Qosmio F10-103, Unmountable_ boot_ volume... What can I do?

Hello
I have a Qosmio F10-103.
One day there is the blue page with
writing "Unmountable_ boot_ volume"
appeared!
What can I do?
I have red on some forums that it (could) be
a hard disk problem and that
I could fix the cpu using the
boot Windows xp CD, copying files
Boot.ini, NTDETECT.com, NTLDR... but...
Toshiba gave me only the DVD - rom backup,
not boot xp.
Then I tried to use this end DVD as I entered
in Toshiba 1.0.1.0 recovery utility
and I had a disc of control... the result was:
«Application error 29004»
Read down sector, result = 1, disc = 128, sectors
132479 to 132481 if the problem persists contact toshiba... "
I am here!
It is useful to say that all modes of starting
Windows does not work.
In addition, the "look-like prompt back" that appears
Once out of the recovery utility does not
to copy the file, I need the DVD.
What can I do?
Is there something to do before... the formatting
procedure?
Thank you very much!!!

Hello

Check it please this Microsoft article on this error message.

Microsoft Knowledge Base. Q297185

Good bye

Tags: Toshiba

Similar Questions

  • Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

    Hello

    I am the owner of a Qosmio F10 with Win XP MCE.

    I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

    The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

    The problem also occurred with other devices that is my Ipod.

    The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

    Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

    Please note that I cannot go into 'Control panel' I get an error message and closes the window.

    I hope someone can help me.

    Best regards

    Green tentacle

    USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
    What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

    Reboot the laptop.
    After restarting again the operating system should recognize and install again the USB ports.
    This accelerated procedure should help you

  • my menu bar disappeared, and when I press Alt or F10, absolutely nothing happens. What can I do to get my menu bar back?

    I have Windows 7. Firefox was working fine until last week when the menu bar disappeared and Google, my homepage, am really big and taken all the space on the page. I read about how put my menu bar on this page. I pressed Alt and she came once. Then, later, when I came back to the page and you press Alt to get it back again, it would not come back. Nothing happened. I have read and learned I could try F10. I tried and nothing happened. What can I do to get my menu bar back and hold again?

    If you don't have a title bar, menu bar or toolbars, you can be in full screen. Press the F11 key to toggle the Mode full screen or not. In addition, if you are using the full screen, moving your pointer over the top edge of the display screen causes the toolbars of 'slide' down; While the tool bars are low, you can click on the right in the empty space at the end of the tab bar and click on "exit full screen".

    To turn toolbars on or off see the following. The selected items will be displayed. Click on an item to check or uncheck it.

    You use Firefox 4.0.1 which is no longer supported. Firefox 5.0 is an update of safety and stability for Firefox 4.0.1. Still some add-ons do not work with Firefox 5.0, because third-party developers of Add-ons have not updated their products.

    You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

    • Adobe PDF plugin for Firefox and Netscape
    • Shockwave Flash 10.0 r32
    1. Check your plugin versions on one of the following links:

    2. Update of Adobe Reader (PDF plugin):
      • Within your existing Adobe (If you have already installed) drive:

    • Open the Adobe Reader program in your list of programs
    • Click Help > check for updates
    • Follow the instructions to update
    • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
  • Download the full installer (If you have NOT installed Adobe Reader):
  • After installation, launch Firefox and recheck your version.
  • Update the Flash plugin to the latest version.
    • Download and SAVE to your desktop, so you can find the Setup program later
    • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
    • Once the download is complete, exit Firefox
    • Click on the installer, you just download and install
      • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
    • Launch Firefox and recheck your version or up to the download link below to test the installation
    • Download and information: http://www.adobe.com/software/flash/about/
      • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
      • Use IE to go to the site above to update the ActiveX to IE
    • Download manual installers.
  • Qosmio F10-132 - HARD drive failure - what HARD drive do I need?

    Hello, my hard drive is down, I have to find another, on the external drive only from the web of toshiba 2.5 are available!

    the HARD disk must be an IDE? not a SATA?

    you, changed your? where to find it?

