Qosmio F10-136 - no sound after installing WXP Pro

Similar Questions

• 30 - Qosmio F-113: no sound after installing WinXP Pro

  I installed Windows XP Professional on my Qosmio F30-113 (preinstalled system is WinXP MCE).
  All devices work properly except for the audio card.
  It not there no sound anywhere, but in Device Manager, it seems, there is no problem with any device.

  I tried to install the audio driver (sound-qf30-xpmce - 51049460.zip) TOSHIBA-Center download - but after restarting Windows install tells me, that the current system doesn't support driver, which I am trying to install.

  What should I do? Which driver to use?

  Hello

  It's very strange. As far as I know that the driver can also be used with WXP Home and Pro. There is no difference. You are right on the sound card. Your laptop has an its SigmaTel STAC9200D card and the driver is SigmaTel HD Audio driver V5.10.4946.0.

  I don't know how did you install all the drivers, but I hope that you did this in the order of good facilities. The order of good facilities, you can find after downloading the install Instructions document.

• 3110CT no sound after installing XP Pro

  I am a novice when it comes to laptops, so here's the problem: my 3110 ct no sound after installing XP Pro. Had no noise when I bought it with another operating system, the report says no audio devices installed.

  Does this mean that I have to make a chip for laptop or a driver, I need & where can I find the driver or the part for this.

  Help, please.

  Usually, if the audio driver is not installed you will get no sound, but also a yellow exclamation point must appear in Device Manager.

  If the sound card chip is damage, I imagine that you will not be able to see the yellow exclamation point belonging to the sound card in Device Manager.

  You bought this Portege as a second hand unit. Am I wrong?
  So maybe the sound card is faulty.

  The computer uses an ES1978 ESS (Maestro-2E) and sound chip ES1918.
  Check if you can find an audio driver XP in internet.

• Satellite A60 - lack of drivers after installing WXP Pro

  I installed XP Pro instead of XP home with the PC.
  I can't upgrade because of the other language.
  I downloaded all the drivers of your site, but after insttallation I still have a problem with the FireWire (lack of driver).
  Then I also checked that the drivers of toshiba sure power are missing too.
  What can I do?
  Best regards

  Hello

  on the driver download site, you can download the installation instructions. Follow this order of installation. Toshiba Power Saver utility can be downloaded from the pilot site, too.

  You can also use your CD tools & utilities. There you can find all the programs and drivers for XP. Doesn't matter if it's home or teacher, the drivers are the same. But maybe some drivers from the download site are updated to a newer version.

  Good bye

• Qosmio F10-124: some problems after installing Vista

  Hello world

  have upgraded to vista premium
  on laptop with update system and card nvidia geforce 6600 graphics
  rating for graphs 1 shows no transparency at all.

  Can not find driver of common modules like the others
  and also its being played at half speed
  Windows says all devices are working correctly (do not think)

  can you help me
  Alan

  Hello

  As far as I know, Toshiba does not support and does not all drivers vista for Qosmio G, G, F10, F20.
  The Vista drivers are available for G Qosmio F30 laptop
  Therefore, you will not be able to find common modules and others on the download site Tosh.

  The needs of Vista and wastes many resources of the laptop! File, the picture transparency and the Aero feature needs min on 256 MB graphic card, fast CPU and min 1024 MB of memory.
  Here are the requirements material min!

  But you should also check if the transparency of Vista (Eye Candy, magnifying glass effect) has been activated!
  To enable or disable this effect do this:

  1. right click on an empty area of the desktop
  2. Select Customize from the context menu
  3. click on window color and appearance Option
  4. check if you want to enable transparency or not.

• Satellite A80: No sound after installing XP Pro

  Hello

  Just upgraded my Satellite A80-115 from Windows XP home to Windows XP Pro SP2

  Download all the drivers for the A80 from the site and install. Everything works except for the audio driver, I have no sound coming from the speakers.

  Nothing is cut on the system.

  Realtek AC 97 Audio driver

  Tried the Patch KB888111 from microsoft but still no sound. It's driving me crazy...

  Please help me! 1

  Kind regards

  Ronald

  Post edited by: cono

  Perhaps the solution described in this thread might help:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21110&MessageID=77805

  1. download Microsoft's KB835221 hotfix
  2. Remove "Audio device on High Definition Audio Bus"
  3. install KB835221
  4. reboot the system
  5 XP automatically detects devices
  6. after that you don't need, but you can install the realtek drivers

• Qosmio F10-136 - cannot install all drivers

  I have a Qosmio F10-136.

