PXI-8186 is not to ping requests

Similar Questions

• Nested with 2 management cards workstation + ESXi5.5 = not to ping requests

  Hello community,

  I recently stumbled upon a bug (?) strange:

  I needed to install several 1331820 ESXi5.5 in my computer and noticed that the management interfaces are not to ping/accessible queries if more than one NETWORK adapter is used for the management network. As soon as I remove/disconnect ping NIC begins work and the server is accessible.

  Have not tested multiple ESX versions yet but Workstation 10/09/11 suffers from this.

  Yet several descriptions of this question, but not solutions. A suggested workaround has been upgrading manual driver interface NETWORK of E1000 vmxnet3 but nothing is in my case.

  Someone has any idea how to solve this problem?

  The cause was found to be using linked clones.

  I reinstalled all my guests individually and separately, do not use any cloning and they work like a charm.

• How to create an image of the hard drive on a PXI-8186

  I have a PXI-8186.  I want to make a backup copy of the current state of the hard disk of the controller.  Is there a way to do this?  I tried the Acronis software, but this controller may be to old for this.

  Another message similar to this is that one, but it has not helped with the 8186.

  http://forums.NI.com/NI/board/message?board.ID=270&message.ID=5656&requireLogin=false

  Thanks in advance.

  Mark L,

  Your PXI-8186 is Phonix Firstware software of imagery to controllers.  This software has a type of run-time license that allows the controller of our image re-imaging.  The development license is not supplied with the controller.

  To create a new image of your HARD drive, you will need to use a third party software like Norton Ghost or Acronis Disk Director.

  Kind regards

• How to install LabVIEW 7.0 on PXI-8186 RT

  I try to install LabVIEW 7.0 in real-time on a PXI-8186 controller.  It took a lot of time to go through the process, and it still does not, so I write this message in part to help and partly to document which does not work for later use.  The controller provided with Windows XP installed.  I created a bootable Windows 98 (of http://www.allbootdisks.com/download/98.html) floppy.  I plugged in an external USB drive on the PXI-8186 controller.  The hard drive would be recognized only when the BIOS setting specified startup in Windows / other OS.  I brought to the top of the BIOS setting screen by pressing the delete key several times after turning on the chassis (hold the DELETE key and turn on the chassis do not provide the BIOS settings.  In the BIOS setting, I went to the tab 'LabVIEW RT' and changed the "Startup Configuration:" to "Windows / other OS.

  I then started using the Windows 98 Startup disk and ran Fdisk

  Using fdisk, I deleted the existing partition and creates a new main back partition with the size of the complete volume.

  I then restarted the computer, once again starting with the Windows 98 Startup disk and formatted the C drive with the command "format C:".

  "When the format was finished, I used MAX Version 4.5.0f0 and some tools of-> RT Disk Utilities-> create PXI Format hard drive.

  I selected the Version 7.0 in the dropdown menu, complete the initialization of the disk without any problems and then used the resulting so that it starts the PXI chassis.

  PXI started with the message 'Transfer control user program.' followed by a 11 lines from "WARNING KERNEL.346530: error initializing floppy A:" followed by a prompt to re - format the C: drive.  I typed "Yes".

  Then the following message appears:

  Hard drive recovery to start in o/s real-time...

  WARNING KERNEL.346530: Error initializing floppy drive A:

  WARNING KERNEL.346530: Error initializing floppy drive A:

  Change the drive target C:\hdmon.bin for a start.

  Copy the host hdmon.bin target C:\hdmon.bin...

  Error: Could not open source file hdmon.bin

  Impossible to set up the hard drive boot sector.

  At this point, I can enter the BIOS and configure the computer to start in LabVIEW RT and I get the following message:

  "Could not load the LabVIEW RT of the player!

  Boot mode safe of Romans...

  Enter safe mode.

  The IP address is: 0.0.0.0

  At this point, I can connect it to the chassis of MAX and assign an IP address.  I can also install LabVIEW 8.6 real-time without problem.  However, I can't get LabVIEW 7.0 installed in real time.  It is clear to me if in time real LabVIEW 7.0 must be installed using a diskette or by software 'install' button in MAX.  If I try to use the button 'Install Software', the only version of real time available is "8.6".  When I do "PXI Format hard drive", I see an option "7.0" or a "8.6".  Also, I tried to connect it to the chassis with 2 other computers, which have all two LabVIEW 7.0 installed in real time.

