activate again? Is it just keep chugging along where it stopped or he starts again?

    Hi Deb,

    Once you reactivate the campaign, that he continues to blow along the where she had stopped and nothing is affected.

    Kind regards

    Francisco

  • Passivation and activation of the parameters of view object.

    Hello

    I use Jdeveloper version 11.1.2.3.0.

    I have several settings view objects that are passed as default values for example:

    My view object has this query:

    Select user_id, username, password from user where user_id =?

    I'm a parameter passing pUserId with the default 'adf.userSession.userData.mfcUserId '.

    Everything works fine front of passivation.

    It's the activation method:


    protected void activateState(Element element) {
            super.activateState(element);
            if (element != null) {
                // 1. Search the element for any <jbo.counter> elements
                NodeList nl = element.getElementsByTagName(USER_DATA_ELEMENT);
                if (nl != null) {
                    // 2. If any found, loop over the nodes found
                    for (int i = 0; i < nl.getLength(); i++) {
                        NamedNodeMap attrs = nl.item(i).getAttributes();
                        if (attrs.getLength() == 2) {
                            Node userDataElementKey = attrs.getNamedItem(USER_DATA_ELEMENT_KEY);
                            Node userDataElementValue = attrs.getNamedItem(USER_DATA_ELEMENT_VALUE);
                            if (userDataElementKey != null && userDataElementValue != null) {
                                String key = userDataElementKey.getNodeValue();
                                String value = userDataElementValue.getNodeValue();
                                System.out.println("putting in userData:" + key + ":" + value);
                                this.getSession().getUserData().put(key, value);
                            }
                        }
                    }
                }
            }
    }
    

    All parameters that are passivees are properly recovered after activation, and I see them in the newspaper () "put in userData: But all the tables that use these settings are empty after activation.

    Like six months ago or a year before it was working properly after passivation and activation. Something has changed in the application or in libraries, and I do not understand what it is. I don't remember the time right, because this problem has been noticed recently, but probably existed for some time.

    Concerning

    Found the problem. I have a dynamic where the objects clause which is called for each of the opinions that I have this problem. After the execution of the view I always call a method that adds a where clause clause and then adds a dynamic parameter, and then run the query.  The final request looks like this:

    SELECT * FROM (SELECT select user_id, username, password from user where user_id =?)

    QRSLT WHERE ((NM_DECODED_NAME) upper: upper (EMAIL) | upper (PHONE) "like '%' | superior (?) |) '%');

    I pass a parameter to the view object. By default, this parameter is null.

    iter.getViewObject () .setWhereClauseParam (2, null);

    Basically, in the end, he becomes select column1 from table1 WHERE (upper (column1) | "like '%': superior (null) |) » %');

    et « % » || superior (null) | ' %' is equivalent to ' %' then it returns all records. But after activation this "null" is turned into something else and it will not return any records.

    This only happens after activation...

    It took me a year to find this bug already exists...

    Thanks for the help, Timo.

  • ESXi with VMI active on the computer, virtual and active in the kernel Linux = 10 x slower

    I have a performance problem with VMI enabled on Linux systems and of ESXi, does anyone have any advice for me?

    I have four boxes of ESXi.  One on one processor 1.26 Ghz, with double Hyperthreaded 2.26 Ghz (4 logic), one with dual Hyperthreaded 1.4 Ghz (4 logic) and the other on a single 3.0 Ghz hyperthreading.

    I don't think that any of them have hardware virtualization instructions Intel VI.  I use ESXi 3.5 U3 as host and Gentoo 2.6.26 as the client OS.

    I tried activating VMI on every machine and every time I do, the virtual machine performance is reduced by a factor of 4 to 10 times.  For example:

    Portage: game Dec 18 08:13:29 2008: 43 seconds

    Portage: Fri Dec 19 02:58:21 2008: 167 seconds

    Portage: Fri Dec 19 03:01:57 2008: 193 seconds

    Portage: Sat Dec 20 23:40:14 2008: 54 seconds

    Here are 4 emerges on Gentoo.  One with tickless and VMI disabled (43 seconds), one with active Tickless and VMI in ESXi and Gentoo paravirtual active VMI, one with HZ = 100 and active VMI and the last with tickless and VMI disabled (54 seconds).

    What I find online suggest VMI (when enabled in the kernel and in the .vmx file) should increase the speed or to all the least to stay the same.  I worked on it for a week and google to death on it.  I have consulted with other people running ESXi and they can reproduce the same problem when using Gentoo.  I have not tried Ubuntu Fiesty Fawn or any other OS, but I don't think that would matter much.

