Qosimo 10-124 display startup Bug

Similar Questions

• Windows vista home premium displayed "startup initialization failed" recovery/repair could not fix

  Gateway Laptop preloaded vista home premium displayed "startup initialization failed" launched the recovery/repair utility and was not able to repair.  now when you start the computer it will launch recover through process then the screen from windows with dots streaming on bottom is gets.   matter of fact that the screen is still and only way to stop it is to unplug the power.  a recommendations there...?  friends computer so HELP!

  E-mail address is removed from the privacy *.

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• Qosimo F25 freezes on startup screen...?

  Help!

  My brand new Qosimo F25 (OK dad bought in the United States for me) freezes on the screen (the one with the small blus of the bars of progression from left to right) Windows startup. It worked yesterday and I used it OK, but today it will not go beyond this page. Sarts in safemode, OK? In the start screen noticed time had shifted before 9hrs? Did a system restore to yesterday. Still no luck.

  Clues. Thank you

  Hello Holly ;)

  Well, it s strange. You upgrade the memory module or you plug in external devices on your device? It would be very interesting to know, if you see exclamation points in Device Manager.
  Please give me a feedback.

  Good bye

• Applications Windows XP Startup - Bug: the .exe file name only, not the full path

  Using Windows XP, run-msconfig-startup online online, only the name of the Executive file of the Applications that load and boot at startup are shown - this name sometimes not easily indicates he belongs as to which Application.
  Therefore, it becomes difficult to decide to uncheck (stop autoloading at startup) or not - unless the full path to its location is revealed. But this small window no poster not the full path - even if the mouse pointer is hovered over an entry in the list of applications.
  Third-party software (AnVir Task Manager Free) displayed the full path when the mouse pointer is moved to an entry.
  Microsoft should take the queue and improve this Service / installation / functionality, please.

  On my Windows XP, there is a 'Command' column / window for the start of the tab that displays the full path to the file.  If this column is not wide enough to show the entire path, place your cursor on the line that separates the column header in order for the column heading 'Image '.  The cursor turns into a line with arrows pointing to the left and right upright.  Click and hold the mouse button down and drag to the right.  The column will expand and a horizontal lift will open down to scroll all right.

  If this does not satisfy your needs, try the more technical version of msconfig Microsoft-"Autoruns".
  Autoruns:< http: technet.microsoft.com/en-us/sysinternals/bb963902="">
  HTH,
  -JW

• Impossible to change the display name - Bug?

  For the last few weeks, I was able to change my display name. I currently have an invisible name. When I try to click where my name would be to change it, there is nothing there to click. It's for Skype Desktop, I tried on the Skype web and mobile application to change my name, but nothing works.

  Any help is appreciated.

  See you soon

  HS

  Hello

  You can modify you profile - first name and last name that make up your display name in the customers - in my account. Simply log in with your credentials of Skype and go to "Edit profile." Here's a guide: https://support.skype.com/en/faq/FA12314/how-do-i-update-my-skype-profile-information

• Display list bug tile

  I have a component of DataList.  When I select the item "List item repeating" inside the properties panel gives me the options to choose the tile layout and add horizontal and vertical spacing.  When I put these, the screen properly updated to reflect the changes, but, when I return to the DataList control, in the region of the main 'scene', the list restores a vertical arrangement. It displays also in a vertical list when I run the project.

  The first image is the repeated list selected item.  Note it displays correctly.

  The second image is in the region of the main stage.  Note This is not.

  The third image is in the browser.  Note This is not.

  

  

  

  Thanks for the file, Ross.

  Maybe it's not the same problem that you are experiencing, but I noticed that repeated provision of the item is saved must they (so the disabled state is on tiled floor, but the Normal State is the Vertical value).  This would explain why the vertical arrangement appears when you left edit in place (because the normal state, it's what you see).

  This seems like a potential problem of conviviality that could cause confusion, so let's look at the question.

• Display PDF bug?

  Hello

  I noticed that the title bar in app View PDF does not disappear when I select 'Find' in the menu.

