Qosimio F10: Work does ' t Boot-CD/DVD!

Similar Questions

• Bluetooth doesn't work does not boot camp

  I can not connect any device to mbp via bluetooth. I use windows via boot camp 10. I also installed the boot camp support software.

  I also tried Windows 8.1, but the problem is the same.

  You can associate the same device correctly on the side of OS X?

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• Carpet * a DVD-RAM UJ - 841S does not recognize movie DVD on Satellite Pro A100

  I have a portable Satellite Pro A100-PSAAPE.

  Initially the played DVD movies very well, but now it does not recognize DVD movie at all.

  The drive itself is recognized and works very well with recovery DVD and CD-ROM.

  Phone support: they had me reinstall the driver and boot from the recovery DVD. This does not solve the problem. They then said to do a system restore. Tried, but it seems that the previous restorations of system are in themselves unsuccessful and the restoration of the system that has worked has not solved the problem.

  MediaPlayer and Intervideo WinDVD seem to work well, but do not find the DVD in the drive.

  They advise now reinstall me to factory setting, but don't want to build the laptop up to scratch etc, so I'm hoping that there may always be a solution.

  Can anyone help please?

  Thank you

  Best wishes

  idob

  Hello

  You understand that you must specify if it is a hardware or software problem.
  Unfortunately, you can find this secret only using recovery DVD (CD).
  Toshiba recovery installation will define the laptop back to the factory settings. In this case you may find whether or not the CD/DVD device is defective.

  If the player will not play the DVD after the reinstallation of the operating system, then chances are that it is a CD/DVD drive error.

  Good bye

• Satellite 1805-S204 - does not start a DVD

  Hi all
  I try to install Fedora 10 on my laptop, but it does not start on a dvd, it works from a cd but not dvd. Can I do to make it boot from dvd?

  Thank you

  Hello!

  First a question: have you checked if this oldie has a DVD player?
  I doubt that this then perhaps that this laptop has only a CD drive.
  Check it!

  If the laptop is a DVD player it of also possible to boot from the DVD.

  Good bye

• DVGW/hd ts-l802a does not see any DVD/CD

  first DVD worked fine, but when I read the second DVD, it's a ticking hard sound.
  end now, he does not see any DVD/CD / audio CD.

  Is there someone who has / have had this same problem or is there someone who can help me with this problem?

  Hello!

  You must give us a little more information such as your laptop model and the OS.

  However, maybe it could be useful for you:
  http://support.Microsoft.com/kb/314060

  You can boot from a CD like Linux boot disk?

  Good bye

• H8XT does not start a DVD player

  I recently bought a H8XT and I want to do a clean install of windows 7.  The DVD drive seems to work very well and I used it to create the recovery discs already.  However, when I try to boot from the DVD drive, the boot in the bios menu does not show the DVD player.  I t shows a generic drive called "ATAPI CD/DVD Drive.  Even when I try to choose that it does not start on the DVD, it always starts on the hard drive.  I have this research group and found a position with a similar problem to mine.  Here it is:

  http://h30434.www3.HP.com/T5/desktop-operating-systems/computer-won-t-boot-to-install-Windows-7-full...

  The solution for this post was to clear the CMOS.  However, my motherboard is not exactly like the one shown in this post, and I can't figure out how to clear the CMOS memory.  In the 'Clear the CMOS' link in figure 4, it shows 2 jumpers on the right side of the 6-pin.   In my system, 2 riders are on the left side 6 pins.  Any help would be appreciated.  Thank you.

  Thanks for the suggestions.   It turns out that when I burned an image of windows 7 on DVD, it does not burn properly and is not bootable.

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can't boot from DVD or USB! Windows 8

  It then it really starts to bug me! I tried to solve this problem for a few hours now, and this is absolutely not the case! So I want to do a clean install of Windows 8. I did all the steps to get it on a dvd and a bootable USB.  That was the easy part.  At first I tried to boot into DVD, I went to the Bios and the value of the first boot priority CD/DVD. After that and several reboots I get nothing! I went into F12 and it said to start from the hard drive. Good if it does not work. I go to copy the Windows 8 ISO on a USB key. Good in fact, it was easy, I can go into the Bios again and don't see an option for USB FLASH directly, but see other options start USB, such as USB, FLOPPY USB, DVD, AND USB HARD DRIVE. I first select USB DVD, after several reboot nothing! Went to F12 (boot options) and still nothing! Then, I chose USB HARD DRIVE, exactly the same thing! So now I am on my knees and gave up! I ask for help in my community and I hope that you guys can understand this.