    If anyone is curious about the gentoo configs, a world file:

    App-admin/newsyslog

    App-admin/sysklogd

    App-editors/nvi

    App-emulation/open-vm-tools

    App-portage/gentoolkit

    App-portage/portage-utils

    App-shells/tcsh

    dev-util/strace

    NET-Analyzer/tcpdump

    NET-dns/bind

    NET-misc/bsdwhois

    NET-misc/ntpclient

    NET-misc/telnet-bsd

    sys-apps/pciutils

    sys-apps/slocate

    sys-boot/grub

    sys-fs/jfsutils

    sys-kernel/gentoo-sources

    sys-process/lsof

    sys-process/vixie-cron

    www-client/w3m

    Here is the configuration of the kernel:

    CONFIG_X86_32 = y

    CONFIG_X86 = y

    CONFIG_ARCH_DEFCONFIG = "arch / x 86/configs/i386_defconfig.

    CONFIG_GENERIC_TIME = y

    CONFIG_GENERIC_CMOS_UPDATE = y

    CONFIG_CLOCKSOURCE_WATCHDOG = y

    CONFIG_GENERIC_CLOCKEVENTS = y

    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST = y

    CONFIG_LOCKDEP_SUPPORT = y

    CONFIG_STACKTRACE_SUPPORT = y

    CONFIG_HAVE_LATENCYTOP_SUPPORT = y

    CONFIG_FAST_CMPXCHG_LOCAL = y

    CONFIG_MMU = y

    CONFIG_ZONE_DMA = y

    CONFIG_GENERIC_ISA_DMA = y

    CONFIG_GENERIC_IOMAP = y

    CONFIG_GENERIC_BUG = y

    CONFIG_GENERIC_HWEIGHT = y

    CONFIG_ARCH_MAY_HAVE_PC_FDC = y

    CONFIG_RWSEM_XCHGADD_ALGORITHM = y

    CONFIG_ARCH_HAS_CPU_IDLE_WAIT = y

    CONFIG_GENERIC_CALIBRATE_DELAY = y

    CONFIG_ARCH_HAS_CPU_RELAX = y

    CONFIG_ARCH_HAS_CACHE_LINE_SIZE = y

    CONFIG_HAVE_SETUP_PER_CPU_AREA = y

    CONFIG_ARCH_HIBERNATION_POSSIBLE = y

    CONFIG_ARCH_SUSPEND_POSSIBLE = y

    CONFIG_ARCH_POPULATES_NODE_MAP = y

    CONFIG_ARCH_SUPPORTS_AOUT = y

    CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING = y

    CONFIG_GENERIC_HARDIRQS = y

    CONFIG_GENERIC_IRQ_PROBE = y

    CONFIG_GENERIC_PENDING_IRQ = y

    CONFIG_X86_SMP = y

    CONFIG_X86_32_SMP = y

    CONFIG_X86_HT = y

    CONFIG_X86_BIOS_REBOOT = y

    CONFIG_X86_TRAMPOLINE = y

    CONFIG_KTIME_SCALAR = y

    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config".

    CONFIG_EXPERIMENTAL = y

    CONFIG_LOCK_KERNEL = y

    CONFIG_INIT_ENV_ARG_LIMIT = 32

    CONFIG_LOCALVERSION =""

    CONFIG_LOCALVERSION_AUTO = y

    CONFIG_SWAP = y

    CONFIG_SYSVIPC = y

    CONFIG_SYSVIPC_SYSCTL = y

    CONFIG_POSIX_MQUEUE = y

    CONFIG_IKCONFIG = y

    CONFIG_IKCONFIG_PROC = y

    CONFIG_LOG_BUF_SHIFT = 18

    CONFIG_HAVE_UNSTABLE_SCHED_CLOCK = y

    CONFIG_SYSFS_DEPRECATED = y

    CONFIG_SYSFS_DEPRECATED_V2 = y

    CONFIG_RELAY = y

    CONFIG_NAMESPACES = y

    CONFIG_BLK_DEV_INITRD = y

    CONFIG_INITRAMFS_SOURCE =""