  I saw an article in the knowledge base that says that LabVIEW 7.0 is supported on the PXI-8186 (http://digital.ni.com/public.nsf/allkb/B35E022CF91F6EF086256E68005FBC29) controller and another link which explains that an additional CD can be used to install the software (LabVIEW RT software does not exist on the Local host for PXI-8186 controller: http://digital.ni.com/public.nsf/websearch/4655C86B65AE7A7286256E620004834C?OpenDocument _)

  However, this knowledge base made from 24/03/2004 and I have not received any CD entitled "The LabVIEW Real-time Embedded Software CD.  I got a CD "embedded controller OR ', but it was not obvious to me how to use it.  He has an "I386" folder and a "BONE" record on this matter.

  Any help appreciated.

  After a Chase, the CD mentioned in the knowledge base has been found ("LabVIEW Real-time Embedded Software CD").  I put this CD on a computer that had at the time real LabVIEW 7.0 and Max Version 3.0.2 in it.  The Setup program ran, I installed LabVIEW 6.1 and 7.0 support and the installation tree showed that the support would be added for PXI-818 x controllers.  After running the program, I was able to install the software for the PXI-8186 and things worked as explained in the knowledge base.

  The CD mentioned also ran on my laptop, which has MAX version 4.5.0f0.  However, you are using the latest version of MAX, I don't have the ability to install LabVIEW 7.0 in real-time on the PXI-8186 controller since the button to install the software.  I looked briefly using MAX, but I could not know if it is a bug with the latest version of the Drivers of OR or a voluntary choice of National Instruments for support not time real LabVIEW 7.0 in newer versions.

• SCAN VIP - it is suitable for the ping requests before installing grid infrastructure?

  When the SCAN VIPs are configured in DNS, before the installation of the network infrastructure, should it be answering the ping requests or not?

  Hello
  The short answer is no.
  See more detailed information here:
  {message: id = 9914135}

  Handle: user8860934
  Messages total: 65
  Total Questions: 33 (31 pending)

  Please close your thread when you get your answer, it is considered a good practice here.

  Best regards
  Levi Pereira

• Why Apple may not send a request to have a camera out of their account, if it was purchased or given legaly but have no way to do it themselves

  MY father had bought an IPad of Gen 4 someone online, but the person had mentioned that they did not have the password there apple ID. My father who have never owned an apple product didn't know the problem and may not be able to implement the IPad to a new user because it was never erased before you receive the device. So my question is Apple support! Why not Apple on request, be able to send an email or message to a phone number connected to a device that is in question. To have the device one account if it has been bought or given away legaly or was not stolen. Or if they do not want the device that they are linked more?  In my case of dads because he has no idea who the original owner is and cannot contact this person must be another way by Apple to fix a problem that I suspect many people have which can be easily solved. also it can let others know if it got stolen, and what they can do to repair or compensate the owners for a device that does not can be used once more. It seems that Apple could help a lot of people!

  This topic has been discussed in depth on several discussions in this forum. You stated the problem clearly in your message. He bought an iPad "someone online" who "said" they didn't have the password to their Apple ID. How to know you as a person who sells your father the iPad wasn't lying not knowing the password? What happens if they didn't know the password because it wasn't their iPad, but rather an iPad that they stole from someone and then are turning a quick buck? What evidence do you have that the iPad is 'legitimate '. Locking Activation, means.

  Any legitimate owner of the Apple device will not tell you that they "don't remember" their password. Reset your password Apple ID is not hard to do. And anyone who sells an Apple device is likely to know about locking Activation, even if they sell the unsuspecting person to do not.

  Sorry, but your father was a victim of fraud. If the seller was legitimate, they picked up the iPad and refunded the money of your father.

  Your situation, depending on how you have described, is exactly the kind of thing that the lock of Activation has been put in place. Sorry if your father has been taken for a ride, but it seems that you should choose a BONE with the person your purchased the device from - not Apple or the blocking of the Activation technology.

  Good luck

  GB

• VNA is a pxi-compatible or not

  Hello

  I have a vna or and a no or pxi. I want to know if its compatible. and if yes what software can I use instead of max.

  Thanks in advance

  Shyam.

  PXI of NEITHER not equipped with a controller (aka computer) and the driver NOR ANS must be installed on this controller before installing the NI VNA.  You can download the driver NI VNA ni.com/drivers, and then type VNA in the search window.  As part of this pilot plant, MAX (configuration utility) will be installed on the controller as well.

• PXI-6682 do not appear on VISA (C++) but goes on MAX

  First of all, I am informed, the PXI-6682 does not use DAQmx calls on this thread:

  http://forums.NI.com/NI/board/message?board.ID=250&message.ID=53078#M53078

  Then I remembered that I needed visa for MAX to see this device.

