PXIe6556 - how to change the voltage of output during the generation?

I would like to know if it is possible to change the voltage output (data lines) during the generation?

1. start the generation - Vout = 1V

2. change of output voltage without stopping the generation of Vout = 1.2V

3. change of voltage output of...

TKS

Try searching for "Advanced: incarceration strategy property attribute ' and ' voltage levels: data voltage range property" in aid of generator/analyzer of signals for the digital waveform installed with your driver. This should allow you to change the levels of tension on the fly. To use this attribute, you must have the latest driver HSDIO (2.0).

Is that what you are looking for? It is an advanced attribute, and most of the use cases should not dictate it you have been warned. I hope this helps!

Tags: NI Hardware

Similar Questions

  • How to change the default value of MS Paint record - an output to jpg for shortcuts KEYBOARD: Alt-F-A (or S)?

    I've seen a lot of posts on this subject here, but they are all on the use of the mouse and I did not yet find one with an answer to MY specific dilemma.

    I take screenshots and edit photos (Nothing fancy) almost every day. Given that my physical disability in my arms causing me pain and discomfort when I use the mouse, I need to use several shortcuts as humanly possible help reduce the constant pain, I'm still in my right arm using the mouse.

    I *need* to know how to change the default hotkey Alt-F-A (or S) to save it as a JPG file relative to the current default value PNG which I use never, never. If it requires editing the registry, no problem, just point me in the right direction and guide me on how to do it.

    Thank you

    Lee

    LAST UPDATE 09/30/15 @ 16:54:

    The solution to my dilemma can be seen in my other thread (analogue/reprise). It is in case anyone in the future stumbles across this thread with the same problem and needs the answer.

    Since this thread will not be deleted, I would would add the link to the solution in case anyone stumbles across this in the future.

    See my other thread at: [Solution here]

  • How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

    How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

    How to change the format of a video that came off a cell phone. It was released the phone in 3GP format, it will play anything on my computer. It is a telecom xt

    =================================
    Media Player Classic should read the .3gp files...

    Media PLayer Classic
    http://download.CNET.com/Media-Player-Classic/3000-2139_4-10518778.html

    For conversion... the following freeware can be helpful to try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.pcfreetime.com/
    (FWIW... you can uncheck
    all the boxes on the last screen)

    After downloading and installing Format Factory...
    Open the program and choose an output folder...
    (this is where you will find your files when they are
    converted)

    Drag and drop your video clips on the
    main screen...

    Select "At?" / OK...
    (the? is the format of your choice)

    Click on... Beginning... in the toolbar...

    That should do it... John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Contact e-mail form formatting - how to change the layout of which is provided in the email?

    Hi I have adapted the contact form in a simple order form for a site I'm developing. It seems to work fine, until the message is through.  The formatting is all order and contains additional fields that I had deleted along the initial creation of the form.  I was wondering if it is possible, and how to change the layout of which comes through an email once a form is submitted.  Ideally I want to be able to change the order of the accident, delete absent field and in a perfect world out it in a kind of format, I could get into a spreadsheet (excel, .csv, delimited by commas, etc.).  Is this possible?  Is there something else that would make more sense if my goal is to output in a spreadsheet?  Thank you!!

    Hello

    Please take a look at this topic, it should give you a basic idea on how you can change

    Re: Changing 'new submission of form' text on receipt of e-mail of the contact form.

  • How to change the password for all users in the database

    Hi buddies!

    Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.

    Thank you.

    Nith

    Published by: user645399 on March 1, 2011 14:23

    Write the file spooling
    as

    Make sure that all profiles has password_verify_function with a NULL value

    then

    Select 'edit user' | username: ' identified by ;' from dba_users;

    you will get the output... you just run.

  • urgent! How to change the program simultaneous .out file naming rule

    I want to change the output to sysadmin. < request_id > name.
    where and how to make this change?
    Thanks in advance!

    Hi Tao;

    I want to change the output name in sysadmin. .

    Check it Please Note: how to change the output File Naming Convention [1034453.6 ID], I belive that you will find some answer in

    Respect of
    HELIOS

  • How to change the iPhone camera shutter sound 7

    How to change the iPhone camera shutter sound 7?

    Hello

    To adjust the volume of the sound of the camera shutter:

    • Use the settings ringer and alerts:
      • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
      • (Other models, go to settings > sounds).
    • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
      • (The mute function is disabled in some countries).
  • How to change the number of minutes for the exercise of the activity of the application

    How to change the number of minutes for the exercise of the activity of the application

    Hello

    It is not currently possible to change the goal of daily exercise.