  So basically my search entry is hidden by the bar, the up/down arrows are also hidden by the bar...

  Is anyone else able to reproduce this on their Pre?

  photo attached.

  

  -Henry

  Yes. They know about it. Guess that they did not have a fix for 1.3.5. Original post on it here.

  http://forums.Palm.com/Palm/board/message?board.ID=webossoftware&thread.ID=9697

• Windows host process Rundll32 has stopped working ONLY at startup on the desktop.

  When I start my Dell Inspiron 531 after that sign in the screen will Dim twice for a few seconds then the Windows host process Rundll32 has stopped working window appears. If you close another small window exactly the same error message mentioned above tells you that Windows will look for a solution but NEVER done. I use AOL version 9.0, I can sign and the big surf for dial-up access. I tried to download free Kaspersky on their site and an error message said it was incomplete or corrupted. I have Windows Security Essentials, Stopzilla, CCleaner, Glary Utilities, you run sfc/scannow, it cleaned up a few files and he tells me that he has no integrity problem after 4 scans. The big short PC but what the _ is causing this Rundll32 error and why is there NO information specific on how to solve this problem? Also Internet Explorer cascades tiles and diverts the PC sometimes force a quick stop, it's really weird to see, very rare but happens. Systerac Fix of Windows crashes after starting an analysis on current user files, really strange, as if something is trying to stop him on purpose. I wish that Microsoft would really worry about the Rundll32 error of work ceased and tell us customers how to fix this shit it is very boring I'll tell you. I want that my host process Rundll32 to work as it did for the past 2 years with no error message at startup. He never gives me these messages while I use the Internet. There are many pages of misinformation out there, can some Microsoft Engineer please give me that a definitive answer in particular to the Windows host process Rundll32 has ceased to function the error at startup ONLY and tell me how to fix Rundll32 file or the process, it would be greatly appreciated? Thank you. Woman

  Hello

  Be careful of having too many programs antivirus/security on the computer running much less
  at the same time. Have a single load at the same time as even the remains of one can cause a lot
  problems.

  ------------------------------------------------------

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG, then post a list
  of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Startup Type
  (Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BCCode: 124 on a new generation of system, please help! __

  I have a new generation system, and keep getting a bbc that I fight for the difficulty and I am in desperate need of assistance.  Thanks in advance for any help that you can provide to fix this problem.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000000
  BCP2: 864C78FC
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091410-17640-01.dmp
  C:\Users\Marshall\AppData\Local\Temp\WER-31734-0.SysData.XML

  Read our privacy statement online:
  Privacy statement for Windows 7 - Microsoft Windows

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ==================================================
  Dump file: 091410-17640 - 01.dmp
  Crash time: 2010-09-14 23:32:29
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 0x00000000
  Parameter 2: 0x864c78fc
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 322493
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16617 (win7_gdr.100618 - 1621)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091410-17640-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ==================================================

  ==================================================
  Dump file: 091410-18703 - 01.dmp
  Crash time: 2010-09-14 23:25:48
  Bug Check String:
  Bug check code: 0 x 00000124
  Parameter 1: 0x00000000
  Parameter 2: 0x85afc8fc
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 322493
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16617 (win7_gdr.100618 - 1621)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091410-18703-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ==================================================

  ==================================================
  Dump file: 27187 091110 - 01.dmp
  Crash time: 2010-09-11 17:21:14
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check Code: 0 x 00000050
  Parameter 1: 0xffffff8b
  Parameter 2: 0x00000001
  Parameter 3: 0x92a956d5
  Parameter 4: 0x00000000
  Caused by the driver: tcpip.sys
  Caused by the address: tcpip.sys + f9438
  Description of the file: TCP/IP Driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\091110-27187-01.dmp
  Number of processors: 3
  Main version: 15
  Minor Version: 7600
  ===============================================

  I use a triple-core processor AMD Athlon II 440, MSI NF750-G55 mainboard, Corsair xms 2 gig memory, Hitachi Desktar 1 TB disk sata hard.

  Once again, thank you for your help in advance.

