Qosmio F10-36: drive problem HARD and Qosmio player installation

Similar Questions

• Drive problem HARD bigger OptiPlex GX520 installation

  Hello. I have a GX520 SF and I'm the rebuild as a PC for my daughter. It has a 80 GB Samsung HARD drive, but as I can fit only 1 HD in the chassis and there is only 1 SATA connector, I want to install a larger capacity drive.  I have a new 320 GB Hitachi sister (HDP725032GLA360) but when I put it in the GX520 my WOOD seems to see all 320 (could be asit receives a text string to disk rather than the bios disk interogating?) but the sys op (XP Pro) sees only 120 GB (or there abouts). I tried to partition it and no partitioning it but I can't work around this problem.  I also downloaded and installed the latest version of the BIOS from the page drivers on the website of Dell GX520. Then, the questions are:

  Can I install the 320 GB drive and get to see / use it?

  If so, how - if not, why not?

  Otherwise, and 120 GB, that's all he can see, if I partition the drive on another PC as (for example) 120 / 120 / 80 can reinstall on the GX520 will go round the problem?

  If not, then what are the options should I for a larger HARD drive (capacity / brand / model)?

  Any help or advice gratefully received.

  Thank you, Steve.

  BTW - don't have a floppy drive installed to start from, or the original recovery CD.

  
  

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• Drive problem hard m6 Pavilion

  So I have a hp Clubhouse m6 1007tx laptop purchased from Thailand...
  Randomly, it begins to freeze as hell... Every thing except the cursor stops responding for a while... happening a lot... when I tried to do a hard drive check via diagnosis hp it says SMART PTE past and short failed... I googled on this topic and founded was a hard disk problem... When checked my score with the operating system for the error, it says that errors were found and asked me to restart and I did... repair done disk check and repair twice until the 58 percent and United Nations restarted twice assumed the... It is now to repair disc error...
  really need help...

  HI @woat

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you had a problem with your computer laptop freeze.  You have run the hard drive test and the CHIP spent and not short of special and differential treatment...

  This means that your hard drive is faulty and will need to be replaced.

  Test a hard drive from BIOS

  If you can start Windows after repair I recommend to backup your personal files to prevent loss of data.

  Alternatively, you can try to get into safe mode to save your data.

  Safe mode of Windows 8

  Here is a link to System Recovery / backup / restore that has multiple links that can help you through the data backup and recovery of your laptop.

  Here is a link to HP Pavilion Entertainment PC Maintenance and Service Guide of m6. Please note Chapter 4, page 49 for recommended replacements.

  Alternatively, you can contact HP support for service options they have.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Drive problem hard dv8000 - does not recognize hard drives

  This is my first post, so please let me know if I did something wrong!

  OK, so the other day, I was working on my dv8000 when he walks just down. I turned it back and instead of properly start he told me that he could not find the operating system. Knowing that the machine was two disks in it, I swapped the primary with secondary school and always got the same result. Then, I went out and bought an external and attached drive Bay hard drive to my office. The disc was bad and kept cycling the heads. I have now bought a new HDD and the laptop is currently configured with the new disk into the main slot and the other original hard dirve I checked and it is good in the second slot. Here's my problem - when I go in the bios that the computer recognizes the two hard disks for boot options, but when I try to load XP from a cd to the laptop, it tells me that there is just no hard drives installed... What don't get me? I checked the disc for errors via the bios and the comeback test passed. I thought about formatting of readers but the bios doesn't have a format feature in what I can say. for all the intense and fine, the bios sees the readers, but the operating system does not work. Any ideas >

  Please help because this is my machine of the company and I can't keep borrowing my wifes laptop, she thinks I'm going to break this one too!

  Thank you.

  "When I try to load XP from a cd to the laptop, he tells me that there is just no hard drives installed... What missing am me?"

  Your cd does not necessarily include the required drivers. The original (MS detail) XP installation cd does not detect the SATA drives. Also some other readers can be detected, including the ATA/IDE standard. If you have your original factory CD, you could try this, it should work. You can try to install another operating system, for example. Ubuntu and see if these disk become visible.

