Qosmio F10 and dual channel

Similar Questions

• Qosmio F10 and TV connection via SCART?

  I try to display on television. using the output S-video of my Qosmio F10 I have no problem. However my TV S-video entry is at the front behind the door of some panels, so it is much more convenient to use one of the inputs SCART on the back of my TV.

  I've never had problems with one of these entries SCART (it worked perfectly with VCRs, DVDplayers), but now everything I try I can't get it to work with the cable SCART provided with the Qosmio.

  How is it? is there a way I can test it there is a signal on the output in the cable SCART on my Qosmio?

  Hello

  If you want to send the signal to the TV using the SCART, you can use adapter SCART (In/Out). Google a bit and I'm sure you can find the best solution.

  You can also get the best information in some electronics stores. There you can get appropriate technical advice.

• QOSMIO F10 and play games such as the XIII or the battlefield

  I have a QOSMIO F10 with XP Home Edition operating system
  I live in Iran. I installed a professional XP on my laptop too and most of the games that he is in Iran are cracked. I have problems with games. Some games load without problem these FIFA 2005, but some of them will not load.
  Once I installed XIII in standard mode and it will not load again I installed even play clean
  then it loads only once, and now even once it does not load.
  I don't know what I'm doing?
  Please guide me.
  TX
  Amir

  Hey Amir,

  As you know, more recent games manufacturers use very sophisticated on their CD/DVD copy protection techniques and it is not always possible to circumvent these routines successfully.

  The effect of this is that the CD will not always load or run correctly. Some will complete the loading process, but will not then allow the game to run. Sometimes, the game will work but in reduced mode with no options available active game.

  Unfortunately I don't know any way to avoid this happening other than to try to get the real game CD if possible.

  Good luck with your game of :>)

• TS of HP ENVY 17-j043cl and dual channel memory

  I am very happy with my new computer laptop 17-j043cl of envy, but I see it came with 12 GB of RAM, 8 GB DIMMS and a 4 GB DIMMS.

  If I replaced the 4 GB DIMMS with a 8 GB DIMM caller, the memory would be in dual-channel mode, offering a performance gain, or this computer only supports single channel memory?
  
  More concretely, the performance gain would be sufficient to justify the effort?
  
  (Although, really, I'd probably do it if there was even the slightest advantage of performance or efficiency.) "I'm just that kind of GUY!)

  Thank you!

  Hello

  Please find the link given below for your unit specifications shows clearly your device supports up to 16 GB. And for your question about the upgrade, it will improve the performance and speed of the device.

  Link
  

• M40-101 and dual channel memory

  Hello
  can I feed my memory in dual channel mode if I have two identical? (PC2700 DDR)

  --
  Best regards
  Mateusz

  Hello Mateuzs

  It is a very interesting question. Have you already checked the BIOS settings? Is there a possibility to choose the memory Dual Channel mode?

• Qosmio F10 and receiver TV - or not in my case

  I have set up my Qosmio to receive the satellite through the cable SCART (and Yes, I changed the BIOS as described). It changes beautifully satellite channels on the TV, but does not display the image on the laptop. Have tried every combination I can think overall upward but he always said not to find a signal. All I get is a black screen, both in the editing of the scene and 'live TV '. I checked my satellite and quality signal strength and they are both good.
  Any ideas gratefully received.

  Hello tracie

  As far as I know your unit a video port and video output. Have you already checked in s operating manuals which ports are video - in ports? I'm not sure but cable SCART is no plug-in software component video port. If you want to use the TV tuner, you can use S-Video port, Composite or coaxial in antenna.

• Qosmio F10 and external LCD

  I want to be able to get out my screen VGA Samsung 323 t its best resolution is 1280 x 768 is possible to get this resolution out of the F10? The nearest running 1024 x 768 (1280 x 720), but is noticibly infirior to my 1280 x 768 required.
  Any ideas?

  Hello

  I don t think that this resolution is possible on the F10.
  In addition the drivers for this device you will only find on the cd or on you site Web from Toshiba.

  Concerning

• Qosmio F10 and WinDVD Creator: capture unrecognized devices

  A similar problem in a previous post, but the proposed solution does not work. I am trying to record from VCR using the creator, but it lists no capture device, despite video and audio going OK on composite in. I have to do to get to recognize the entries?

  [Edited by: admin on 12 February 06 18:49]

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9908

  very interesting discussion on the record a video on a DVD.

  Good bye

• How to connect the external Qosmio TV and VCR

  I'm nowhere with this are there instructions written on this.