  You have a fatal hardware problem :

  Bug Check 0 x 124: WHEA_UNCORRECTABLE_ERROR - This bug check indicates that a fatal hardware error occurred.

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can look at landfills.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  André,

  Thanks for your reply, but I think that I have fixed my problem.  When I built the system, I never could the 2nd strip of memory to work.  It would not just start my system at all.  I thought all along that I had a problem of memory based on my last sentence.  I finally went out and bought another brand memory and did not have a BSOD on the last 2 days.

  Thanks again for trying to help me.

• Startup is too long to complete__

  I am running Vista SP1, and it takes very long time to start.  Any suggestions?

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• First Pro it's open, not displaying does not project.

  It is first arrived a few weeks ago, it's my computer, desktop computer for Mac and I need work so I can continue my work which I am now! : L (yes I tried a reinstall)

  Late Friday afternoon, always using Prime Minister, working with some changes, all right. Leave for the weekend, come back Monday morning and what is happening to the problem began where it appears Prime Minister is open, but it shows just my office. I could not operate and to reading the forums, it seems that the best thing to do would be to uninstall, I got a delay until Monday so I tried to uninstall and reinstall as soon as possible, anyway in the reinstall that I found myself with Prime CC instead, with a maturity of , I just treated and used my 30 day trial of CC who has opened and been used up to this point.

  However I / my boss won't spend more money when we already bought a (used to work well) piece of software, so now that the trial is over and I found a download link to the first CS6, found our license and reinstalled yesterday. I was happy to see it installed correctly and then I opened it, and the same problem. It enforcement with the purple splash screen normal then asked me if I wanted to open a project or create a new one, and then all that happens is the bar at the top of the screen and it shows me that the Prime Minister is open, and nothing, nothing more.

  It shows just my desktop MAC empty but the premier pro bar is at the top with file Edition... Window etc and these buttons are accessible I tried to use "Window, workspace reset" for example but he did not have any visible change, it's almost as if it happens off screen somewhere but I can't access the window of Prime Minister and is not anther monitor connected. It's the only program that does this, example I just used Photoshop Cs6 to paint some documents on the following image.

  Please find a few images and attached gifs that should help to better explain.

  

  Gif display startup https://i.gyazo.com/588b5a180f1e589aa09ee94373155e0f.gif

  GIF showing the screen of function open project... Gyazo - ce58df84eda8b19813b806a2514dec76.gif

  GIF showing the possibility of opening another Premier windows, but not the project/timeline! : https://i.gyazo.com/36b50b660118fd2d68873954c60a93f0.gif

  If anyone has a solution to this please let me know, thank you for taking the time to read this.

  Hi Cahir,

  It seems to occur because of corrupted preferences.

  Try the following steps:

  1. close all Adobe applications running from the activity monitor.

  2. go in "~/Library/Application Support and rename the folder 'Adobe' to 'Old.Adobe'."

  3. go to ' ~/Library/Preferences and rename the folder 'Adobe' to 'Old.Adobe '.

  4. go to Documents and rename the folder 'Adobe' to 'Old.Adobe '.

  Check if it works after that.

  Kind regards

  Navdeep Pandey

• My new office seems to stop unexpectedly with the details below:-J' thought it was the mouse as he goes a little wobbly, just before that happens. Not sure if the wireless router causes. Help, please!

  ·        Signature of the problem:

  ·        Problem event name: BlueScreen

  ·        OS version: 6.1.7600.2.0.0.768.3

  ·        Locale ID: 2057

  ·        More information about the problem:

  ·        BCCode: 124

  ·        BCP1: 0000000000000000

  ·        BCP2: FFFFFA8005BB6028

  ·        BCP3: 00000000F2000040

  ·        BCP4: 0000000000000800

  ·        OS version: 6_1_7600

  ·        Service Pack: 0_0

  ·        Product: 768_1

  Hello

  Have you added new hardware internally to the new machine?

  He is on a new machine and a serious hardware error, you should contact the seller and the
  The system immediately for repair or replacement manufacturer's support.

  No software or the Windows version will normally fix this error as it is the material. It is '' possible. ''
  This could be caused by the display and video drivers.