    If you want to suggest that Apple consider adding this option, you can submit a request here:

    https://www.Apple.com/feedback/watch.html

  • Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

    Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

    Greetings jenniferfrom46,

    From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

    If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

    Have a good!

  • How to change the color of pre-rendered screen.

    My question is how to change the color of the page that is displayed before a site is fully charged. So let's say I go to a site where the background color is red. Before the end of Firefox loading it will appear as white. Also yes I have known that I have an add-on which changes the default color of YouTube. However the first picture comes on all websites no matter if their background is white or not.

    You can try the userChrome.css code or elegant.

    Add code to the file userChrome.css below default @namespace.

    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    
    browser {background-color:#f0f0f0!important}
    

    The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

    You can use this button to go to the current Firefox profile folder:

    • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
    • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
    • Paste the code in the userChrome.css file in the Editor window
    • Make sure that the userChrome.css file starts with the default @namespace line
    • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
      Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file
  • How to change the sequence of films in iMovie Theater

    By exporting iMovie projects in iMovie Theater, the sequence of films is determined by the time of download. How to change the sequence of films in iMovie Theater list?

    HI, breeaz,

    I have not found a way to change the sequence of films shown in the movie screen.

    If you access your movies in the Finder folder, then Ctrl-click on the folder of the theatre, you will find your movies to the poster

    in the alphabetical order in archival records.   I was not able to manually rearrange it.   They can be rearranged in some categories, through the view menu item at the top of the screen and the changes applied to the entire window, but it was not carrying at the display of iMovie.  In General, I'd like to make changes to the structure of iMovie in the finder.  It can cause serious problems.

    Best,

    Rich

  • It is difficult to see how to change the color of the scrollbar in gray on gray background?

    It is difficult to see how to change the color of the scrollbar in gray on gray background?

    I think you should probably use an extension or theme to replace the default colors.

    If you are not interested in all the changes that might come with a new theme, is the next extension compatible with Linux?

    https://addons.Mozilla.org/firefox/addon/noiascrollbars/

  • How to change the background of the playlist window colors in iTunes

    The background color of my playlist 'window' in iTunes is black, which is difficult to read.  How to change the background of all the playlists to a light color.

    All the indications are that the selected background colors are random and cannot be changed. If someone knows a way to change them please let us know.

  • How to change the color of the mailbox that contains new messages

    I have Thunderbird sort my incoming mail into different mailboxes based on different criteria.

    Until recently, the arrival of new messages in any box, the title of this box (in the list, the left pane) became Red - which makes it easy for me to identify what boxes necessary to my attention. For some reason, it stopped. The incremental number indicating the number of unread to messages always changes, but the color of title remains black.

    Someone knows how to change the behavior in order to highlight the mailboxes containing new messages please?

    Thank you...

    by using a theme? or a userchrome file?

  • How to change the url of sites in the new firefox tab page

    If we open newtab in firefox 9 tabs are visible. How to change the url address of the previously pinned tab.

    I found the solution for this problem.

    1. type Subject: config in firefox url and click Enter.

    2. an alert will be displayed when clicking on the button "I'll be careful, I promise!

    3. type browser.newtabpage.pinned in the text box and click on enter.

    4. right click and select the Edit option to change the URL.

    I want to change this URL
    [{"url": "http://localhost: 8080/Admin/login", "title": null},]

    After changing the URL in firefox
    [{"url": "http://localhost: 8080/Admin", "title": "Admin"},]

Maybe you are looking for

  • Why do want to download app for the Firefox browser

    When I try to download Firefox browser several times since the game of Google app store in my Virgin Mobile galaxy s Samsung 3, I get a message 'url download not valid'.

  • FORMER MODEL - need battery for T4600c

    Hello Please don't laugh, but I just get a T4600c portable steam-driven and I have no support. Can anyone tell if a battery is available for this archaeological wonder. It works fine off hand, but I really want to get your hands on a battery for it.

  • How do I close tabs on hp tablet on google chrome 7

    How do I close tabs on hp tablet on google chrome 7

  • No sound on my Satellite P100 with XP

    I spent from Vista to XP, and now I have no sound! I downloaded the Toshiba s Web site drivers, but I run the Setup and "Driver Installation Failed: could not find the MEDIA device for this driver" message appears... Can someone help me, please? I ca

  • HP g60: upgrade of the disk hard g60

    My hard drive has been corrupted and since im going to replace it, I wanted to update of 320 to 500 GB. I have a hp g60 laptop, one also can I just start from scratch by reinstalling Windows Vista from the old hard drive is broken, but I have my prod