  Then I tried visa and used a C++ code (in the example) (and replaced the regular expression with '? ') * »

  status = viFindRsrc (defaultRM, "?*INSTR", &findList, &numInstrs, instrDescriptor);
     if (status < VI_SUCCESS)
     {
        printf ("An error occurred while finding resources.\nHit enter to continue.");
        fflush(stdin);
        getchar();
        viClose (defaultRM);
        return status;
     }
  

  He returned to me this:

  PXI0::1:BACKPLANE
  ASRL1::INSTR
  ASRL2::INSTR

  Now what intrigues me, is... He would have to return something more PXI - ish as:

  PXI0::15:INSTR

  I think anyway...

  Now I also need a way to know if the device is the PXI-6682... look calls for a VISA, but if someone was an idea please let me know.

  Thank you

  SEB

  Hi Sebastian,.

  Open Measurement & Automation Explorer (MAX).  "Go to tools' NI-VISA ' VISA Options. Under PXI/PCI and FireWire Interfaces, select the "show all devices accessible to the VISA. Click on save and close MAX. Then close and reopen your ADE. That should allow you to see your PXI with the VISA resources find call of resources.

• 6520 inkjet printer all-in-one: printer does not obey orders requested

  When I try to change the printer from printing, for example a booklet to print a standard A4 size single sheet it does not obey the request, I have uninstalled and reinstalled the printer software and check the updates for software and drivers with no result.

  Anybopdy can help?

  Hi @Brisey,

  Welcome to the Forums of HP Support! I see you are having problems printing to A4 paper size. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to check the paper type and size settings of paper in the print driver, Printers HP Photosmart 6520 - Printing Documents (Windows).

  If you still encounter problems printing to A4 paper size, change the location settings on the computer to the default paper settings see if that will help.

  • Go to start, Control Panel, language and region.
  • Select the location tab, click the menu down and select the United States.
  • Then, click the Formats tab and click the menu down and select English (United States).

  Restart the computer.

  Again, check the paper size settings in the driver printing and the application you are printing from, go to file, Page Setup and select the correct paper size.

  You can also install a generic driver, if the problem persists.
  On the computer, go to start, devices and printers, select Add a printer. Follow the steps, select HP and Deskjet 9800 in the list. Set it as default printer.

  Please let me know the results and if there is anything else I can help you. Thank you.

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• True color has not applied the requested settings - Dell Inspiron 5547

  I bought Dell Inspiron 5547 last wee.

  Since day 1, I get error of "True color has not applied the requested settings" . Now running Windows 10 (upgrade of 2 days).

  Tried to update all the drivers. Is there anyone facing the same issue and got a fix?

  Thanks in advance!

  

  go to programs and features in windows 10, there you will find TrueColor application right click and press change, it will be to repair or reinstall the application. Even though I have upgraded to windows 10, true color works very well with me, yes sometimes it does, sometimes only. In windows update, you will get the update for graphics card intel it will be

  Intel Corporation - graphic adapter WDDM1.1, WDDM1.2, WDDM1.3, WDDM2.0 graphics card graphics card graphics card - Intel(r) HD Graphics Family

  just to update these things also, I remember seeing somewhere on the internet that intel could be the culprit for this problem.

  After that repair is TrueColor 99% chance that it work.otherwise uninstalls true color and redownload it from there

  

  Last thing, I would say, is dell people working on this issue itseems like they said to my friend who had the same problem when he called. wait patiently they release the fix.

  Answer to what's going on

• BitLocker: Could not complete the requested operation because of...

  Two days ago Windows 10 was running on my laptop. BitLocker has been on two disks (D and E). For some reason, I have formated Win 10 and do a new install of Windows 7 Ultimate. After installation, when I unlock the drive D, it works very well. But I can't unlock the E drive. When I enter the password, the message "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."
  I'm sure that the password is correct at 100%, but I do not have any file recovery. Can someone help me?

  Hi NooriSAN,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot unlock a drive locked by Bitlocker key and get error message: "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."

  This could be if defective media stored on database security, or a program in the security software error has caused corruption on disk.

  For reference I suggest you to return the items mentioned below.

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Overview of BitLocker Drive encryption

  What are the main issues for Bitlocker?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• warning machine is not in the requested State Hp probook 6550 b

  warning machine is not in the requested State Hp probook 6550 b

  See the following threads for a possible solution:

  Communities of HP - MACHINE caution IS NOT IN STATE ...
  Warning the machine is not in the requested State - Support HP - 850583 Forum