  Of MSDN BCCode: 124 0 x 00000124

  Bug Check 0 x 124: WHEA_UNCORRECTABLE_ERROR

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug check
  indicates that a fatal hardware error occurred. This bug check uses the error data
  which was provided by the Hardware Error Architecture WHEA (Windows).

  -----------------------------------

  There may be more information by using these controls, but this is rarely repaired by the user and on a
  new machine do more you more they will say it was something you did caused
  the question.

  It is an excellent tool for displaying the blue screen error information

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• no error code

  Mouse / typing delays... the cursor disappears and does not recognize typing me, the mouse disappears and does not appear for 2 or 3 seconds.

  I tried to solve this problem for several months and I have to to get a slegehammer. I am enough fan of computer and have tried all the common fixes listed on other sites to support (start anti-virus, selective, driver updates, etc.

  I have vista for almost two years and this problem just started happening about six months ago. I notice in all applications, online, MS outlook, word, etc., gaming, basically any time the computer is turned on.

  My computer is a desktop, 64-bit, 8 GB RAM, amd quad core 2.5 ghz, 1 GB ddr3 nvidia gts 250 processor. Personally, I think that it is a MS application because the problem still happens on selective startup, with all active MS services. I don't know who it is.

  If anyone can help, it would be LARGELY APPRECIATED! I'll go crazy if it is not fixed quickly.

  Hello

  Here is the usual bugs, but have you tried a USB mouse? Maybe the PS/2 port has problems - or if you are using a USB
  maybe try another or a hook for the PS/2 port, if you have a. BTW, other drivers can affect the rodent
  performance as can the BIOS and chipset drivers.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems). Ensure
  There are no remnants of previous programs - use removal tools when they are available.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Why my W500 livelihoods get a window 4.6 experience even if I do the same step as you guys?

  Hi all

  I have a W500, but he has only a 4.6 window experience.

  I read the topic and follow the steps, but without hope.

  I put my High Performance video card in the Panel ATI already

  I can see that my video card FireGL V5700, video BIOS 2008/10/15

  My driver video package Version: 8.563.2.1

  Windows Vista x 64

  My config:

  Intel T9600

  1920 x 1200

  4 GB

  120 GB-7200 RPM

  W500 Bios Version: 3.00 (6FET70WW)

  My config to display in the BIOS:

  Device video primary deafult [Exprees PCI]

  Display startup [ThinkPad LCD]

  [Discrete graphics] graphics device

  OS for Switchable Graphics [disable] detection

  Is there something wrong?

  How can I get experience 5.3?

  Thank you

  Thanks for the help. I'm getting a 5.3 now!

  I was using 64-bit Vista, which gave me a 4.6.

  I installed a Vista 32 bit, and then I get 5.3.

  

• Conflict of a process 'rundll32.exe' while playing games

  Some of the games I play: NFS Carbon, a "rundll32.exe" process is also generated at the same time. This process makes use of the processor to 100%, which makes my PC too slow like a SNAIL. In some devastating diseases, 75% of the list of all the processes in the Task Manager is filled with "rundll32.exe". This process is in the 'System32' of 'Windows' folder in C:\. My Kaspersky Internet Security 2010 also ignores this process like a virus. My PC is also equipped with A 3 GB of RAM, AMD 2.01 GHz processor and a nVIDIA 9400GT 1 GB gaming graphics card. Its quite pathetic that I can't play a simple game like NFS Carbon with this configuration. Please help me as soon as possible...

  Hello

  Maybe these will help. (If you think that it may be malware see next message.)

  References to Vista also apply to Windows 7.

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait for a few minutes without doing anything - then right click on taskbar - task manager - take a look at stored by - Services - process - it is a quick reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys and other objects processes have open, which DLLs they have loaded, and more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system boots and you login. Autoruns also shows you the full list of registry and file locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically when Windows starts. For each request, the following information is displayed: Startup Type (registry/Startup folder), command - line String, product name, file Version, company name, location in the registry or the file system and more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">