  I just bought the computer 3 weeks ago its a new Aurora R4. I don't know whether it is a hardware problem, it seems. I tried to boot from the CD/DVD with the re - install OS AlienWare gave me and it read perfectly. So if it fills up it should work right? Then I tried several blank DVDs and even went out and bought some new! Still nothing! Ahhh, sorry it's really bugging me. Something so simple, but I'm so lost.

  Thanks for any help from friends!

  Dave, :)

  Press f2 to enter setup, disable the option "password at startup" and to record changes... now boot... you're done. Thank you

• iMovie does not open Costco DVD VHS movies converted

  iMovie for Mac does not open Costco DVD converts VHS movies at home. I don't know that I was able to do what a few years with an older version of iMovie. There is a limitation with iMovie? DVD of Costco is just a bunch of old family VHS home movies.

  iMovie, current or previous version, is not about DVD, which is a way for the end user.   iDVD is the application designed to work with the DVD, and there are several other design programs that do the same.  However, you can play your DVD on your computer or on a DVD player.

  To get your DVD movies to work with iMovie, you can open the content of the packaging of the DVD to reveal the VOB (video object) files and convert them to a format compatible with iMovie, such as MP4.  In recent years, I did, but I think that you insert the DVD into the disc drive of your computer and then right click on the DVD icon that appears on your desktop to reveal the VOB files you can drag - copy on your desktop.  There are conversion programs videacute, like the free download Handbrake, which can then convert VOB files.    Someone who has done more recently can weigh in here with more information.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Equium A60: Does not burn the DVD?

  Hi all

  Ive had my phone for almost a year now and for some reason any dvd drive does not burn the DVD, it burns cd perfectly but when it comes to bruning DVD it says that nothing is in the drive...

  Ive tried Philips DVD + RW and DVD + R Sony but still no luck, I know that for some DVDs, you must first delete it, but the drive is not even delete them... On the drive, his engraver of DVD multi and the rewritable clearly marked... so am confused at why his does not work... Ive also tried to use Nero to burn DVDs but no luck

  Any help appreciated thanks

  Ammunition

  Hello

  What s on DVD-R and DVD - RW?
  I also suggest trying different brands of DVD.
  Generally, you will find a list of DVDs and CDs, tested and compatible media in the user manual. Check it out.

• XP does not support burning DVDs or need for resettlement?

  The combo CD-RW/DVD-ROM drive in my work more former Windows computer has failed. I replaced it with a DVD +/-RW recovered on a newer computer broken. The computer came with Windows 98SE (I said it was my most old), but I had it installed the player that can only play DVD's before the upgrade to XP.

  I thought the Hardware Wizard to detect the new drive looked like XP it can now burn DVDs, but everything concerning the integrated burning guard speaks "copy to CD" or "burn CD" and encouraging me to "insert a blank CD.

  Not XP SP3 doesn't support data DVD burning using built-in tools, or should I reinstall or repair XP to recognize that the only CD burner has been replaced by a DVD burner? It would be easier to find just a 3rd party free tools. I didn't break anything to use as I got a burner that has been integrated into another computer (breath capacitors on the motherboard) burner who gave to a recycling center after having been stripped of useful things like a hard drive replacement, and a 56K modem/fax on a map. (the modem may not be useful nowadays, but fax is).

  I'm afraid that "native" DVD burning was introduced not to Windows until Vista. XP does not support native DVD burning. However, you can use 3rd party burning software. Most "retail" burn the material will be delivered with a CD offering a 'lite version' of such software, for example Nero.

  There are also freebies autour. Many on this forum recommend imgburn

  http://www.ImgBurn.com/

  (I have no experience of this product on which to base a personal recommendation)

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• My PC does not detect my DVD ROM or DVD - RW

  My PC does not detect my DVD player or my DVD - RW on pc.  This happened only since I reinstalled XP Home Edition.  I can't watch the discs, play music, or load any software on the system.  I tried Microsoft Fixit and even remove the material in my device manager, but it simply reinstalls the driver for a hard drive, but it does not work.

  Hello

  There will be a problem with your version of xp. If you know that the xp version is ok then downlad new drivers from the net to your PC/LAPTOP and it works perfectly.