    Thank you

    Hello

    AFAIK the Qosmio F10 needs SATA drives
    I think that you should find these information in the user manual, or here in the forum, use the search option and you will get a few discussions about the HDD F10

    However, these 2.5 SATA HDD can be bought from dealers for different laptop/computer or online (online store).
    You do not need to buy a Toshiba HDD usually, you can use different hard drives from different manufacturers, but the plug of HARD drive be right!

    See you soon

  • Qosmio F10 - Bluetooth does not work

    Can't get my Bluetooth to knitting - machine came with it already charge. My Palm found once but hangs when I try to transfer the data. Now can't find it. Get an error message when I try to change your preferences on my laptop is detectable and will not save the setting.
    Help!

    Hello, Janet

    I don't know, but all Qosmio F10 do not have Bluetooth. Can you please check it you can see a Bluetooth label in the lower corner of your laptop? It looks like this one http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm.

  • Qosmio F10 Fan - where can I order one?

    Hello

    Anyone know how I could find the part number of the fan without microprocessor (I don't know if it's a GPU fan or what, is one of the more toward the Center on the laptop) for the Qosmio F10?

    I found the part number of the fan CPU (P000388590), but it is a different size. Also is there anywhere in the United Kingdom, I might be able to buy the new fan without having to send my laptop? I can only find sites in the United States that sell the fan from the CPU to the end user, so the same could be true of this fan.

    You have a command parts compatible Toshiba service partner in your country.
    I guess that it s also able to control the compatible fan.
    The link to the page with the ASP database gave a lot of time here in the forum

  • Qosmio F10 - where can I find the correct BIOS update?

    My Qosmio F10 has a mother of replacement of Toshiba with a Geforce Go 6600 GA and an Intel 915 chipset.

    If I understand well Toshiba manual support that this should now be designated F10 - R. I tried to update the BIOS to the latest version (2007) F10 but the update procedure he throws as invalid for this machine. A research on F10 - R shows nothing.

    Can anyone help?
    Thank you
    Adriandr

    Hello

    To be honest I have never heard the Qosmio F10 - R
    I think you should ask your authorized service provider again before we do something wrong. They can tell you what BIOS you need for an update.

    Also, why do you want to update the BIOS? This t shouldn't be done just for fun because this update is always somewhat risky and should only be done if you have a problem with your laptop.

    Welcome them

  • Qosmio F10: How can I install Win XP MCE 2004 again

    Hello

    I have a problem with my recovery dvd - rom supplied with my laptop TOSHIBA QOSMIO F10. I bought in London, message of cams of upward on the screen error "\WINDOWS\SYSTEM32\CONFIG\SYSTEM / Windows didn't start because the following file is missing or damaged '

    But now I live in Brazil, so how can I install again my operation system XP MCE?
    Because I have the OEM software pre-installed in.
    Can someone help me please?

    Don t understand why you open a new topic!
    You have already posted this here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25711

  • Qosmio F10 with mainboard replaced: where can I find the right drivers?

    Hello guys,.
    Toshiba service replaced it by a new one, including a geforce 6600 gpu on my F10. So, now I formatted the laptop and I want to once again return to work. But I see that there are a few different devices, such as the 6600go gpu.

    Where can I find the drivers (lan, chipset, modem.. etc..) On the toshiba web site? If I choose qosmio F10 downloads, get the drivers for the old motherboard (and the 5700 graphics card).

    Anyone know where to find the correct drivers? Thank you!

    Hello

    Check it please THIS page.

    I assume that LAN driver chipset and driver are also the same.

  • Qosmio X 500 - 11U - what can I do to clean disk space

    Qosmio X 500 - 11U

    On my drive D are only 5 files.
    Folder 1 is books with a 3.19 GB size
    2 user Tosh folder, if I aanklik then it asks me
    the files will cost, size is unknown to me.
    folder 3 program files, there are empty
    4 dossier programfiles (86) it is also empty.
    Folder 5 WindowsImageBackup with a size of 71 GB, if I get this is open
    you new user tosh.

    the D drive is 500 GB and I get the message disk 1 flight.
    Also the high sum together I don't come to 500 GB
    What can I do to clean the disk space and how to avoid that the disc is full.