    CONFIG_CC_OPTIMIZE_FOR_SIZE = y

    CONFIG_SYSCTL = y

    CONFIG_UID16 = y

    CONFIG_SYSCTL_SYSCALL = y

    CONFIG_SYSCTL_SYSCALL_CHECK = y

    CONFIG_KALLSYMS = y

    CONFIG_KALLSYMS_ALL = y

    CONFIG_HOTPLUG = y

    CONFIG_PRINTK = y

    CONFIG_BUG = y

    CONFIG_ELF_CORE = y

    CONFIG_PCSPKR_PLATFORM = y

    CONFIG_COMPAT_BRK = y

    CONFIG_BASE_FULL = y

    CONFIG_FUTEX = y

    CONFIG_ANON_INODES = y

    CONFIG_EPOLL = y

    CONFIG_SIGNALFD = y

    CONFIG_TIMERFD = y

    CONFIG_EVENTFD = y

    CONFIG_SHMEM = y

    CONFIG_VM_EVENT_COUNTERS = y

    CONFIG_SLUB_DEBUG = y

    CONFIG_SLUB = y

    CONFIG_HAVE_OPROFILE = y

    CONFIG_KPROBES = y

    CONFIG_KRETPROBES = y

    CONFIG_HAVE_KPROBES = y

    CONFIG_HAVE_KRETPROBES = y

    CONFIG_PROC_PAGE_MONITOR = y

    CONFIG_SLABINFO = y

    CONFIG_RT_MUTEXES = y

    CONFIG_BASE_SMALL = 0

    CONFIG_MODULES = y

    CONFIG_MODULE_UNLOAD = y

    CONFIG_MODULE_FORCE_UNLOAD = y

    CONFIG_KMOD = y

    CONFIG_STOP_MACHINE = y

    CONFIG_BLOCK = y

    CONFIG_LBD = y

    CONFIG_IOSCHED_NOOP = y

    CONFIG_IOSCHED_AS = y

    CONFIG_IOSCHED_DEADLINE = y

    CONFIG_IOSCHED_CFQ = y

    CONFIG_DEFAULT_CFQ = y

    CONFIG_DEFAULT_IOSCHED = "qfc.

