[Q] NEO V: ROOTING AND INSTALLATION OF CWM WITH BOOTLOADER LOCKED TO 4.0.4

Similar Questions

• 1242 both as Root and no Root

  Hello world

  I'll put in pair of 1242 APs as root and Non-Root bridge, I'm not able to find the installation on the 1242 AP Mode when setting the root not for the best signal.

  any help will be appreciated.

  HM

  Hi HM,.

  As far as I KNOW, we have not INSATALL on the AP 1242 mode if we use it as ROOT and nonroot... This is only available on 1310 bridge or 1410 bridges... not on 1242AP...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• WinXP on Satellite A210-131 - modem and installation of SM bus controller

  Hi, I have a Toshiba Satellite A210 adapter - 131, which came with Windows Vista. I uninstalled and installed Win XP and SP2 and I have several problems in my device manager:

  I've got "Modem device on high definition audio bus" and "sm bus controller" with an exclamation mark. I have respected the order of installation instructions, I tried the modem drivers, even for different countries (the laptop was purchased in Germany, now I am in Romania). I started to install the modem driver, I have a progress bar that ends after a certain time, but after that nothing happens. I restarted and I get the same message! I've looked everywhere, I don't know what to do, please give some advice! And what of the sm bus controller? I also tried to uninstall some devices that appear after the modem in the list of instructions, and then try again with the modem but no result.
  Help, please!
  Thanks ;)

  Hi Paul

  Sorry, but it is not easy to give advice when the drivers of Windows XP Home for Satellite A210 aren't available yet.

  If the modem is not that important to leave you it until the drivers will be available. Who cares about modem? Can you live without it?

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista business is update, download and installation; even when the update is set to manual.

  I put the manual update manually. But despite this it keeps update, download and installation. Sometimes I turn off a few updates and suddenly, after a few hours, these unwanted updates begin to update! This is a joke, very annoying and the invasion of privacy!

  Could be group policy... .getting applied on your system... Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• After reformatting and installation, activation, I get a message that I don't have a valid copy of XP. Get errors from each Web site for certificate errors. Any ideas?

  Validation problem

  After reformatting and installation, activation, I get a message that I don't have a valid copy of XP.  Get errors from each Web site for certificate errors.  Any ideas?

  I think I found that the time and date on the pc was showing Jan of 2002.  Seems to be loading of updates now!  I hope that this will solve.

• KB2572073 security update is to repeatedly download and installation

  Hello
  KB2572073 security update is to repeatedly download and installation. When I check on Windows Update reports installed successfully. How can I fix it?

  Hello
  Thanks a lot for your answer. I followed the actions in the link provided, but the problem persisted. To fix it I had to remove the .NET Framework and then reinstall it by using the following procedure. That solved my problem.

  Thank you very much for your help.

  Step 1: Remove the .NET Framework using the removal tool

  ================================

  1. download the tool from the following link:

  http://CID-27e6a35d1a492af7.SkyDrive.live.com/self.aspx/Blog_Tools/dotnetfx_cleanup_tool.zip

  2. save the zip (dotnetfx_cleanup_tool.zip) file from the link above on the local desktop and extract it.

  3. double-click on cleanup_tool.exe to run the tool.

  4. follow the instructions given.

  In the "cleaning product:", please select ".NET Framework - all versions.

  5. click on 'clearing '.

  6. restart the computer.

  Note: Once we have removed the .NET Framework, some applications that have need of .NET Framework runtime database could lose their functions. It's just a temporary problem. The function will return to normal after the reinstallation of .NET Framework.

  After completing these steps, please go to the following suggestions to reinstall .NET Framework 1.1 and its updates.

  Step 2: Install the .NET Framework 1.1 and its updates

  ============================================

  Please download and install the following updates in the order.

  Microsoft .NET Framework Version 1.1 redistributable package

  http://download.Microsoft.com/download/a/a/c/aac39226-8825-44Ce-90E3-bf8203e74006/Dotnetfx.exe

  Microsoft .NET Framework 1.1 Service Pack 1

  http://download.Microsoft.com/download/8/b/4/8b4addd8-E957-4dea-BDB8-c4e00af5b94b/NDP1.1sp1-KB867460-x86.exe

  Security Update for Microsoft .NET Framework Service Pack 1 (KB2416447)

  http://download.Microsoft.com/download/6/D/C/6DC6FFA8-4585-4192-A366-85712491322D/NDP1.1sp1-KB2416447-x86.exe

  «Note: when the window "file download" appears, please click 'Save' and follow the directions to save the file to the desktop.» After downloading all the installation files, please double-click on each to install.

• Receive message and installation failure error code trying to update wireless driver

  Have tried to update the driver for my latitude d600, Dell wireless 1350 WLAN Mini-PCI Card from the website of dell and installation fails with the error 0xC0000135 code. After the second failure, (update the driver), I uninstalled the driver and reinstalled the driver to gain Dells web site. tried to update and cannot install the update again. The Mini-PCIcard could be defective or is - this software?

  Install .NET

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  MD MOEEN AJAZ KHAN - MCP, N +, A +.

• 5 updates are repeat time and time again the download and installation. How can I stop this?

  These 5 updates are repeating again and again after the download and installation. How can I stop this?
  Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2487367)
  Update of security for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2468871)
  Updated for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2533523)
  Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2600217) upwards
  Whenever the foregoing downloads and installs and updates installed successfully. Then a few minutes later he agains says ready to install updates and it's the same updates. Even after restarting my pc, updates moved again.
  Please, I'm desperate to stop it.

  Very well. Welcome & thank you for your comments.

• What is rooting and flashing

  can someone help me understand what is rooting and flashing phone mean?

