Qosmio F10-125 TV tuner

Similar Questions

• Qosmio F10-125: MCE Rollup 2 update KB900325 failed

  Hello

  I try to update my Windows XP Media Center Edition with update Rollup 2 (KB900325), but the process is broken
  I get the message:
  "The update to Media Center has failed. The computer will be restarted to the State which was before the update. "If please try installing again or contact the manufacturer of your hardware for assistance if the problem percists.
  I already remove hotfix Microsoft .NET Framework 1.1 (KB886904) computer, because Microsoft recommends that before installation,
  but I can't install the update anyway. When I run the upgrade (WindowsXPMediaCenter2005-KB900325-usa), the process begins, installs the hotfix KB895572 and KB891593, and after that stops when the process tries to Install Hotfix KB895961
  My system is Microsoft Windows XP Media Center Edition Version 2002 service Pack 2.

  My laptop is Toshiba Qosmio F10-125.
  Can you halp on this problem.
  What should I do? Why the update installation has failed every time.

  Post edited by: konstanF10

  I found the advice of Microsoft, how to install the cumulative update 2 for MCE KB900325
  http://support.Microsoft.com/kb/900325

  Microsoft says to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed.

  > I already remove hotfix Microsoft .NET Framework 1.1 (KB886904) computer because of
  > Microsoft recommends that before installation

  Of course they recommend to remove this hotfix KB886904 because otherwise, installation of .NET Framework 1.1 SP1 will not succeed. But if you have already installed the Framework 1.1 SP1 you don t had to remove the hotfix KB886904.

  However, it is an area of Microsoft and I recommend you ask MS support why impossible to install the patches of singles

• Can not find the driver for Qosmio F10-101 TV tuner

  Hello everyone,

  I bought a new Qosmio F10-101... since he has previously installed Win XP Home, I reinstalled the operating system XP Professional... this time the Device Manager is to give a warning to a PCI device that is supposed to be the TV tuner... I'm looking for the TV tuner driver which works on XP Pro... any help is appreciated...

  Thank you...

  JUST GO TO THE DRIVER DOWNLOAD PAGE OR TYPE:
  http://support.toshiba-tro.de/tools/Qosmio/F10-G10/MCE/TV-tuner-XP-1020.zip

• Qosmio F10 series: tv tuner driver for linux

  Hello

  Sorry for my 'English', I hope that you will understand me.

  I installed Mandriva on my Toshiba Qosmio F10-128 but I'm looking for the driver for the tv tuner, and I'm also looking for a tv software that will run with this type of tuner.

  Does anyone have an idea?

  I heard that Qosmi Player is based on linux so I guess that a linux for a tv tuner driver is available, but I can't find on the website of toshiba :'(

  Ben

  Hello

  Sorry, but I don't believe you can find this kind of information somewhere. Maybe you should contact the service partner. A few technicians can give you this kind of information.

  Good bye

• Qosmio F10-125: Image Enhancement Utility & Media Center 2005

  I have a F10-125 and when Toshiba image Enhancement Utility is on and Fn + F5 is in mode LCD only you use Media Center 2005 there is a light brand in all the botton on the right hand of the LCD screens and it is not a dead pixel. I tried everything and even seen the same model with the same defect in a store.

  But deactivating Toshiba image Enhancement Utility brand will in Media Center, but if the excellent image quality. is their an insufficient between Media Center 2005 and Toshiba photo Enhanement utility or is their away to get rid of the keen brand.
  Thank you very much

  Hi David

  Can you please be more specific as to our image Enhancement Utility Toshiba is on? In my opinion, you can run this utility, make any desired setting and confirm with OK. Close image Enhancement Utility and then start Media Center.

  Have you checked is this brand present on some other cases such as DVD playback or something like that?

• How to capture movies with Qosmio F10-125

  A few days ago there was a post saying that good news for the capture has been discovered. I think that most of you have read and tried to use it. There was a link in it where all the problems of capture have been resolved. My problem is that this link which was published it has not worked for me and so I'm still with the problem of the capture of all the inputs that mt F10-125 films.

  Can someone help me solve the problem please?

  Hello

  Obviously this link doesn t work more. Check the BIOS settings please. There should be an option called display stretching or something like that. It must be set to enabled.

  Check the programming of the channels also manual and fine adjustment. You can find under Setup menu.

  Good bye

• Can not find the driver that will support Vista Aero for Qosmio F10-125

  Have updated my F10 Vista but cannot find a driver that will support Aero also I get a message from pilot blocked for toshiba common modules.
  Can someone advise?

  You n t need to install any special drivers to activate the Aero.
  Aero is a part of the Vista! Usually, you can use the Aero by pressing the Windows and TAB key

  But not all computer laptop and material supports Aero!
  On the Microsoft Web site, you will find information on hardware specifications that are needed to use the Aero feature

• Qosmio F10: tips on Bluetooth technology

  Hi all
  I was wondering if I could get help - I just got a new qosmio f10-125, as it has been reduced with the F20 coming out. I have a bluetooth phone but can't seem to find how to work the bluetooth on the qosmio.

  Could someone give me some advice?

  Thank you

  Hello

  First of all, you should check if the Bluetooth is on board or not. The best way to do is to check the Bluetooth label in the lower corner of the laptop. On this page please http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=96&service=EU&FID=tro000000189d.

  As far as I know that some of the Qosmio F10 series have no Bluetooth. Please check everything first and write again.

  Good bye

• Qosmio F10: Cannot set up the TV Tuner!

  I can't be able to receive any form of TV on my Qosmio F10 signal.

  I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

  I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

  All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

  Someone else had this problem?

  Any ideas?

  Ok... No one has any ideas, then!

  Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

  They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

  They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

  As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

  Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

  I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

• Qosmio F10: TV tuner pal/Secam

  Nice day

  One of my friends has a Toshiba Qosmio F10 of France in Ireland. Everything works fine except for the (tuner) tv.

  I read in a previous thread on how to get a tv signal in the Qosmio player which worked for me as well.

  Problem is that this signal is "encoded" and now that I know a bit more about the standards of television used in Europe, I'm pretty sure that the tuner is set to Secam (laptop was purchased in France, after all).

  Anyone who knows how I can configure the PAL standard.
  The fact that this machine is the french version of XP MCE is not help either that my french is rusty to say the least.

  I know that Gettysburg mentioned in a previous thread that manually operated standard tv, too bad he doesn't explain how :-)
  Only that I can find is I NTHE bios but it is only for the tv (pal or ntsc), then that does not work either.

  Please help me, frustrated here, not a good thing...

  Hello

  as far as I know the series Qosmio with MCE and TV tuner is specific countries because in Europe there are different standards of television for each country!

  Sorry!
  Bob

• No tuner = no S-Video capture! (Qosmio F10-101)

  I just bought Qosmio F10-101, which comes without a TV tuner. I tried everything to save my VCR to the computer's S-video input, but this is not possible. I have already installed the registry patch and I tested several applications like WinDVD Creator video recording supplied with the machine, they do not all video input ports.

  The main reason why I bought this machine, it's that I thought that the S-video input could be used for recording the video on the hard drive. But it seems that this is not the case.

  So, I'm supposed to return the unit for another model? Or is there a workaround to record a S-video input to the hard drive? Please, remember that this isn't a TV tuner.

  TIA

  Hello Tia

  Since last week, I got a new Qosmio F20. I want to do the same thing as you. At the moment I am not familiar with this, but the Qosmio forum, you can find many discussions on this topic.

  Try to pick up some information.

  Good bye

• Slow down the TV Tuner on my Qosmio F10

  Hello
  I have a Qosmio F10 which comes with a tv tuner. The software that comes with it to watch TV is Inter WinDVR 5 video. But the problem is that this software seems to be very slow, changing channels takes like 5 seconds to go from one channel to the other...
  Someone know how to resolv this problem? Or do I have to use other software and if so, which? (I tried to download some software on the internet, but none were compatible with the card provided with the Qosmio.
  Thank you.

  Hello

  I really never heard this kind of question. It will be interesting to know what Qosmio F10 you have. Most of the Qosmio laptops comes with edition of WMC and Qosmioplayes. Two of them allow you to watch TV programs.

  If you can give us more information on your device, please write again and if there is a solution to your problem, it will be interesting to know how you solved it.

  Good bye

• Video capture without tuner TV Qosmio F10

  Hello

  I have a Qosmio F10-101. It does not include a TV tuner, but I have composite and s video in. How can I capture any film?
  Please I really need help!

  Hello

  And which device must be the source of the video signal?

• Qosmio F10-101 does not have a TV tuner

  Hello

  I bought my F10 about 2 years ago. It is actually a F10-101. I picked the local official Toshiba site (Turkey). On the web page, he said that F10 comes with a TV Tuner (such as all the Qosmios). Also I checked it on the site of toshiba - Europe.com. The local page was actually just a copy/paste of the toshiba - Europe.com

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=98310&DISC_M OD = 1 & service = EU

  2-3 days later, I bought the computer. Since I knew that the specifications, I didn't ask questions. When I got home, I realized that there was no TV Tuner on my machine, or remote control. I called the dealer that I bought, they said that none of the F10s have TV Tuners.

  I sent to the local distributor of Toshiba on the problem, why this is so. They do not even condescend to answer. The TV Tuner functionality is also excluded from the site 2-3 days later (I also sent Toshiba International, but I was told to contact your local Distributor).
  I didn't actually buy my Qosmio for its TV Tuner functionality. But this isn't what Qosmio is made for?

  I didn't have to return to the computer dealer, because it is a very good machine in addition to its multimedia capabilities. I say "was" because of some problems of motherboard, I am facing nowadays. I'm a little start to Brown it off.

  What would you do if the same thing has happened to you?

  Hello Cagri

  It is well known that you have time to 14 days for the product if you are not satisfied. I don't know how it works in your country, but here where I live I can bring it if I am not convinced. I will also say that after buying a new product each of us should check the product, and if something is not as described in the product description, we must respond as soon as possible and dealer.

  Qosmio F10 does not work for me because it's one of the first laptops Qosmio but one thing confuses me. According to the specifications of the laptop it comes with WXP Home. Am I wrong? As far as I know to use the TV tuner you need Media Center Edition.

  Sorry, but it's really not easy to be objective enough. After 2 years is now too late for all the complaints. I just hope that you still like your toy and I have a lot of fun with it.

  Good bye

• Qosmio F50-125 - how to use the TV - FM Tuner in Windows 7

  Hello

  I use Qosmio F50-125 and I've just upgraded to Windows 7.
  Earlier, I discovered that I have a TV tuner on my laptop and I don't know how to use it.

  First of all, I don't have drivers for my TV tuner and tried to download something like v.2.3.3.31 driver TV tuner on the toshiba site, but it is not a typical setup.exe but only some files inside.

  If you could tell me a little more about how to use my TV option and how to install the correct drivers, I would be really grateful.

  Thanks in advance!

  After you have extracted the files you get the folder with other files
  I assume these are files required by FM tuner driver.

  Now you need to go to Device Manager, must mark the FM tuner (possibly unknown device if the driver is missing) a duty to install/update the driver.
  In your case, use the Advanced Setup.
  This allows to point to the files extracted.