Qosmio F10-124: some problems after installing Vista

Similar Questions

• Boot problems after installing Vista SP2 (KB948465)

  I installed SP2 via update.  During the update process there was a power failure.  After that (I don't remember if it's immediately after, or if a few days elapsed) I had problems with the startup.  Initially, seemed the Startup Repair to fix the problem, but not permanently, and the Startup Repair had to be used repeatedly just to start.

  After a few times of what is happening, Startup Repair did not turn, and the PC wouldn't start.  After about 5 attempts using the decision-making power, sometimes choose the Startup Repair, sometimes choose to load windows normally, he did start.
  I immediately did a system restore to return my PC before SP2 was installed.

  After the restoration of versions prior to SP2, Windows Update showed that the SP2 update failed.  It was on 9 November.  As I need my computer, I didn't reinstall SP2 until I had finished this work.

  As I thought that the problem is probably caused by the power outage, on 10 September, I reinstalled SP2.  Windows Update show no SP2 as an available update, then I downloaded and installed the standalone update.

  Between the 10th and today, 14, Windows Update has installed more than updated.

  Today, I was unable to start for the first time since the reinstall SP2 and Startup Repair has allowed me to open a session.
  I tried to uninstall SP2 via update.  The first part of it seemed to work, but when it came to reboot, the PC stopped at the end power to the bottom of the procedure.  I used the power switch to turn the PC back on.  After startup, the PC told me that deletion failed.

  Then I tried the system restore.  Unfortunately, the first available restore point was post - SP2 installation.  I restored it for the point that is as close as I could.  I tried to uninstall SP2 again through Windows Update.  This time, I receive a generic error message immediately (less than a second) - it does not attempt to go through the configuration - restart the procedure.

  I haven't restarted my PC since then.  Most updates have been downloaded automatically, and the PC tells me that a restart is required.  I'm a little worried that I will end up with a completely insensitive PC.

  I use an Acer Aspire X 3200 with Vista home premium pre-installed.  I don't have a Vista disc.

  Hello, Alex

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Some problems after installing Windows 8 on the Qosmio X 500

  Hello
  Sorry for my bad English...

  I have a qosmio x 500 PQX33E. I installed the upgrade of windows 8.
  But I have problems drivers.

  For the eco mode, the digital key does not respond.

  For the HDMI to the TV connection, before the connection is automatic. With windows 8, I have to do manually.

  I had to disable the optical driver to operate the bluray player.

  And several other pilots missing for windows 64 b 8.

  Do you know if I can use a different drivers, qosmio, qosmio x 875 as?

  is that Toshiba will create windows 8 drivers for our old machines and other qosmio?

  Thank you very much for your answers.

  > Do you know if I can use a different drivers, qosmio, qosmio x 875 as? Is that Toshiba will create windows 8 drivers for our old machines and other qosmio?

  As far as I know Toshiba released an official list of old Win 7 notebook series that will save 8 drivers and support.
  The matrix to win 8 can be found here:
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/checkWindows8Compatible.do?service=EU

  As you can see, the Qosmio X 500 series is not that is why I think that Win 8 drivers will come out of this show.

  But in some cases, you can use the tools to win 8 who were released for other series.
  As for example the VAP Toshiba to win 8.

  However, this does not mean that everything will work as in the past using Win 7

• Internet problems after installing vista SP2

  I'm running IE8 and yesterday I installed Vista Service Pack 2.  After the installation, I got an internet connection, but could not access all pages including my home page.  The pages would hang and the little blue circle would go round and round and nothing happened.  I also have Firefox downloaded on my computer, and still the same thing happens again.

  I checked my system tools in the lower right of the desktop and my icon for connectivity internet local and internet had a red cross on it that has not changed.  I restarted my computer several times and nothing has changed.  I used the prompt commands and ping google (my homepage) and found within seconds, so the connection was there but not able to access all pages.

  I am running Vista Home Premium as my 32-bit operating system.

  To cure the problem so far, I did system restore and completely got rid of the installation.  As soon as I did, my internet was totally fine with IE8 and Firefox.

  Any suggestions, I won't install SP2 again until I know what has caused the problem of the internet, and he was healed.

  Hi Smokeycat,
   
  Thank you for writing to Microsoft Windows Vista Answers.
   
  Since you have already restored the computer and the internet works fine, try to reinstall the stand-alone version of Service pack 2. Later, try to connect to the Internet.
   
  You have security software installed on the computer? If so, try disabling the security software and install the stand-alone version of service pack 2.
   