    CONFIG_CLASSIC_RCU = y

    CONFIG_TICK_ONESHOT = y

    CONFIG_NO_HZ = y

    CONFIG_HIGH_RES_TIMERS = y

    CONFIG_GENERIC_CLOCKEVENTS_BUILD = y

    CONFIG_SMP = y

    CONFIG_X86_GENERICARCH = y

    CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER = y

    CONFIG_PARAVIRT_GUEST = y

    CONFIG_VMI = y

    CONFIG_PARAVIRT = y

    CONFIG_X86_CYCLONE_TIMER = y

    CONFIG_MPENTIUMIII = y

    CONFIG_X86_GENERIC = y

    CONFIG_X86_CPU = y

    CONFIG_X86_CMPXCHG = y

    CONFIG_X86_L1_CACHE_SHIFT = 7

    CONFIG_X86_XADD = y

    CONFIG_X86_WP_WORKS_OK = y

    CONFIG_X86_INVLPG = y

    CONFIG_X86_BSWAP = y

    CONFIG_X86_POPAD_OK = y

    CONFIG_X86_GOOD_APIC = y

    CONFIG_X86_INTEL_USERCOPY = y

    CONFIG_X86_USE_PPRO_CHECKSUM = y

    CONFIG_X86_TSC = y

    CONFIG_X86_CMOV = y

    CONFIG_X86_MINIMUM_CPU_FAMILY = 4

    CONFIG_X86_DEBUGCTLMSR = y

    CONFIG_DMI = y

    CONFIG_NR_CPUS = 8

    CONFIG_SCHED_SMT = y

    CONFIG_SCHED_MC = y

    CONFIG_PREEMPT_VOLUNTARY = y

    CONFIG_X86_LOCAL_APIC = y

    CONFIG_X86_IO_APIC = y

    CONFIG_X86_MCE = y

    CONFIG_X86_MCE_NONFATAL = y

    CONFIG_VM86 = y

    CONFIG_MICROCODE = y

    CONFIG_MICROCODE_OLD_INTERFACE = y

    CONFIG_X86_MSR = y

    CONFIG_X86_CPUID = y

    CONFIG_HIGHMEM4G = y

    CONFIG_PAGE_OFFSET = 0XC0000000

    CONFIG_HIGHMEM = y

    CONFIG_SELECT_MEMORY_MODEL = y

    CONFIG_FLATMEM_MANUAL = y

    CONFIG_FLATMEM = y

    CONFIG_FLAT_NODE_MEM_MAP = y

    CONFIG_PAGEFLAGS_EXTENDED = y

    CONFIG_SPLIT_PTLOCK_CPUS = 4

    CONFIG_RESOURCES_64BIT = y

    CONFIG_ZONE_DMA_FLAG = 1

    CONFIG_BOUNCE = y

    CONFIG_VIRT_TO_BUS = y

    CONFIG_MTRR = y

    CONFIG_IRQBALANCE = y

    CONFIG_SECCOMP = y

    CONFIG_HZ_100 = y

    CONFIG_HZ = 100

    CONFIG_SCHED_HRTICK = y

    CONFIG_PHYSICAL_START = 0 X 100000

    CONFIG_PHYSICAL_ALIGN = 0 X 100000

    CONFIG_HOTPLUG_CPU = y

    CONFIG_COMPAT_VDSO = y

    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG = y

    CONFIG_PM = y

    CONFIG_PM_SLEEP_SMP = y

    CONFIG_PM_SLEEP = y

    CONFIG_SUSPEND = y

    CONFIG_SUSPEND_FREEZER = y

    CONFIG_ACPI = y

    CONFIG_ACPI_SLEEP = y

    CONFIG_ACPI_PROCFS = y

    CONFIG_ACPI_PROCFS_POWER = y

    CONFIG_ACPI_SYSFS_POWER = y

    CONFIG_ACPI_PROC_EVENT = y

    CONFIG_ACPI_AC = y

    CONFIG_ACPI_BATTERY = y

    CONFIG_ACPI_BUTTON = y

    CONFIG_ACPI_FAN = y

    CONFIG_ACPI_DOCK = y

    CONFIG_ACPI_PROCESSOR = y

    CONFIG_ACPI_HOTPLUG_CPU = y

    CONFIG_ACPI_THERMAL = y

    CONFIG_ACPI_BLACKLIST_YEAR = 2001

    CONFIG_ACPI_DEBUG = y

    CONFIG_ACPI_EC = y

    CONFIG_ACPI_POWER = y

    CONFIG_ACPI_SYSTEM = y

    CONFIG_X86_PM_TIMER = y

    CONFIG_ACPI_CONTAINER = y

    CONFIG_CPU_FREQ = y

    CONFIG_CPU_FREQ_TABLE = y

    CONFIG_CPU_FREQ_DEBUG = y

    CONFIG_CPU_FREQ_STAT = y

    CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE = y

    CONFIG_CPU_FREQ_GOV_PERFORMANCE = y

    CONFIG_CPU_FREQ_GOV_USERSPACE = y

    CONFIG_CPU_FREQ_GOV_ONDEMAND = y

    CONFIG_CPU_FREQ_GOV_CONSERVATIVE = y

    CONFIG_X86_ACPI_CPUFREQ = y

    CONFIG_X86_POWERNOW_K8 = y

    CONFIG_X86_POWERNOW_K8_ACPI = y

    CONFIG_X86_ACPI_CPUFREQ_PROC_INTF = y

    CONFIG_CPU_IDLE = y

    CONFIG_CPU_IDLE_GOV_LADDER = y

    CONFIG_CPU_IDLE_GOV_MENU = y

    CONFIG_PCI = y

    CONFIG_PCI_GOANY = y

    CONFIG_PCI_BIOS = y

    CONFIG_PCI_DIRECT = y

    CONFIG_PCI_MMCONFIG = y

    CONFIG_PCI_DOMAINS = y

    CONFIG_ARCH_SUPPORTS_MSI = y

    CONFIG_PCI_MSI = y

    CONFIG_PCI_LEGACY = y

    CONFIG_ISA_DMA_API = y

    CONFIG_K8_NB = y

    CONFIG_BINFMT_ELF = y

    CONFIG_NET = y

    CONFIG_PACKET = y

    CONFIG_UNIX = y

    CONFIG_INET = y

    CONFIG_IP_MULTICAST = y

    CONFIG_IP_FIB_HASH = y

    CONFIG_IP_PNP = y

    CONFIG_IP_PNP_DHCP = y

    CONFIG_INET_DIAG = y

    CONFIG_INET_TCP_DIAG = y

    CONFIG_TCP_CONG_CUBIC = y

    CONFIG_DEFAULT_TCP_CONG = "cubic."

    CONFIG_UEVENT_HELPER_PATH = "/ sbin/hotplug.

