Q150 input voltage? Help, please

Similar Questions

• Tab 2 of the A10 input voltage?

  I wonder if tab 2 a10 should work abroad where the electricity voltage is 220 instead of 110.

  Any help would be appreciated. Thank you!

  You will be fine, that the C - P35 AC adapter is bitensión with 100-240V input voltage range

  Output 5.2V 2A.

• Using the DAQ USB-6009 meter and an analog input voltage at the same time.

  Hello

  Currently, I'm reading the two channels of voltage with the USB-6009. It happens that one of the channels is the output of a digital coder, and it would be much easier to use it directly to the PFIO entry that is defined as a counter. The problem I am facing right now, it's that I can't use the DAQ Assistant to use the analog voltage to a channel and the digital channel counter at the same time. Once I put the DAQ Assistant to read the input from analogue voltage, I won't be able to add analog inputs. And as I put the DAQ Assistant to use the PFIO as a counter, I can add more entries to read analog voltage is.

  I wonder if it is possible to solve this problem using the lower level data blocks? Another solution would be to read two channels in analog input voltage and that the use of Matlab to process data resulting from it, since I was not able to do the counting to work simultaneously with the acquisition in Labview to impulses.

  Hope you guys can help out me.

  Thanks in advance.

  Using a simple wizard of DAQ is incorrect. You need one to acquire analog inputs and one for the meter.

• Configure the input voltage range

  I use an NI USB-6221 with SignalExpress 3.0 card.

  The Spec for the 6221 map specifies 4 analog input ranges of +/-10V, 5, 1, & 0.2.

  My question, how is the range of input voltage on the map on one of the beaches specified?

  The closest thing I can find in SignalExpress is step 'DAQmx aquire', looking at the tab "configuration" of "Configuring the stage." There is a group called 'settings', there are areas of maximum and minimum input Signal, but context-sensitive help indicates that it is expected for the channel after the scaling values.

  I also looked into MAX, but I see no way for me to directly configure one of these ranges.

  Can someone explain how this works?

  Mike

  You look at the right thing. When you specify the min and max, the DAQmx driver and then automatically selects the best range of this signal. For example, the Council supports + /. 1 + /-1, at ± 5 and ± varies from 10 volts and a jury of 12 bits. If you enter max/min to + /-2, the jury will be set to the +/-5 volt range. Your resolution is then 10 (oscillation of the total voltage) volts divided by 4096 (2 * 12).

  If you were using LabVIEW, you can get the actual voltage selected range by using channel properties DAQmx AI. Rng.High and I. Rng.Low. If you specify a min and max that is less than the amplitude of the real signal is greater than the actual scale used, then you cut your input signal. DAQmx does not have an autoscale. Take a look at Page 4-2 in the Manual of the M series.

• recently installed xp pro but can't find driver for usb controller any help please model nx6325

  recently installed xp pro but can't find driver for usb controller any help please model nx6325

  Welcome to the HP Forum!

  edgeville wrote:

  recently installed xp pro but can't find driver for usb controller any help please model nx6325

  All the Windows drivers for your laptop are on Portal support business web users for your laptop HP. In the drop-down list, select Windows XP. It's an operating system supported so reinstall drivers.

  Check the Basic Input/Output System (BIOS) for Legacy USB Support. To do this, follow the procedures below:

  1. Restart the computer.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• How concat? Help, please

  Hi all
  
  I want to display enames on same line for deptno 10. Help, please
  
  SELECT ENAME FROM EMP WHERE DEPTNO = 10;
  
  
  Output voltage
  
  ENAME
  --------------------------
  CLARK, KING, MILLER

  Hello

  Use this...

  COLUMN employees FORMAT A50
  
  SELECT deptno, wm_concat(ename) AS employees
  FROM   emp where deptno=10
  GROUP BY deptno;
  
      DEPTNO EMPLOYEES
  ---------- --------------------------------------------------
          10 CLARK,KING,MILLER
  
   
  

  -------------------------------------------------------------------------------------
  There are many examples available here

  http://www.Oracle-base.com/articles/Misc/StringAggregationTechniques.php

  Thank you
  Prakash P

  Published by: prakash on October 6, 2011 22:03

• Update is not store data! Help, please!

  It's driving me crazy! I have a form of update that throws any errors on presentation, but stores no data either. I checked through my cfdump data fields are spent and in the correct data types. I am sure that the problem is in the primary key. It does not appear in my cfdump but I don't know that it should because it is a hidden field. It appears in my source code (which I don't understand since this kind of defeats the purpose to be hidden) so I think it's happened, but I still don't get any update. Help, please!

  Here is my form:

  < do action = "update_product.cfm" method = "post" > "

  < cfoutput query = "getProducts" >

  < input type = "hidden" name "ProductID" value = "" #ProductID # "/ >"

  < table >

  < b >

  < td width = "178" style = "width: 178px" > < table >

  < td width = "375" style = "width: 375px" > < table >

  < td width = "175" style = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > logo maker: < table >

  < td colspan = "2" style = "width: 375px" > < input name = "ManufacturerImage" type = "text" style = "" width: 230px "value =" #ManufacturerImage #"> < table >"

  < /tr >

  < b >

  < style td = "width: 178px" > manufacturer: < table >

  < style td = "width: 375px" > < input name = "Manufacturer" type = "text" style = "" width: 230px "value =" #Manufacturer #"> < table >"

  < style td = "" width: 105px "valign ="top"> < table >"