  Try to install the stand-alone package for Windows Vista Service pack 2, access the link below and download the file to the desktop. Later, run the installation of Service pack 2 from the office.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
  If the problem persists after you have installed the stand alone package, reply came back with the details:

  1. try to boot into safe mode with network after installation of Service pack 2 and try to access Internet
  2. in normal mode, try to right click on the network icon in the taskbar and click on diagnose and repair, if it gives any error make a note of it and we gives the error.
  3 - is wireless to a wired connection?
  4. do you have any router installed?
   
  I hope this helps.
   
  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sound problems after installing Vista on Satellite A100

  Hello

  I have something new, something I've never seen and I do not much [as appropriate] of you.

  Today, I installed Windows Vista Beta 2 on my laptop Satellite A100-192. As it is Vista compatible now [I added some memory] I think it's the right time to see the new operating system [that is great, he will rule the world for sure].

  But back to the topic.
  After the installation of Windows Vista, which has detected almost all of the software in my pc and have fun on this topic / and there are a lot of things an old fart like me, can have fun with / I decided it's time to get back to work.
  So I restarted my toshiba for win xp, started working and has decided that music will surely improve my / concentration i'm from Poland and as many of you know, my team lost the first game of the 2006 World Cup. so they will not pass the group stage of WC2K6--real cause my humor today. After turning on my foobar, I realized that I don't hear nothing/i do not drink, so he can't really be the cause. I've set all volume settings, all the settings of the sound and nothing! I tried headphone jack, but it does not work too. I tried reinstalling the drivers, reboot the system several times and... nothing.
  I went back to Vista and... sound works like a charm.

  Bromine to Vista my sound on XP...

  Anyone has any bright ideas, how this could have happened and how to solv it / accept to remove vista from windows...?

  I would be greatfull for some advice...

  Best regards
  Krystian

  Hello Krystian

  If you use recovery media supplied for installation of WXP is the noise problem persist?

• Qosmio G30: Cannot burn DVD after installing Vista

  Hello

  I'll upgrade to Vista, but the problem is that there is no PILOT of RAM DVD!
  What I ask is the following: -.

  1 at - it Web site that display all the drivers {for Toshiba}

  2-if I was not installed this program, I could record DVDs?

  3. If there is a driver for it, I am glade he get you {vista}

  Yes I forgot to mention 1 thing, my machine is QOSMIO G30!

  Best regards

  knk2006

  1. Yes, you can view all the drivers for your laptop model and the operating system on this page:

  http://EU.computers.Toshiba-Europe.com (Support & downloads)

  2. I think there, like WinXP, already supported this, a base built into a program for recording discs, but I do not like he doesn't have many options. I suggest you try other programs like nero 3rd party

  3. normally, this DVD Ram driver should be included in Vista. Maybe you could try to use another program, as I mentioned above.

• problems after installing Vista SP1

  I have Vista 64 Business edition. I managed to install SP1 from a MS DVD.

  The only problem is that after installation I can't get internet connection.

  I'm on broadband with Tiscali/Talk Talk and my connection is cable to router Thomson TG585 v7.

  If I uninstall the update SP1 my internet connection works perfectly.

  Talk Talk were unable to help.

  Thank you very much

  Geoff

  I have Vista 64 Business edition. I managed to install SP1 from a MS DVD.

  The only problem is that after installation I can't get internet connection.

  I'm on broadband with Tiscali/Talk Talk and my connection is cable to router Thomson TG585 v7.

  If I uninstall the update SP1 my internet connection works perfectly.

  Talk Talk were unable to help.

  Thank you very much

  Geoff

  Download the drivers from the hardware manufacturer for the device INSIDE the computer network.

  What is a clean install of Vista or something (why just get installed SP1 - since SP2 came out for years)?

• Satellite click on Mini - some problems after installing Win 10

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Posted by bilou24an199
  

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Wow the GUY you described exactly the same problem as me...
  If anyone can help that would be great.

• Qosmio F10-136 - no sound after installing WXP Pro

  I reformatted my hard drive using the recovery CD, after which, I installed Windows XP Pro. Originally, it was Windows Home Edition that was previously installed. Now, the sound is missing and some components more.

  I tried to download the audio drivers from the Web from Toshiba support site but it didn t work. When executing the installation of the software Sound Max of Analog Devices, Inc., a guest of error is displayed "driver not found, please reboot your computer and reinstall again". Can someone help me on this?
  Thank you.

  First of all buddy you need to update the XP to the last State. I mean to install the XP2 and all patches and fixes available!

  Then you must download all the available drivers, tools and utilities for XP and should install it in the right order.

  The right installation order is mentioned in the installation instructions txt file.

  XP audio driver Analog Devices Inc. v5.12.0.1.5160 is available on the page and it works for sure!

  Check it!

• Some problems after installing Win 2003 Enterprise on Satellite L310-4012

  Hi friends

  I have a laptop L310-4012 and trying hard to install Windows 2003 Enterprise on this subject.
  Went through many articles and has even had a long discussion with Customer Support on this one, where it was stated that they do not support Server 2003.

