Qosimo G20: Device i/o error - DVD drive does not read CD

Similar Questions

• CD/DVD drive does not read discs on Equium A100

  My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.

  Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.

  Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.

  If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
  After phone restart the operating system will recognize and initialize the disk again.
  After this review of the procedure if you can read, write the middle.

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD drive does not read

  I lost my device manager dvd and can not get it back.  Of course, I can't read the dvd player.  I have removed the upper and lower registry filters and removed and re-inserted the disc.  I also bought an external hard drive and the material has been recognized and installed but doesn't always have showe upward on the Device Manager and have not loaded a dvd.  Is my computer and HP Pavilion dv9500 laptop and runnig Vista Home Premium

  Hello

  It is not rare when you have this type problem so that it can affect more than one/all CD and/or DVD
  readers.

  Step 1: Please do all the same underneath if you did some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive on someone with the same model (s).

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite L500-13D-CD/DVD drive does not read CD

  Hello

  I have a Toshiba Satellite l500-137 laptop with vista sp2.
  There is a cd writes that my dvd drive would not read, the driver can read other CDs & DVDs well.
  who says cd's seems to be fine as it can become red from the other computer.

  any suggestions?

  * Thanks to *.

  Hello

  That means only one disc can be read from your laptop and all other disks can be read properly? Well, in my opinion, it could be a disc problem, maybe it's striped s and so it can t be read to all readers.

  In your case, I would try to clean the lens of your CD/DVD drive. Therefore, you can use a microfibre cloth.
  Check it!

• The CD/DVD drive does not read discs

  Hi, I have a COMPAQ Presario CQ40 with optiarc DVD RW AD - 7561 ATA Device driver, recently the drive does not work properly. It can read and burn the disc, that I already used, but when it's a new (disc white) it does not read the disc.  It has an error message "make sure that the disc uses a format windows recognizes. If the drive is not formatted, you must format it before you use it. "the disc is the format that would recognize the system.  I tried to uninstall the drivers and reinstalled from the Device Manager, but nothing works, tried too much microsoft fixit, always the same.  Hope that there is another work around here... Thank you...

  Have you tried using other burning software?

  Try this free you see if you receive messages.

  http://CDBurnerXP.se/

• SD-L622A CD/DVD drive does not read some CD - Satellite L300-144

  Reader TOSHIBA SD-L622A.
  The drive does not boot with Windows XP Service Pack 3 CD, starting with the diagnostic utilities CD (IMHO 2 CD format).

  Also, these CDs do not see a car even under Windows XP, Vista.
  My wife bought Toshiba L300, but another change. There are player Matsu * a (Panasonic).
  Problems with the same discs was not raised.

  PS Sorry for a terrible English. My mother tongue is Russian :)

  You created the recovery DVDs?
  Laptop can't see this recovery DVD?
  Have test you with Linux Live CD?

  Your laptop can recognize content of different CD/DVD (movies, music, data) under operating system?

• Satellite P200-140-CD/DVD drive does not read the CD

  Hi all

  I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
  I've updated the drivers, cleaned the lens, completed all the normal tasks.

  Any advise / solutions out there?

  Hello

  Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

  (1) run regedit (Start-Run-Regedit online online)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  I hope this works for you too! :)

  Good bye

• COMBO DVD DRIVE DOES NOT READ THE DVD DOUBLE LAYER

  DEAR MEMBERS

  V HAVE DELL OPTIPLEX 330 PURACHED SYSTEMS. WHEN V TRIED TO RUN MAGZINE OF FIGURES AND OTHER DVD DOUBLE LAYER ON IT. DVD PLAYER DID NOT READ THE DVD SAID. WE HAVE REPORTED THE MATTER TO DELL. BUT AFTER HAVING REPORTED THE MATTER TO LONG-TERM DELL, NO SOLUTION HAS BEEN GIVEN BY THEM

  PLS COMMENT

  URS

  SGUPTA

  
  

• My CD/DVD drive does not read and is therefore no longer is visible on my computer, the BIOS or Device Manager.

  I just realized when inserting a CD, he has not read. I havn't he used in awhile, so it can't just happen. When I insert the CD you can hear it spin and green light flashes, but after about 10-15 seconds it stops and the light goes out. Under 'My Computer', I see more player. I don't see the driver CD/DVD option in my Device Manager menu longer, and I do not see it in the BIOS. I have a HP Pavilion Labtop.

  Any ideas? Thank you!!