• Drive problem hard "smart hard disk error".

  Hello, about 6 months ago, I bought my HP envy m6-1252so, and since then it has been slow til to get totally stuck showing the "blue screen" error message, a month later, I turned on and showed me the message "no device found", then I went where I bought it and they said it was a software problem. That's why the guarantee would not fix because it takes that hardware problems (I have 3 years warranty). A friend, who is a maintenance-pc professional told me that the hard drive has problems and he screwed up, he has absolutely everything deleted hard disk ensuring that it would be totally free from virus and he reinstalled windows saying that I'm having the same problem soon, I had since re - install windows all almost 2 weeks because that the problem won't let me run windows showing me the message "error of. smart disc"and it could not connect to windows. My question is how could get my replacement of hard disk without having the same answer "it's a software problem?

  Sincerely, Milton.

  Milton,

  The "SMART Hard Disc Error' returned by your computer indicates that the hard disk has failed or is about to fail. Please see test of hardware failures (Windows 8) and/or test a hard drive in the BIOS for instructions on testing your computer for a hard disk failure. If the error codes are returned or a test does not complete, please contact the official HP support in your region / country, via the Portal to support HP worldwide, to file a warranty claim.

  You will need to use the HP recovery media, you created when you first set up your computer to restore the computer to a factory state after the hard drive has been replaced. If you create your personal HP recovery media, also contact HP support in your region / country, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Troubleshooting drive problem hard 3120n

  Hello world

  I had my slimline 3120n for about a year and a half.  A few days ago, when that I start, the hard drive light flashes once, but the disc starts to turn.  I can hear the fan running and the burner works.  After trying a couple of times again, the disc finally starts.  This could be a problem with the drive, the power supply or the motherboard?  Thank you!

  Out of the deal and look inside to see if things are getting a little dusty. Clean and run without the lid for a day two ro. If the problems disappear - your problem is the heat. If so, keep it clean and wind of the case.

• How you import in names of files on drive PSE11 hard and legends?

  Pictures without file names and captions are imported into PES 11 since the hard C of my laptop drive. It takes a drop-down list where one has a selection of import. Very grateful for any assistance.

  Problem solved. Your solution has triggered my memory to check the drop down list of 'View' to ensure the Detailes, filenames, and recognition of the people have been checked. THANK YOU and I will keep your solution in mind if I have a similar problem in the future.

• Drive problem hard imminent failure!

  My "hard drive" is a 3320813AS of ST on a British flag s3624 and WARNING model: it is about to fail. Seagate advises going to a Barracuda 7200.11 and 7200.12, are these versions of replacement? or if I were to upgrade, should I go for?

  redted,

  The answers that you have been detailed and must be met as soon as possible in order to protect your data. As you say, your hard drive is a failure, and you should not continue to use it.

  The general answer is that you need to create the recovery DVD "s (only DVD + R is recommended by HP) to really protect your operating system." This is your first step.

  Not knowing your level of computer "eze" is the second problem.

  (1) Big_Dave link to 'How to' articles is all you need to physically do the work. Then do the necessary backup of all your data. The last step would be to replace the disk, reinstall the OS and then the data files.

  (2) this is the solution is simple and fast.  It's not basic built into the system. It requires time, and an external source (DVD or hard drive) to store all of your files to backup data.

  (3) my solution was also based on "how to" articles But I suggest you clone the drive and be done with it.