  I did most of the installation on my own and most things work except for fingerprint and SD card. Have tried many things but I am not able to use it.

  Apart from that, I see unusual things happening as

  1. I'm not able to close down the machine after uisng camera. If I don't use camera, it works fine
  2 CTRL + ALT + DELETE. The task manager has grayed out
  3 seems as if the laptop doesn't work that fast.

  Need your help guys to decide as to whether I should use windows 2003 or not

  Ritesh

  Hello

  I m wondering that you have installed Windows Server 2003 on a laptop. Why do you need a server on a laptop OS?

  However, maybe I can help you:

  (1) If you have used the web cam, the software is already started and you should see an icon in the taskbar. Right click on that and close the software. Then you should be able to stop the laptop.

  (2) what you mean with gray? You can also start the Task Manager, if you right-click on the taskbar and select Task Manager.
  But I believe that there is something wrong with the operating system. Normally this has nothing to do with the laptop or the hardware.

  (3) have you installed the chipset driver? I think the reason for this is why Server is not supported on mobile phones, and therefore you can t find drivers.

  If you really need this OS to test something that I would install on VMware or Microsoft Virutal PC. On a virtual machine, you must not install any driver.

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• How can I reinstall MS OneNote2003 after installing Vista?

  Hello everyone,

  I was a bit confused of the 'ExpressUpgrade' action, because I first thought I would get
  a DVD-Windows Vista upgrade, but as I can see in ModusLink he is named "Windows Vista Home Premium 32 bit DVD"... OK, it's done now, but that's why I have other questions:

  There was additional software and utilities already installed (I have a Satellite P100 - 463 WinXP).
  I know that there is this "step by step Toshiba DVD" who has first updates the BIOS, install Vista and then the drivers needed and utility (as "Toshiba Assist" and all the others, I guess). As it is written in the guide step by step, all programs etc. will be deleted, as formatting of the hardddisk, ok.

  But with the laptop, there wasn't "MS Office OneNote 2003" already installed and this program, I have not found on one of the DVD / CD. On the CD is 'MS Works 8.5' and on 'Tools-CD"that I was burning of 'C:\toolscd' there are things like"InterVideo Win DVD Creator"(the player) and"recorder of Sonic.

  On the "Recovery-DVD" is just the Image of Windows XP preinstalled + software etc and I think of course, there is also the OneNote2003, but like I said I can't find the setup.exe from OneNote2003 anywhere...

  Or could it be that OneNote2003 will also be installed with the installation of Vista? What is a "core" Vista, don't not patched by Toshiba? As I was reading in the Vista_Express_Upgrade_instruction_multilanguage.pd f (the manual "upgrade progressive", first BIOS is up to date, then installed Vista and here again I have to use the toshiba DVD to install the software and drivers...) Is it only "utiltities' as"Toshiba Assist"or as software?

  Last question: update after the BIOS that is needed for Vista, is still possible to install the "old" Windows XP + stuff pre-installed recovery-DVD or this BBIOD goof only for Vista update and I cannot restore the original recovery image?

  And anyway, can I install new stuff like Works 8.5 etc. on Vista or will I have problems with it?

  Thanks for the replies.
  Greetings, launchee

  Hi kai

  I know that the Vista upgrade is a bit confusing
  So I'll try to clarify some things:

  1.) Toshiba Recovery XP CD contains all Toshiba drivers, utilities and tools, as well as additional programs like OneNote, Win DVD, etc.
  It is not possible to install this software separately without using the recovery CD because these programs are part of the image.

  2.) as far as I know the received "Windows Vista Home Premium 32 bit DVD of moduslink company is not a restore CD but the real Windows Vista installation CD. That's why you need to install all the tools of Toshiba and the drivers after installing Vista. This CD does not include additional software such as OneNote or WinDVD

  So finally, you will be able to install Works 8.5 on Vista because you have one working on CD separately but it s not possible to install OneNote from recovery CD

  But you can try another way. You could create a second partition and you could install the Vista to the second partition.
  Laptop you would use the two operating system; XP and Vista. The Vista also provides a clean boot manager.
  Therefore, it is very easy to switch between the two OS's.

• Computer does not start after installing vista sp2.

  When the computer is turned on it presents two options: start windows normally or start the system restart. If start windows normally is chosen, it just reloads the same screen, if launch startup repair, it tells me that it can't solve my problem and returns me to the same screen as well. F8 or help options advanced.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After installing Vista, CD/DVD drive cannot be seen or read.

  After installing Vista, CD/DVD drive cannot be seen or read.

  Hi heartmanmd,

  You get the error message?

   

  Run the fixit available in the article below and check if that makes a difference

  
  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.