    I Ka erasure of disk D all I am also the recovery password?

    Sincerely,

    Hello

    It seems that the system C partition is full.
    You can move files such as mp3, images or the docs to the D partition.
    You can also run CCLeaner to clean and remove the time stored files.
    Its possible that there are some files/data on the C drive that could be deleted using CCleaner

  • "Delete Volume" grayed out. What can I do to remove the partition?

    Hello world

    I have a laptop quite old and finally 37 GB C: drive is full and I would like to delete the partition between it and the 35 GB D: drive so I can use the entire disk. However, when I go into management records 'Delete Volume' is gray, only "shrink Volume" is available and it cites only 2031MB.

    I moved all my files to D: drive to my external drive created back - ups, system images etc. The only thing that remains on the D: drive is 4.71 GB of 'EULA', "LocalizedData" and "SetupResources.dll" of the system files. Would it block the 'Delete Volume' If yes what can I do?

    Running Windows 7 Professional, 64-bit.

    Thank you very much

    concretekeyboard

    You have a cd win7 from MS to the real address or only this laptop manufacturers defined recovery disk?

    Use the recovery to the whole disk restore destructive, if this time causes the two partitions of C & D one, then use the free http://www.partition-tool.com/personal.htm to remove D and expand C

  • Can not find the driver for Qosmio F10-101 TV tuner

    Hello everyone,

    I bought a new Qosmio F10-101... since he has previously installed Win XP Home, I reinstalled the operating system XP Professional... this time the Device Manager is to give a warning to a PCI device that is supposed to be the TV tuner... I'm looking for the TV tuner driver which works on XP Pro... any help is appreciated...

    Thank you...

    JUST GO TO THE DRIVER DOWNLOAD PAGE OR TYPE:
    http://support.toshiba-tro.de/tools/Qosmio/F10-G10/MCE/TV-tuner-XP-1020.zip

  • Qosmio F10: Cannot set up the TV Tuner!

    I can't be able to receive any form of TV on my Qosmio F10 signal.

    I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

    I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

    All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

    Someone else had this problem?

    Any ideas?

    Ok... No one has any ideas, then!

    Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

    They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

    They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

    As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

    Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

    I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

  • Repair Qosmio F10

    Hello

    I have a Qosmio F10 which was purchased in me for repair.
    He underwent the faliure GPU from nVidia to the common address but meets in perfect condition and certainatly too good to discard.
    I managed to get your hands on a part of the Service of OEM new motherboard to fit, but I don't want to just put in there and then the case of fault on the road.

    What I'd like to know if there is anything I can do or even to change the laptop to help avoid this problem.

    This is not my laptop and I don't really want to start cut about to help with cooling unless it will really make a difference if someone actually found a way to stop it or at least make him last a good few years?

    Any help would be greatly appreciated because I know the owner is very fond of his laptop and wants to keep.

    Thank you very much
    Ben

    Maybe it sounds silly now, but I put t know what kind of trick you want to get here. If you have good working mainboard, compiled the Qosmio and test how it works.

  • Qosmio F10-125 TV tuner

    I just took delivery of a F10. Excitedly, I plugged the Jack on the back of the PC to the regular Arial and searched the signal by the auto scan the media Wizard. No signal has been detected. I tried to use the analog RF signal of my Sky digi-box, which must be a good sign that can be achieved. Still nothing. In both cases, coaxial cables carrying a signal healthy as evidenced by TV happily play all channels on the cable from the two sources

    Someone knows what to do? or this wonder Qosmio F10 is a joke!

    Post edited by: Ronaldat

    Hi Ron

    As far as I know that you use Composite in the port if you want to watch TV using Qosmio player. In this case, you can change the channel on your cable box and watch it on your Qoamio. In this case, Qosmio player should find a single channel.

    Composite in the port is for video and audio signals. If you use S - VHS to it's just for video signal without the sound and I don't know if it will work properly with Qoamio player.
    Please try again with Composite in the port. I am very interesting if there is some success.

Maybe you are looking for