  Best regards Walter Bisset

  [email protected]

  [Edited by: admin]

  Hello Walter

  I put t know what Qosmio model you have but as far as I know everything is described in s operating manuals. One of my friends has a Qosmio F10 and I checked manuals s use of his unit and in the page 154 (9-13), there is description how you can connect to external TV using S-video output port.

  Good luck!

• Qosmio F10 is always hot

  Hello

  I have a Qosmio F10 and my problem is that the fan runs all the time because he's hot. "I am obliged" to the low and fixed frequency to solve that. But in normal mode it heats up, even if I only surf on the Web.
  What should I do?
  You have an idea?

  Hi benlog

  To my knowledge, books are of high technologies and machines of many parties in the products of the unit a lot of heat. For example: graphics chip. I put t now how you use the laptop but it is recommended to use it on the desktop. On this way, the cooling fan can work properly. Secondly, a lot of background processes running on the device. Processor must therefore operate with higher performance and produce more heat.
  Moreover, my machine is also fairly warmly.

  Best regards

• Qosmio F10: No IrDA in Device Manager

  Hello

  The IrDa device is not in my device manager over on my Qosmio F10, can someone please tell me how to get it back.

  Hi Ronnie

  I found some information about the Qosmio F10 and the IrDA is not available on this device. In this case, you can see t the IrDA in Device Manager and it s not possible to activate this function. :( Sorry

  Best regards

• My Qosmio F10 key

  Hello

  I have a laptop Toshiba Qosmio F10 and 2 fumbles is broken. I want to know how much the repairs would cost. I found on ebay a grope 'Toshiba EN 6100 or 6000 '.
  They are the same and those that meet the Qosmio laptop.

  Thank you

  [Edited by: admin August 28 05 07:59]

  Hello

  In my experience, almost all of the keys are the same size. So I think that the 6000 keys must fit into a Qosmio keyboard. And key replacement is very easy, you can do it by yourself. Just remove those broken and push down new keys.

  Good bye

• Qosmio F10 does not start system missing or damaged

  I have a Qosmio F10, and I use all the proper procedures for RECOVERY DVD-ROM PROUDCT.

  "I did all the necessary readers updates as well, but when I turn on the laptop came with an error message:" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  "Windows was not start because the following file is missing or damaged:

  So, now my computer with startup options start, but what that you choose the system starts again and again...

  What to do? Please, I beg you.

  Hmmm usually after using the CD recovery Toshiba, everything should work ok.
  I read on some computer expert sites that this problem could be linked to the hardware failure. The HARD drive or the module memory is possibly corrupt.

  I would first recommend formatting the entire HARD drive (remove also all partitions).
  Install the operating system again.
  If it does not solve this problem you could check if it is possible to install from the original CD of Microsoft XP.
  Further, you can see the memory modules. Try to remove one and use only one or replace it with a new one.

  But please note that these are just my suggestions and I m not 100% sure if these proposals will allow you to solve problems. In any case it s worth a try

• Qosmio F10-101: after change of graphics output d-video card does not work

  Hello
  I had a problem with my qosmio F10 and after service, changed the graphics card from Nvidia Geforce 5700 6600. But when I tried to switch the LCD for the TV screen, I could not use my d-video out (SCART nb exit). I could not change display properties TV format because these settings the value NTSC and shadow. You have an idea? How can I solve this problem before the service...
  Thank you

  Hello

  The G10 has installed the utility of development of Toshiba and this tool has controlled the TV out put and the PAL, NTSC settings.
  Check if it is available on your Qosmio F10 and change the settings if necessary.

  Furthermore, it would not be a bad idea to access the BIOS and check if there are any options that can move from a PAL, NTSC

• How to start IrDA by the BIOS on my Qosmio F10?

  Hello

  I have a Qosmio F10, and I read that the port IrDA does not start by the bios at startup, but by the operating system.
  How can I do to start my IrDA port with the bios at startup? Is this possible? Cause that will help you a lot

  Another question, yesterday I've post a message on the Linux driver. When I ve clicked on "post message" I ve got a message "this message must be approved by a moderator" but, I do not see my forum topic, but why yesterday, my topic was to be accepted by a moderator and today my topic doesn't have it?

  Post edited by: benlog

  Hello

  It is not possible to make some changes on the IRDA port in the BIOS. If the IRDA port is available on the machine, the operating system can recognize automatically. As far as I know that the infrared port is always enabled for communication with the other device that has obtained permit port IRDA.

  Good bye