• Need to drive caddy HARD and coverage for Satellite Pro 6100 HARD drive

  Does anyone know the part numbers or to get a hard drive caddy and the Satellite Pro 6100 Series hard drive
  Thank you

  What caddy did you? Internal an external 2.5 USB caddy for a HARD drive or the case?
  I think that if you need a domestic framework for laptop you should order it since the maintainer authorized Toshiba in your country.
  I think that guys should be able to order something like this directly from the Toshiba store

• Start/drive problems hard satellite L305-S5899

  Hello all - happy holidays and I would appreciate assistance. I just got this laptop for Christmas, and I woke up to find this morning in a blue screen! After I calm down, shut down the computer, and he refused to restart. Shows the TOSHIBA logo, then I get a black screen with a few letters indicating that the Realtek Ethernet part, then a line seems to say a multimedia cable is not found and more lines then seems to say there was no boot disk disk.please didn't insert the startup disk. I do - then the screen took me to the two options in a gray box - Toshiba system recovery or Restore Wizard. I take the Toshiba Restore Wizard. Now, no matter what I take (Out-of-box restore or clear HD) I get an error message when it tries to action and wonder of click OK to close the system.

  If I try the system restore, it only tells me no detected WIndows...

  Say the recovery disks to hold 'C' when the power is turned on and release when the Toshiba screen appears. I did and I got a black screen for hours who have sometimes a blinking cursor, a stable cursor or anything. I tried '0' as I've seen in these forums - nothing. I can't access F8 - all I get is F2 and F12 when I boot.

  Again, the restore CD will work, but when I get to take action, I get an error message and tells me to press OK to turn off the computer.

  It OF a lemon? Is my hard drive dead to the world? -What happened? It was fine for 3 days. I use BitDeffender and scan every night.

  Still, any idea would be appreciated.

  > Is my hard drive dead to the world?

  Looks like you had a bad luck for me it s not well explained why it happened, but it looks like a disc HARD does not run correctly.
  I recommend to check if the HARD drive has been recognized in the BIOS.
  If it isn't-> then the HARD disk is dead.

  However, your laptop is new and I think you should visit your dealer and replace Notepad or you could contact the nearest ASP in your country and could ask for help.

  In any case everything should be done for free because your warranty is valid and should cover everything!

  Good luck

• ProBook 6570b: drive bracket HARD and Windows 7 due to the failure of the HARD drive - now no Internet connection

  Hello

  I had to install a HARD drive of second-hand because of failure - 4 weeks out of warranty.

  I then installed an old copy of Windows 7 2009 I had no backup discs.

  My question is how to find the good network drivers on the HP site I've tried a few and they are no be accepted.

  The product ID is H5E77ET #ABU

  BIOS 681CE worm f.45

  S/no available if necessary.

  I hope someone can help as its my daughters machine and she needs for UNI.

  BTW - a number of other drivers appears to be missing like Ethernet and USB

  You are the very welcome.

  If you live in the United States or in Canada, please call 1-800-334-5144, to order a set of recovery disks.

  Have the serial number handy to give to the customer service rep.

• Installation of windows on a drive external hard and then transfer them on laptop?

  Hi all

  Just trying to install Win7 on my friends laptop. Seen the questions and had an idea.

  If I remove the hard drive, use it as a hard drive via a caddy, completely format and delete partitions, install win7 top via USB on my laptop, if I then put back the hd on my friends laptop it will start?

  Thnks!

  Hello

  N °

  install windows 7 directly on your laptop friends for that good hardware drivers can be installed during installation

  __________________________________________________________

  and read this:

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  Here is the Vista forums

  the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Drive cable HARD and support for M3800

  Hello

  I bought M3800 no internal HARD drive, but I want to add additional HARD disk now. Buy cable HDD and support for M3800 or can I use any other?

  Thank you

  Yes indeed.  I ordered the 21YWY of HARD-drive bracket and drive HARD interposer cable DG95V from Dell, to buy a battery from eBay 61WH (Dell has not tapped into it at the time...) and an EVO Samsung 1 TB SSD drive from Amazon.  It's easy to install (even if you need a very small torx scree 3 to remove the bottom cover) and works like a charm.

• drive problem hard addiing ix4 - 300 d

  Hello!

  I started with 3x3tb in a RAID5 configuration and now improved with a record 4th of the same model. Extension went well, and I see the new size in the management of disk (as well as the header bar), but stocks still point to the old size. Tried to restart, but did not bring the EXPECTED success

  My guess is that some storage pool would need expansion, but I have not found such option anywhere. Any help appreciated

  See you soon,.

  Franky