    CONFIG_STANDALONE = y

    CONFIG_PREVENT_FIRMWARE_BUILD = y

    CONFIG_FW_LOADER = y

    CONFIG_PNP = y

    CONFIG_PNPACPI = y

    CONFIG_BLK_DEV = y

    CONFIG_BLK_DEV_FD = y

    CONFIG_BLK_DEV_LOOP = y

    CONFIG_BLK_DEV_RAM = y

    CONFIG_BLK_DEV_RAM_COUNT = 16

    CONFIG_BLK_DEV_RAM_SIZE = 4096

    CONFIG_HAVE_IDE = y

    CONFIG_IDE = y

    CONFIG_BLK_DEV_IDE = y

    CONFIG_BLK_DEV_IDEDISK = y

    CONFIG_IDEDISK_MULTI_MODE = y

    CONFIG_BLK_DEV_IDECD = y

    CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS = y

    CONFIG_BLK_DEV_IDEACPI = y

    CONFIG_IDE_PROC_FS = y

    CONFIG_IDE_GENERIC = y

    CONFIG_BLK_DEV_IDEDMA_SFF = y

    CONFIG_BLK_DEV_IDEPCI = y

    CONFIG_BLK_DEV_IDEDMA_PCI = y

    CONFIG_BLK_DEV_PIIX = y

    CONFIG_BLK_DEV_IDEDMA = y

    CONFIG_SCSI = y

    CONFIG_SCSI_DMA = y

    CONFIG_SCSI_NETLINK = y

    CONFIG_BLK_DEV_SD = y

    CONFIG_CHR_DEV_SG = y

    CONFIG_SCSI_WAIT_SCAN = m

    CONFIG_SCSI_SPI_ATTRS = y

    CONFIG_SCSI_FC_ATTRS = y

    CONFIG_SCSI_LOWLEVEL = y

    CONFIG_MD = y

    CONFIG_FUSION = y

    CONFIG_FUSION_SPI = y

    CONFIG_FUSION_MAX_SGE = 128

    CONFIG_NETDEVICES = y

    CONFIG_NETDEVICES_MULTIQUEUE = y

    CONFIG_NET_ETHERNET = y

    CONFIG_MII = y

    CONFIG_NETDEV_1000 = y

    CONFIG_E1000 = y

    CONFIG_NETCONSOLE = y

    CONFIG_NETPOLL = y

    CONFIG_NET_POLL_CONTROLLER = y

    CONFIG_INPUT = y

    CONFIG_INPUT_MOUSEDEV = y

    CONFIG_INPUT_MOUSEDEV_PSAUX = y

    CONFIG_INPUT_MOUSEDEV_SCREEN_X = 1024

    CONFIG_INPUT_MOUSEDEV_SCREEN_Y = 768

    CONFIG_INPUT_EVDEV = y

    CONFIG_INPUT_KEYBOARD = y

    CONFIG_KEYBOARD_ATKBD = y

    CONFIG_INPUT_MOUSE = y

    CONFIG_MOUSE_PS2 = y

    CONFIG_MOUSE_PS2_ALPS = y

    CONFIG_MOUSE_PS2_LOGIPS2PP = y

    CONFIG_MOUSE_PS2_SYNAPTICS = y

    CONFIG_MOUSE_PS2_LIFEBOOK = y

    CONFIG_MOUSE_PS2_TRACKPOINT = y

    CONFIG_SERIO = y

    CONFIG_SERIO_I8042 = y

    CONFIG_SERIO_LIBPS2 = y

    CONFIG_VT = y

    CONFIG_VT_CONSOLE = y

    CONFIG_HW_CONSOLE = y

    CONFIG_DEVKMEM = y

    CONFIG_SERIAL_8250 = y

    CONFIG_SERIAL_8250_CONSOLE = y

    CONFIG_FIX_EARLYCON_MEM = y

    CONFIG_SERIAL_8250_PCI = y

    CONFIG_SERIAL_8250_PNP = y

    CONFIG_SERIAL_8250_NR_UARTS = 4

    CONFIG_SERIAL_8250_RUNTIME_UARTS = 4

    CONFIG_SERIAL_CORE = y

    CONFIG_SERIAL_CORE_CONSOLE = y

    CONFIG_UNIX98_PTYS = y

    CONFIG_LEGACY_PTYS = y

    CONFIG_LEGACY_PTY_COUNT = 256

    CONFIG_HW_RANDOM = y

    CONFIG_RTC = y

    CONFIG_RAW_DRIVER = y

    CONFIG_MAX_RAW_DEVS = 256

    CONFIG_DEVPORT = y

    CONFIG_POWER_SUPPLY = y

    CONFIG_THERMAL = y

    CONFIG_SSB_POSSIBLE = y

    CONFIG_SSB = y

    CONFIG_SSB_SPROM = y

    CONFIG_SSB_PCIHOST_POSSIBLE = y

    CONFIG_SSB_PCIHOST = y

    CONFIG_SSB_DRIVER_PCICORE_POSSIBLE = y

    CONFIG_SSB_DRIVER_PCICORE = y

    CONFIG_DAB = y

    CONFIG_AGP = y

    CONFIG_AGP_AMD64 = y

    CONFIG_AGP_INTEL = y