  I recently formatted hard drive. Because I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available on the Toshiba site, but I did not install all the drivers except the wireless LAN. Most of the configurations of driver refuse to run at all, some seem to install the files, but the driver is not detected.

  Please notify.

  Hello

  Do you have what OS installed on your Qosmio laptop?
  AFAIK the F10-136 is a European model and so you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you use Windows XP, you can find the installation instructions document. Use this list as a recommended driver installation order.
  Usually the drivers must be installed first, and then Tools. You should start with the chipset drivers.

  Good bye

• Qosmio F10 - 136 and D-video output

  I have a Qosmio F10-136, I want to use the D-video output with cable SCART. I ve tried to change BIOS, VIEW the section, but through the various options it s PAL (SCART) NOT. Only PAL (S-Video), 525 p. 750, 1125i, 525i NTSC (US), NTSC (Japan).
  My BIOS version is 1.20, I've followed the instructions of the FAQ5300XK0012R01 and TSB4A00TK000MR0.

  Hello

  Is your unit pre-installed with original recovery media and if the display driver is original Toshiba designed one?

• Qosmio F10-136: straps on screen

  Hello
  Qosmio F10-136, I bought three months ago. Yesterday I get problem, only when starting (where is the qosmio logo is appear) of the computer and start the windows I have vertical straps on the screen. I can't install the graphics driver, because the office is not appear and the computer restarts by itself, and they're trying to go on the security mode, so that the computer should work without graphics driver...
  Maybe someone had a problem. Please advice.

  Hello

  As far as I know it of possible remove and install dryers in safe mode. In my opinion, you must start the machine in SafeMode (F8) and then reinstall the latest graphics driver. I found two graphics drivers for this device. One for the other for Win XP and Win MCE.
  Please visit the Web from Toshiba.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Good luck

  Best regards

• Controller drivers/video display Qosmio F10-136

  I'm in the middle of reinstalling everything on my computer laptop Qosmio F10-136. I used the Toshiba site display drivers. However, in the video controller Device Manager shows an error, and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling up and down pages in Internet Explorer is very slow.

  Also when I go to display settings-advanced-adapter graphics card properties is not displayed under adapter type.

  Someone knows what's the problem? I need to download the drivers to elsewhere?

  Thank you

  Ben

  Hello

  The graphics driver on the European driver Toshiba page works and can be installed correctly.
  I think you did something wrong.

  Try to reinstall the graphics driver again.

  Remove the graphics controller from the list of Device Manager and restart the laptop.
  Then try to reinstall the driver again. I recommend to install in the Device Manager.
  Choose graphics card, update driver, and then point to the downloaded graphics driver and complete the installation.

  See you soon

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Qosmio F10-136 VGA does not work with the INVENTOR

  Hi, I bought a qosmio f10-136, I use CAD/CAM software and when I started working on the INVENTOR he used to close, when I contacted AUTODESK they told me that my VGA is not certified for use with INVENTOR 10.0, I tried to update my VGA driver toshiba but Web site it still was usless, is there a solution for this problem?

  [Edited by: admin November 13 05 10:25]

  Have you tried to run the program compatibility Wizard?

• Satellite A30 - impossible to get a sound after installing XP

  Am not able to get sound after installing XP. Drivers from the Toshiba web site do not help. Does anyone have an idea on this issue. Thank you

  Hello

  It's old model of laptop, and all pilots must work. I'm sure you make a mistake. On this old notebook, you must install Windows XP Home SP1 edition and after doing this install all patches software, driver chipset, driver and driver sound to the less rated. The sound should work fine.

  If you have laptop model please download the drivers from the EMEA support page http://eu.computers.toshiba-europe.com

  Good bye

• Satellite L350D - 12 M PSLE0E - no sound after installing Win XP

  Hello

  I installed Win XP SP3 on my Tosh laptop.
  I have everything works except the sound.

  We know of a compatible for this model sound card driver in XP.
  I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.

  I'm really struggling with this one and do not want to go back to Vista.

  Reall any help is appreciated. Robbie.

  Hello

  I had the same problem with sound after installing XP everything seemed fine but no sound!

  I found a solution;
  You need to install the MS patches; KB835221 and KB888111
  These hotfixes must be installed before installing driver sound!

  But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.

  However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.

  Well, in my case it worked so it should work on your laptop too!

• No sound after installing windows on my hp 620 help 8

  No sound after installing windows on my hp 620 help 8

  I can't find your audio driver on the HP support page, but I was able to locate it, which is the same engine as yours, just the latest version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.

  http://goo.GL/0IMBd