PXI-6527 digital i/o ports does not

Similar Questions

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• One of my usb ports does not work. A top forward on a MacPro 3.1

  So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?

  Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.

  Try a reset of the MSC...

  MacIntel: Reset of the controller (SMC) system management

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Tecra A11 - serial port does not

  I have a Tecra A11 running windows 7 Professional (32-bit).
  My serial port does not seem to work as I am no longer able to connect to the industrial PLC automation which requires the connection to the serial port for programming.

  Some of the software I use is a RSLinx, Easysoft and others.

  Any help on this will be greatly appreciated.

  Hello

  The serial port is properly recognized in Device Manager?
  Do you have signs of yellow exclamation point there?

  Try to remove the serial port of the Device Manager and reboot the machine to get this recognized again port.

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• HP 15-AF006AX: USB 2.0 port does not work

  Hello

  I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

  and I am not finding a driver for this, can you help me for this problem

  Thanks in advance

  Hello:

  The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

  You want the first file on the Web page.  Install and reboot the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry

• 802. 1 x authentication port does not

  I have trouble to know what is happening here. I'm trying to configure 802. 1 x port authentication based to assign customers to a VLAN. I inherited this mess and his for a long time I used it. I ran a wireshark on the radius of my server and I see no same package from my IP address switch when I plug into a port (I checked communication because pings come in my trace)

  Pass the info:

  SW-ConfB > sho worm

  Cisco IOS software, software of C2960C (C2960c405-UNIVERSALK9-M), Version 12.2 (55) EX3, VERSION of the SOFTWARE (fc2)

  Port config:

  interface FastEthernet0/11

  switchport mode access

  authentication event failure action allow vlan 900

  no response from the authentication event action allow vlan 900

  Auto control of the port of authentication

  dot1x EAP authenticator

  dot1x tx-period 5

  The RADIUS server info:

  key acct-port 1646 1645 auth-RADIUS-server host 10.0.1.52 port 802.1 x!

  A little confused why not package Radius comes even from the switch. Any tips?

  According to debug it, it seems that the supplicant connected on the switch port does not support the dot1x and MAB is not configured on the switchport so no method left to try and you got the vlan COMMENTS.

  3 Mar 04:37:47.963: % AUTHMGR-7-RESULT: authentication result 'no response' of 'dot1x' for the customer (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
  * 04:37:47.963 3 Mar: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
  * 04:37:47.963 3 Mar: AUTHMGR-7-NOMOREMETHODS %: exhausted all methods of authentication for the client

  At this point, the RADIUS is not even came into the picture. Please make sure that the end customer is configured correctly for the dot1x parameters.

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• HDMI port does not work

  Original title: HDMI port stopped working after the update.

  This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

  I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

  Update your BIOS can help you too.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

  Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

  • HDMI port does not when I connect the laptop to my led tv
  • In the windows operating system sleep mode is dissappers.
  • On the start menu, the language is Hindi

  There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

  Hello

  As mentioned above, restoring Windows 8 will allow:

  http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

  Good luck.