    CONFIG_VGA_CONSOLE = y

    CONFIG_VGACON_SOFT_SCROLLBACK = y

    CONFIG_VGACON_SOFT_SCROLLBACK_SIZE = 128

    CONFIG_VIDEO_SELECT = y

    CONFIG_DUMMY_CONSOLE = y

    CONFIG_SOUND = y

    CONFIG_SOUND_PRIME = y

    CONFIG_HID_SUPPORT = y

    CONFIG_HID = y

    CONFIG_USB_HID = y

    CONFIG_USB_SUPPORT = y

    CONFIG_USB_ARCH_HAS_HCD = y

    CONFIG_USB_ARCH_HAS_OHCI = y

    CONFIG_USB_ARCH_HAS_EHCI = y

    CONFIG_USB = y

    CONFIG_USB_DEVICEFS = y

    CONFIG_USB_EHCI_HCD = y

    CONFIG_USB_OHCI_HCD = y

    CONFIG_USB_OHCI_LITTLE_ENDIAN = y

    CONFIG_USB_UHCI_HCD = y

    CONFIG_USB_STORAGE = y

    CONFIG_DMIID = y

    CONFIG_EXT2_FS = y

    CONFIG_EXT2_FS_XATTR = y

    CONFIG_EXT2_FS_POSIX_ACL = y

    CONFIG_EXT3_FS = y

    CONFIG_EXT3_FS_XATTR = y

    CONFIG_EXT3_FS_POSIX_ACL = y

    CONFIG_JBD = y

    CONFIG_FS_MBCACHE = y

    CONFIG_JFS_FS = y

    CONFIG_FS_POSIX_ACL = y

    CONFIG_DNOTIFY = y

    CONFIG_INOTIFY = y

    CONFIG_INOTIFY_USER = y

    CONFIG_AUTOFS4_FS = y

    CONFIG_GENERIC_ACL = y

    CONFIG_ISO9660_FS = y

    CONFIG_FAT_FS = y

    CONFIG_MSDOS_FS = y

    CONFIG_VFAT_FS = y

    CONFIG_FAT_DEFAULT_CODEPAGE = 437

    CONFIG_FAT_DEFAULT_IOCHARSET = "iso8859-1".

    CONFIG_PROC_FS = y

    CONFIG_PROC_KCORE = y

    CONFIG_PROC_SYSCTL = y

    CONFIG_SYSFS = y

    CONFIG_TMPFS = y

    CONFIG_TMPFS_POSIX_ACL = y

    CONFIG_HUGETLBFS = y

    CONFIG_HUGETLB_PAGE = y

    CONFIG_MSDOS_PARTITION = y

    CONFIG_NLS = y

    CONFIG_NLS_DEFAULT = "iso8859-1".

    CONFIG_NLS_CODEPAGE_437 = y

    CONFIG_NLS_ASCII = y

    CONFIG_NLS_ISO8859_1 = y

    CONFIG_NLS_ISO8859_15 = y

    CONFIG_NLS_UTF8 = y

    CONFIG_TRACE_IRQFLAGS_SUPPORT = y

    CONFIG_ENABLE_WARN_DEPRECATED = y

    CONFIG_FRAME_WARN = 1024

    CONFIG_MAGIC_SYSRQ = y

    CONFIG_UNUSED_SYMBOLS = y

    CONFIG_DEBUG_KERNEL = y

    CONFIG_DETECT_SOFTLOCKUP = y

    CONFIG_TIMER_STATS = y

    CONFIG_DEBUG_BUGVERBOSE = y

    CONFIG_HAVE_ARCH_KGDB = y

    CONFIG_EARLY_PRINTK = y

    CONFIG_DEBUG_STACKOVERFLOW = y

    CONFIG_X86_FIND_SMP_CONFIG = y

    CONFIG_X86_MPPARSE = y

    CONFIG_DOUBLEFAULT = y

    CONFIG_IO_DELAY_TYPE_0X80 = 0

    CONFIG_IO_DELAY_TYPE_0XED = 1

    CONFIG_IO_DELAY_TYPE_UDELAY = 2

    CONFIG_IO_DELAY_TYPE_NONE = 3

    CONFIG_IO_DELAY_0X80 = y

    CONFIG_DEFAULT_IO_DELAY_TYPE = 0

    CONFIG_CRYPTO = y

    CONFIG_CRYPTO_HW = y

    CONFIG_HAVE_KVM = y

    CONFIG_BITREVERSE = y

    CONFIG_GENERIC_FIND_FIRST_BIT = y

    CONFIG_GENERIC_FIND_NEXT_BIT = y

    CONFIG_CRC32 = y

    CONFIG_PLIST = y

    CONFIG_HAS_IOMEM = y

    CONFIG_HAS_IOPORT = y

    CONFIG_HAS_DMA = y

    Hi Nick,

    This is related to a core issue that we have identified a few days back.  I posted a patch to fix the problem on this thread.

    http://lkml.org/LKML/2009/2/6/339

    Can you or someone else see what you problem apply the patch from this link and see if that fixes the problem for you.

