Qosmio DX1210 starts plus-mise the Bios updated has no

Similar Questions

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• Y510P Windows starts only after the BIOS update

  Hello

  I updated the BIOS of 3.05 to 3.08 and the unit starts, loads for a little, blue screen of death and then begins. All the solutions to this problem?

  I changed the SATA from AHCI to IDE settings in the BIOS and I can now boot Windows

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• Satellite L855 does not start after the BIOS update

  I downloaded the BIOS update and followed the instructions there during the installation, but on reboot (including the requested configuration), I get a blank screen. Intermittently, the CPU fan starts and stops. I think that the BIOS update failed, how to solve this problem?

  Thank you
  Neil.

  Hello, Neil

  In General when the BIOS is screwed up you need professional help and you should contact the nearest Toshiba service provider and ask for help.

  See also this thread. Perhaps this methid can help you too.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Lenovo E560 does not start after the BIOS update

  Finally, gave in the throbbing Lenovo and updated the BIOS on my E560 - big mistake.

  He's been through and installed correctly, no problems with chess, etc. (finally none that appeared on the screen).

  The laptop delivered to market very well, he crossed and updated the BIOS, restarted once and... nothing.

  At the present time I jumped the battery and power, reset the device (press the pwr for 15 sec, etc.), removed all devices, etc., etc., google for similar events and so little matter what I did, the laptop is as dead as a brick. I have the red on but that is all. Nothing doesn't appear on the screen (so can't see UEFI/BIOS), no fans start and the only thing that does the job is that the DVD drive can be opened.

  It's a relatively recent laptop (minimum 12 months so still under warranty), but as a word of warning to the other owners E560 - DO NOT INSTALL THE latest VERSION of the BIOS update.

  Well not unless you want a weight of expensive paper for your office.

  Managed to get everything sorted out (thanks to Lenovo support).

  Pop the battery and AC, then remove and reinstall the CMOS battery brought the laptop to life.

• Qosmio G20-115 - can't seem to run the BIOS update

  I have a Qosmio G20-115, which I'm trying to run an update of the BIOS on because what he s not recognizing nor charge the battery, it s give an error message: The Ac adapter is not connected, or not enough battery power.

  What can I do to run the BIOS update successfully or get the laptop to recognise the battery?

  Hello

  What happens if you remove the battery and the laptop works on AC power only?

• Qosmio G15: Where can I find the BIOS updates

  Simple question... Toshiba Qosmio G15, running XP.
  Where can I find the BIOS updates?

  This should be so simple, but somehow did this simple task very difficult.

  It looks like a series of portable US and so you should check the page Web of Toshiba us.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

• Z50-75, does not start after the bios update

  Hi all!

  I just baught Z50-75 with AMD FX7500, 8 GB of Ram and FreeDOS. I installed Windows Pro 8.1 and they shot a few drivers during the installation and I went to the view of Lenovo and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and everything was OK The latest drivers I've seen on the site were originally from the BIOS and I downloaded those to and he started the installation, after which he said: "the system will now restart for the changes to take effect" and he did, but it wouldn't start after he did that show me this on the screen:

  And I tried both options (either with the Windows CD inside), but it just stays where it is, no effect.

  I can enter the bios and change the settings, but none of them seem to work because that's the maximum where it will go, the only difference is when I change from AHCI to compatibility mode, it restarts and I get a white screen, I have to use a button recovery to return to the image above...

  I appriciate any help kond, please give me some advice.

  Thanks for the reply!

  I solved the problem after updating the bios, communication between it and the disk hard drive had a few problems and is causing the boot problem. I solved with out the hard drive and install on another laptop, flashed the windows and installed the hard back in my Lenovo, and that worked.

  You tell the truth, I don't really know how it was the solution, but it worked, I guess that Flash just windows helped the hard disk to create the new connection to the bios, that the first was simply corrupted by an error during the update of the bios...

  Now, I know that the bios update is the last solution I'll never use, and of course, save all peace of data I had on the hard drive if possible.

• HP Envy 15 Touchsmart does not start after the bios update

  I had one laptop touchsmart from HP Envy 15 (initially Windows 8, windows 8.1 now) for about 2 months now and have not had any problems, until a few hours ago I tried to update the bios of my laptop with the hp support assistant. After the reboot, the pc is more would start up and took me to a blue screen with the error SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Everything that I've done short far from a refreshment or a reset has not worked and if I could I would avoid both that I don't have the bandwidth to download windows 8.1 again.

  HI Calsius:

  Thank you for your query.  I will be happy to help in any way I can!

  After the Windows 8.1 update, did you create a restore point?  If so, you can use to restore from that date and not lose your 8.1 updated.  Some BIOS have an option for a restoration which should not affect your operating system.  I did a search of Microsoft and found this answer click here.   Here is a document on the ' update the BIOS'   click here.»  You did not provide your model number and the HP Envy 15, is a series, so I couldn't get a specific documentation for your computer.  Here is a document on ' computer will start (Windows 8) " click here. If you are able to get your computer running and upward I update all the driversand then create a restore point to return if necessary.  If the Bios update should fail a 2nd time, your restore point will take back you to just before you retried the update. If you were to use the recovery option you need go back to Windows 8, or back to the factory.

  Please let me know if this helped.

• Satellite C660D-104 does not start after the BIOS update

  Hello

  I installed the latest version of the bios on my computer Satellite C660D-104, but it has not restarted.

  Where is the place to do a reset?

  Under the ram I have any triple x or B499

  I can not find, can you help me please?

  Thank you

  BIOS update has not this means that the ROM module (where the BIOS is stored) isn t flashed properly.
  As far as I know that this problem could be solved by flashing module ROM using Toshiba BIOS disk of the crisis.
  I guess Toshiba authorized service provider to have this disc of crisis and able to reflash the ROM

• Tecra A11 - 11N - after that the BIOS update programs not loading now

  My model is Tecra A11 - 11N. I ran the BIOS update and now some of my programs, including ITunes, Nokia Ovisuite, payer VLC etc. are not running. I tried to uninstall and reinstall them, but same problems.

  In any case to come back before upgrade?

  Hi evangny,

  I also Tecra A11 in front of me and have installed latest version of BIOS but this didn't affect all installed programs. BIOS and installed programs are different.
  What you can do is load the default settings in the BIOS after the update.

  Can you be a bit more detailed?
  What exactly happens if you try to start these programs? You get an error message?

  You use the version preinstalled Windows from Toshiba?

• After that the BIOS update can not use Debian

  I upgraded to v3.70 Bios and now my Debian has following problem:
  at the start of the adage about stucks kernel:
  PCI: BIOS Bug: f0000000 MCFG area isn't E820 - reserved.

  Did I screw the upgrade (Win startup, run the bios update and follow the instructions)? Or is this normal?
  How can I know Toshiba, they have the bug in the BIOS?

  Stepan

  Hello

  After the BIOS update you can use delivered and supported operating system (recovery image)?