  What are the advantages and disadvantages of it?

  and how can these be?

  Root is just access to the base of the system files

  Rooting is a process that gives the Super Administrator/user/permissions so that you can change any file inside your operating system Android

  Flashing is installed on a phone firmware

• Cannot install updates for WIndows - error 80070490 and installation disc?

  original title: error 80070490 and installation disc?

  Dell, Vista, x 64 laptop.

  I can not install updates, including Service Pack 2 and IE 8. I managed to fix the other error messages, but this one is a winner.

  I can't follow the steps here because I don't have an installation DVD. The laptop doesn't have a CD/DVD-ROM internal drive and did not come with a disc because everything was preinstalled. Even if I had a disc, my computer does not recognize the CD/DVD-ROM external drive when it is plugged in (a problem at a time!), so it would always help. "The System Update tool does not work on this machine, probably because of that pesky little" compatible operating systems: Windows Vista Service Pack 2 "requirement. I so need SP2 to download the tool which will allow my computer to install SP2? Nice little catch-22 there. I agree with the irony. I disagree with not being able to install updates at all, ever.

  Is it possible to re - install without a disk? Can I solve this problem at all or I'll have to take the laptop to Best Buy and ask them to do some voodoo Geek Squad to it?

  Hello

  Check if your computer has a recovery partition.
  If the computer has a recovery partition, use the recovery partition to restore the computer to factory settings.
  Note:   All programs and data will be lost.  You can make a backup of all important data and reinstall programs.

  You can also contact the manufacturer of your computer, and asking for a disc.

  Windows Update error 80070490
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Please note: you must have a disk for Installation of Windows Vista with Service Pack 1 integrated in to perform an upgrade to your computer, like your computer with Service Pack 1.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer. However, I suggest you to save all the important date of the computer before you perform the upgrade on the spot.

  Thank you

• Error7 message about the signature unidentified, the upgrade and installation of iTunes 10.5 for Windows Vista.

  Original title: error upgrading and installation of iTunes 10.5 for Windows 6.

  I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.

  All other methods I tried to correct the error includes:
  • Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
  • Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
  • Update the frame Microsot.NET as suggested by the Apple Support site.

  • Manually started the installation of such Windows program suggested by one of the answers on this site:

    a. click the Start button, and then type services.msc in the start search box and press ENTER.
    b. Locate the Windows Installer service.
    c. check that the status is started. If the condition column is empty,
    d. right-click on Windows Installer, and then select start.
    e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
    f. restart the computer.

    I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.

    Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).

    Thank you.

  Hi Junetyl,

  What is the complete error message you get?

  Method 1:

  You can see the article next to the Apple support and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  You can also consult the following article:

  iTunes for Windows: "Error 7" message when you open iTunes

  You can also try the following steps and check.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check if you can install iTunes.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also get in touch with Apple using Arthur support.

  Apple iTunes Support

  Hope this information is useful.

• Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different?

  Installation DVD of Windows Vista business and Windows Vista DVD installation, other than the company

  Are the installation DVD of Windows Vista Enterprise and installation DVD of Windows Vista other than company completely different? If so, how are they different?

  Hello

  This edition targets the enterprise of the market segment: it includes a superset of the Vista Business edition. Additional features include support for packets from the Interface user multilingual (MUI), BitLocker Drive Encryption, and UNIX application-support. Not available through retail or OEM, this edition channel sale will get distributed through Microsoft Software Assurance (SA). Since Vista Enterprise classes as a benefit of Microsoft Software Assurance, it includes several benefits HIS only, including a license allowing the execution of up to four virtual machines running a mixture of editions of Vista and the versions [13], access to Virtual PC Express and activation via the VLK. [14] Vista Enterprise supports up to two physical processors. [7] 64-bit Enterprise supports 128 GB of RAM

  Windows Vista Enterprise made salient

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Vista-Enterprise-highlights

  Compare Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/compare

• Question about the installation of XP with an OEM disc and using the number of CoA HP

  Hello

  I have a DC5100SFF that I bought refurbished last year, and it came not with all drives. It comes with windows XP pro and has the CoA sticker with the activation code.  It also has "HP" written on it.

  I thought to wipe the hard drive and reinstall XP Pro in the near future.  I have an an OEM Windows XP Pro disc, but it is not specific to HP. The CoA sticker has been removed from the new drive (and the package is not open), but there is nothing on the packaging to indicate what OEM brand (its likely it was another popular provider).

  My question is, if I install XP from this disc, he on my machine can use the number on the certificate of authenticity to activate it, or do I need to use a specific disc HP XP Pro?

  Thank you

  Hello:

  David is correct. You don't have the product key if you use recovery discs.

  However, I believe that you can still get the recovery disc for your Business from HP desktop PC.

  Just dial 1-800-334-5144 and inform the representative of customer services that you need a set of quick restore CD.

  You will need to provide the model number and serial number.

  A game costs $10.00.

  As for your other question... If someone has already used the product key XP pro on the sticker on your PC, you can use any disk XP Pro OEM installation and enter the product key.

  I do it all the time. I used OEM Dell on HP PC disks. Never had a problem.

  Paul

• cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  cannot update, uninstall or new installation of itunes and the programs associated with lack of msi files

  Hi kenau78,

  a. this problem during installation?

  b. you install an iTunes 32-bit version or 64-bit?

  c. What is the CPU architecture, 32-bit or 64-bit?

  I suggest you to contact the Apple support also, because the problem is with iTunes, from the link given below.

  http://www.Apple.com/support/

  You can also ask your question in the discussion forums Apple from the link below.

  http://discussions.Apple.com

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think