    This bug has been introduced in the about 2.6.25 kernel for every kernel 2.6.25 from time will be bad.

    Thank you

    Alok

  • PXI-5412 - discontinuities and dynamically modify the frequency with niFgen nodes of property

    I'm trying to find a way to eliminate discontinuities and change frequency/amplitude on the fly.  Is there a simple way to do this?

    Basically, my ultimate goal is as so:

    Table:

    Start Stop Freq Freq dt

    1                          100                     10

    100                      1000                   5

    1000-5000-10

    When you start at 1, then move to 100 after 10 seconds.  Then you would go from 100 to 1000 after 5 seconds.  And finally, you would go from 1000 to 5000 in 10 seconds.

    I use the niFgen Util creation frequency sweeping of data VI to create all the necessary frequencies.

    I use nodes of property niFgen to try to achieve.  I use a simple loop to move through a frequency table, and I update the frequency as follows:

    I have everything set up and works, the only problem is that I have large discontinuous jumps whenever the frequency gets really changed.  Unfortunately my oscilloscope are boring with the Print Screen function, so im trying to recreate using MS Paint:

    Clearly not the best artist ever, but you can get the general idea.  I get these discontinuities in the shape of V that are particularly sensitive to the peak of a wave.

    Someone at - it a good suggestion on how I should go about it?  I'll put in place the generation as follows:

    Looks like you are using the operating mode Standard to do this, correct?  The best way to go about this would be to use the frequency list mode, but the 5412 doesn't have this feature.  I have seen documentation that the use of property with Standard function nodes can definitely cause these kinds of discontinuities.  Another method is to use the arbitrary sequence mode, take a look at the niFgen "Arb Example.vi séquence" in the finder for example LabVIEW as a good reference on how to do this.

  • Deactivation and Activation on another computer

    I bought and downloaded then Internet Adobe Photoshop Elements 9.  So I bought a new computer.  How can I disable Adobe Photoshop Elements 9 on a computer and then activate the progam on another computer?

    Choose Help > deactivate on the first computer, and then uninstall the software.

    Install on the second computer. The software should operate automatically.

    See http://kb2.adobe.com/cps/100/1008779.html for more details.

  • Question to activate Adobe Acrobat 3D since internet and activation of the phone are no longer supported

    I have a problem to activate Adobe Acrobat 3D for internet and phone activation are more supported. Still getting the error code 5:12029

    Adobe cat was unable to help in this case.

    I am very grateful if someone could help it,

    Benno

    No one can help Adobe. Sometimes you get helpful people on the chat, but the message seems to be that way not supported, we will not enable same old software.

  • Silent installation and activation of the 50 copies of PhotoShop elements 12 TLP x

    I'm deploying licensed TLP of 50 users of PSE12 to 50 PCs without having to visit each PC, as was possible with previous versions.

    I have the installation in silent mode completed without error, but the product is not activated and has needed me to connect with one on each PC Adobe ID. Even once by the PC, it is not acceptable for a network installation.

    I also note that end users can disconnect from the Adobe ID so deactivatingthe software for all users of the computer, until I have revisit and sign in again. And no, we are not going to give users all Adobe ID credentials. Even before the events of the past week

    PSE12 Setup logs shows "there is no alternative files. Replace the value of substitution dir to be an empty string"- this is not find application.xml.override, even if the file is certainly available in the right places and is in UTF-8 format.

    (In addition, therefore, updates are not deleted.)

    My hunch is that the mechanism of application.xml.override was removed from PSE12 because of the new Adobe ID sign-in requirement?

    I am aware that AMEE is not request for the deployment of PSE.

    I would appreciate help on this.

    Concerning

    William

    Hi HMwkr,

    Please try the steps mentioned to serialize the items below:

    1 generate usng prov.xml the command:

    adobe_prtk.exe - tool = VolumeSerialize - generate - series => - leid = V7 {PhotoshopElements-EMT12-Win-GM - regsuppress = ss

    2 serialize using the command:

    adobe_prtk - tool = VolumeSerialize - provfile = 'absolute path to prov.xml.

    Please let us know if it worked.

    Kind regards

    Romit Sinha

  • Deactivation and activation serial number

    I run CS4 (US Version) in Germany on two Macs. Now, I want to replace a Mac and I installed CS4 on Mac new th. As CS4 was told that I have disabled a single installation of CS4. I tried to activate the new installation with the serial number of the Moose, but it did not work. May your compensation servers are no longer works for CS4? What can I do?