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums of HP for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Since it is not recognized in the BIOS, which means that the reader could have failed, there is a possible cable or
  problem of controller or other hardware problems.

  ===================================

  If you can get it to be recognized in the BIOS and it still doesn't work, maybe these will help.

  You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
  DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps. Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Equium A200-1V0-CD/DVD drive does not read disks

  Hello

  in 'My computer', it shows the drive as being there for the dvd/cd etc, and when you put a disc in it makes all the noises whirring that it starts to read, but they are actually not autostart or anything and you do not see them on the screen 'my computer '.

  It lists just like the normal reader, as thoough, that nothing was in it.

  Double clicking on it does nothing at all, nor open or explore.

  Any ideas please?
  Thank you.

  Hello

  There is a general solution but it doesn't work still, but in my opinion it s no doubt worth a try.

  First of all, you need to remove the drive from Device Manager.
  Simply access the Device Manager, mark the CD/DVD drive and remove it from the list of devices.

  In addition, you will need to access the registry using the regedit command.
  There, you have to completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, restart the laptop and wait until the CD/DVD has been recognized again.

  Check it!

• Cd/DVD drive does not read DVDs on Windows 7

  I have a HP Pavilion dv4 notebook with a DVDRAM GT20L ATA provided device with my computer and since I got it sometimes refuses to read my regular DVDs and dvd movies game disc sometimes. all the drivers are up to date and the problem seems to come and go. any help would be welcome. Thank you

  Hello

  Do you have any software installed on your computer for CD burning?

  Follow the steps in the article to resolve the problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Media in the CD/DVD drive does not read it shows blank CD/DVDs. Then try to open it will burn directly

  Dear team,

  I use Acer 5740C with TSSTcorp CDDVDW TS - L633C ATA Device.It worked fine, but recently I formatted my drive because the cd/DVD drive driver wasn't loading and he lacked the drive. After formatting, my DVD player couldn't read any CD/DVD and watch as Emoty or balnk. While trying to open with right click, combustion process begin! I tried HARD but cannot be resolved. Set the auto play options and also uninstalling and reinstalling the drive, but nothing worked. Please Helppp.I'm waiting for the solution proper pleaseeee

  Hi sergeblache,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems to use the DVD drive to read and write disks, we try these steps and check if it helps.

  Method 1:

  Given that you've tried the Fixit and relocation of the reader, you can read the article and try manual steps to change the upper and lower filters in the registry settings. Check if this may help:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The article mentioned above shows you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, see the article:

  Back up the registry

  Method 2:

  If you have installed a third-party DVD burning software, then Uninstall the same and look for the question.

  If you need further assistance, please answer and we will be happy to help you.

• CD/DVD drive does not read disks inserted

  Original title: ASUS DVD-E818A6T DVD player

  ON MY PORTABLE CD/DVD of weird things or readers seem to only happen when I created my wireless printer everything is OK but when ever I tryto run CD/DVD which have already run - now the discs are not read or as after investigation I always said that the drive is EMPTY - HELP!

  Original title: ASUS DVD-E818A6T DVD player

  ON MY PORTABLE CD/DVD of weird things or readers seem to only happen when I created my wireless printer everything is OK but when ever I tryto run CD/DVD which have already run - now the discs are not read or as after investigation I always said that the drive is EMPTY - HELP!

  Hi, I had the same problem and very frustrated as my CD/DVD stoped working after an update by Microsoft, it wouldn't read any CD or burn anything.  I had no chance after trying all the solutions offered by Micorsoft.

  I tried my laptop manufacturing couple of times and had no answer, finally I got an email from those who proposed the solution. My problem was solved following in their footsteps, and I hope it solves the current problem of other frustrated users who tried the Microsoft solution and are always looking for an answer.  I copy and paste the exact observation of my e-mail.

  "For this issue, first remove the WEIRD Device Manager device and then analyze the change for a trial.

  So again, please load by default in the BIOS as follows. Please turn on the laptop. As soon as you see the ASUS logo to enter the BIOS, press F2. Then press F9 to load the BIOS default. Then save and exit and then restart the laptop.
  The BIOS flash procedure is now complete. »

  Good luck to all.

• CD/DVD drive does not read smart TV card software CD

  Recently I buy a smart TV card and I can't seem to load the disc that came with the tv card. Can someone please help?

  Hello

  Have you checked if the drive supports and that it is able to read other CD?

  I hope that the drive is not too bad?  :|