  < /tr >

  < b >

  < style td = "width: 178px" > product title: < table >

  < style td = "width: 375px" > < input name = "ProductTitle" type = "text" style = "" width: 230px "value =" #ProductTitle #"> < table >"

  < style td = "" width: 105px "valign ="top"> < table >"

  < /tr >

  < b >

  < style td = "width: 178px" > the product image: < table >

  < td colspan = "2" style = "width: 375px" > < input name = "ProductImage" type = "text" style = "" width: 230px "value =" #ProductImage #"> < table >"

  < /tr >

  < b >

  < style td = "" width: 178px "valign ="top"> product description: < table >"

  < td colspan = "2" rowspan = "3" valign = "top" > < textarea name = "ProductDescription" cols = "50" rows = "10" id = "ProductDescription" > #ProductDescription # < / textarea > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < /tr >

  < b >

  < style td = "" width: 178px "class = 'auto-style1' > Group catalogue: < table >"

  < style td = "" width: 375px "class = 'auto-style1' > < select name ="CatalogGroup"required ="Yes"message ="Please select a group of catalog">"

  < option selected = "selected" value = "#CatalogGroup #" > #Group # < / option > < / cfoutput >

  < cfoutput query = 'getGroups' >

  < option value = "#ID #" > #Group # < / option >

  < / cfoutput >

  < / select > < table >

  < style td = "" width: 105px ' class = "' auto-style1 > < table >"

  < /tr >

  < b >

  < style td = "" width: 178px "class = 'auto-style1' > species: < table >"

  < style td = "" width: 375px "class = 'auto-style1' > < cfoutput query ="getProducts"> < select name ="Species">"

  < option selected = "#Species #" > #Species # < / option >

  < option value = "Birds & poultry" > birds & poultry < / option >

  < option value = "Caged Bird" > Caged Bird < / option >

  < option value = "Canine" > Canine < / option >

  < option value = "Cattle" > cattle < / option >

  < option value = "Deer" > deer < / option >

  < option value = "Equine" > equine < / option >

  < option value = "Cat" > Feline < / option >

  < option value = "Fish" > fish < / option >

  < option value = "Goat" > goat < / option >

  < option value = "Llama and alpaca" > llama and alpaca < / option >

  < option value = "Rabbit" > rabbit < / option >

  < option value = "Sheep" > sheep < / option >

  < option value = "Swine" > swine < / option >

  < option value = "Wild birds" > wild birds < / option >

  < option value = ' Multi/All' > Multi/All < / option >

  < / select > < table >

  < style td = "" width: 105px ' class = "' auto-style1 > < table >"

  < /tr >

  < b >

  < td bgcolor = "##FFFFCC" style = "width: 178px" > product type < table >

  < td bgcolor = "##FFFFCC" style = "width: 375px" > < select name = "ProductType" required = "Yes" message = "Please select a product Type" >

  < option selected = "selected" value = "#ProductType #" > #ProductTypes_ProductType # < / option > < / cfoutput >

  < cfoutput query = "getProductType" >

  < option value = "#ID #" > #ProductType # < / option >

  < / cfoutput >

  < / select > < table >

  < td bgcolor = "#FFFFCC" style = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < style td = "width: 375px" > < table >

  < style td = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < td > < input type = "submit" value = "Update" > < table >

  < style td = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < style td = "width: 375px" > < table >

  < style td = "width: 105px" > < table >

  < /tr >

  < /table >

  < / make >

  Here's my action page:

  < cfdump var = "# FORM #" >

  <!--> update product data
  < cfif IsDefined "(FORM. ProductID") >

  < cfquery datasource = "farmky" name = "updProducts" >
  UPDATE products
  WHERE ProductID = #FORM. ProductID #.
  < / cfquery >

  < / cfif >

  < cflocation url = "products_master.cfm" >

  Guess what it was... a *' lack of equal sign;

  name "ProductID" value = "27" / >

  Watch this kind of stuff long enough and you can't see the obvious cause, you're too fixed on the search for the strange. Thanks for your help ilssac!

• After my 10 updated iOS even if I am connected to view the content I have cloud and iCloud when I try it asks me to put in place when already established sound upward. Help, please

  After the last update of iOS10. Even though I am connected to iCloud when I try to display the content he asks me to implement the iCloud. Can anyone help please.

  Try to perform a restart- restart your iPhone, iPad or iPod touch - Apple Support

• When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  When I started to update my iphone to ios 10 and watch 3.0, cannot already display the pictures of my watch. Logo of loading only. And he thinks it will take a hayss of 1000 years. Help, please

  Hello

  If the software on your watch is being updated, leave your watch and your iPhone until the process is complete (including the not remove your watch on the charger):

  Update the software on your Apple Watch - Apple Support

• Update Verizon iPhone 5 new IOS 10 problem: cannot receive/send calls. Shop Verizon says it's an update causing Apple to popular phones to crash all day. Any input or advice, please?

  Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?

  Don't you say no service at the top?

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Notes crashes in the Sierra. Help, please!

  After the upgrade on my iMac (mid-2014), I can't open the Notes. Crashes every time after I clicked through the tutorial on the new updates for Notes. Help, please! Thank you!

  Stop your restart the computer. Launch of Notes, but do not use the tutorial.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• I NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he try to put the itunes thing but

  NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he tried to put the itunes thing but it says enter password I put in what I rember, then said lokced for five minutes help me pls

  Without knowing the password for your iPhone, there is no way to unlock it, bring even you to the Genius Bar. If you continue to enter the wrong password, you will be locked out of your iPhone, and your data will be unaccessable.