    Best, Klaus

    Contact support adobe technique: http://www.adobe.com/support/chat/ivrchat.html

    to reset your counter to activate after the double checking your disabled installation is disabled.  to check, click on help and confirm disable is grayed out.  If it's not click on it and then try activating your recent install.

  • General protection fault with tabs and toolbars to the output of the application

    Hello

    It seems that if you have a tab control

    .. .and that tab has a tab with a child Panel control

    .. .and this child Panel has a sign callback function

    .. .and this same child Panel also has a toolbar

    .. .and you do not throw the toolbar when the application closes

    .. .and you do not throw the child Panel when the application closes

    .. .and you do not throw the Panel with the tab control when the application closes

    .. .the application will crash with a general protection fault after the return of the main function.

    Certainly, I consider really cela a bug so as much as there were several things wrong with the code I was working with in order to hit it (and once I set the application everything is fine), but it still took me a little time to track down, so I hope this post can someone put some time in the future.

    I have attached a small sample application that illustrates this problem on my PC in the case where an engineer OR wants to take a peek.  I'm under CVI 2012 SP1 on Windows 7 64 bit.  Thank you.

    I see that I was a little involuted in my previous answer. At Telegraph and hopefully more clear:

    • As indicated in aid, after the chaining of the callback function to the Panel, Panel callbackData should not be modified
    • (solution 1) If you just install a reminder rather than chaining one new this problem is not present
    • I suspect that the instrument of the toolbar handles callbackData parameter Panel. If this is true, you can:
    • Install the toolbar to a panel that does not have a chained reminder (solution 1), or
    • Install the toolbar BEFORE chaining (solution 2) recall: as you can see in the code for ChainPanelCallback, the instrument takes care of callbackData existing and manage correctly in all situations, including the Panel throwing
  • 2D Array element 1 duplicate an int and the other Date and time for the output to a file

    Try to change the example labview Agilent 34401 acquire and graph - SW Triggered.vi

    to display the data in a file with a date/time stamp, display things in a file delimited by commas, it's very simple in PHP, C, C++, and I heard this thing of labview was great fast tool but I work on this simple mod for 5 hours now and still cannot get this to work.

    I have attached my example updated, but I can't seem to get this thing to convert the date and time to something that can go in the same array as the data...


  • Use of IE with Windows and active Internet the FMS server 8.1 requires a username / password

    When you use the copied link browser provided on the iOS (http://sandiskxxxxxx.local/files) application settings page I get a standard pop-up browser asking for a username and password.  What should I enter here?  Does not allow an anonymous connection.  I tried the usual stuff, Admin, the UID on my computer, the UID for my router admin, empty string, etc. With all the combinations of passwords, that I am entered for the WFD WPA2, the DDT from the admin of my router and my PC, etc. No luck.  Anyone else understand it?

    The user name is 'owner', if requested.

    If you have set a password in the security settings in the application, then the password is the password that you configured in the settings, otherwise there is no password.

  • Touch Pad deactivation and activation does not?

    Hi, I'm on Hp Pavilion dv5-2135dx Entertainment Notebook and the touchpad is not fuctioning properly. Usually when I double click on the upper left corner and lock the mouse mat. But now when I do it, it won't lock. The orange led glow and your still able to move the mouse. I think it's very annoying because when I play games, my hand to touch the mouse and it would move, ruin. Someone knows how to fix this? Thank you.

    Hello

    Assuming you are using Windows 7, try the following.

    First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50688.exe

    Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

    Once done, restart the laptop.

    When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

    Kind regards

    DP - K

Maybe you are looking for

  • Size of the text by e-mail to iOS 10

    Since the update to iOS 10, I find that the size of the text in emails in the format is so small that they are barely legible. And messages wrap always when I answer. Is there a way to set a font size minimum for the emails? Thank you

  • Applications minimization etc no longer appear in the dock

    When minimized applications or documents that they used to go to the dock on the right side of the "line of demarcation". In El Capitan by minimizing, they seem to disappear. Everyone has noticed this, or do I have to create a framework to achieve th

  • recovery mode is not available

    Here's the story. I want to improve my iMac. We have an iMac of 2007 running OS X 5.6.8 The disk drive is broken, because my 2yo stuffed too many drives inside and we do not have an external drive. I have a time machine to the top of my powerbook whi

  • What do the lights on the front of my NB-205?

    I know what means the plug icon (plugged into the wall). I know that the symbol of wifi: I am connected to wifi. I know what means the battery light, (although I don't know when it lights up). The rest of the lights are an enigma for me, however. Any

  • When I try to burn a DVD it say wait for pilot but it never happens

    Is there a way to tell if your burner is circled?