Qosmio F10 can't burn DVD + R

Similar Questions

• After the last update can not burn DVDs

  Current enforcement 10.11.4 on Imac I5, end 2013 with external dvd player from Sony. Always had trouble make him start to burn but now can't burn DVDs at all. Get connection errors, low connection errors and even several icons on desktop DVD. 14 with good quality dvd using toast. USB is connected to the directly to the mac. ResetPRAM, transported to various ports usb. Sometimes dvd will go up but not available or when you are ready to burn receive error messages. Before last update worked most of the time. Such a simple tsk, which has always been a test since the disc removed.

  Try reinstalling the toasts with the connected reader.

  If this does not work, try resetting the SMC: reset the management system (SCM) controller on your Mac - Apple Support

• Media Player - can't burn DVDs its request to connect a burner?

  I can't burn DVDs of windows media player to drive in the drive, it says to connect a burner and restart?

  If you create a DVD for data backup purposes the following
  Freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://CDBurnerXP.se/

  (It's a free app
  to burn CDs and DVDs)

  CDBurnerXP create data disc
  http://CDBurnerXP.se/help/data/compiledata
  (the green bar at the bottom of the screen
  turns red if you add too many files)

  If you create a video DVD to play in a free-standing DVD
  Player of the following freeware may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Good luck...

• Qosmio G20: Can't burn CD but only DVD - power calibration error

  Hello

  I am having trouble, and I think it's very strange.
  I can't record audio cd or data!

  I used sonic reducer, like nero, like windows media player... tried 3 different brands of cd'r and I can not burn audio or data files in one of these... But... I can burn DVDs... it's very strange right?

  PS: when I record with nero, I keep having this message on the relatory of the engraving: 'power, calibration error' but only i when I try to burn Cda´s... DVD recording has not this problem

  I have to update some drivers?

  Please, any help would be great, or I'll have to make a big trip to resolve the problem on the laptop store.

  concerning

  Hello

  I'm afraid you will have to make a trip: (m
  Information about the burning process was very useful.
  This confirms my fears.
  In my opinion there is not a lot to do and the drive needs to be replaced. There is a power calibration error. This happens if the lens can not calibrate correctly. If you use different media the lens must be calibrated every time before the combustion process will begin.

  I think that you will need to contact the Toshiba ASP in your country

• Qosmio F10: Cannot read all DVDs recorded on JVC DVDRW

  I have a Toshiba Qosmio F10 in general I am very satisfied with the camera, but... I don't no why I can't play SOME DVD saved on my DVDRW JVC home and not in others, it's driving me crazy, no matter who else has this crazy situation, any suggestions would be most appreciated, as I add another HARD drive to this unit, 60 GB seems a bit small for a work of TV/DVD etc.

  Thank you very much, keep up the good work Toshiba ;-)

  Hello

  What you mean exactly with some DVD s? There is a specific difference between s DVD? Do you use several virgins DVD s from different producers?

  As far as I know you can built in 100 GB HARD drive.

• Qosmio DX1210 can't burn CD

  Hello

  I have an i5 DX1210 all-in-One, which has a BD - ROM.
  My problem is, it will read CDs and DVDs and I can Brown on DVD but I can't CD Brown

  She did it for the new, it makes no difference if I use
  3rd party software or is it not still comes up with an error when burning
  CD, and tried on 4 or 5 different brands of CD and
  always the same result.
  I tried the link as suggested on another toshiba below site, but it makes no difference.

  Any advice would be appreciated.

  [http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us]

  Spida

  Hello

  Have you tried format CD R TDK?
  I had problems with writing data to CD and DVD. I tried the TDK R and they worked fine

• Satellite A50, I can't burn DVD

  Hi all
  I can't Format DVD?
  And I can't the DVD Burning?

  Note: I have the Toshiba satalite A50 model
  and it is having the writable DVD.

  Help me please... Thank you

  Hello

  What model you exactly (for example, I am very interested in Satellite A50-111). But anyway if your mobile is correctly installed since your recovery CD or DVD it should be no problem.

  Please check in Device Manager if there is some hardware problems with your DVD/CD drive. You have a DVD Super Multi drive and it is possible to burn them all.

  Have you installed a software burn? Have you tried to format the DVD - RW, DVD + RW and DVD - RAM?
  What are your tried exactly?

• Equium A60-155: can I burn DVDs?

  Hello, I have an Equium A60-155.

  I can burn Cd fine, but I want to edit some images from the video camera on DVD.

  It is said Multi-graveur of DVD RW on the side. It means that I can write on DVD.

  Any help would be appreciated

  Hello

  @dns
  The satellite was delivered with the DVD-CDRW combo drive.
  According to the information, you can't burn it to DVD.

  @beatpoet:
  Each Toshiba laptop was delivered with the burning software like drag - drop or a Sonic Record Now.
  I use Nero. It s a great application and I m very happy.

• Qosmio G10-133: cannot burn DVDs more

  Since the first day I was never able to record on a DVD. I've tried many discs. Different software. I get that day, but when the deer of burning starts, he discusses the creation of a newspaper report. Any ideas.

  Do I need a new rom?

  Hello

  I guess it was possible to burn DVDs to the start time.
  Well, it's not easy to say why it doesn t burn DVD media.
  Sometimes, perhaps because the wrong lens calibration.
  But in this case, you should replace the disk.

  Also a non compatible DVD media could be responsible for these issues.
  Please see the manual for the DVD compatible and tested.

  You can also try to remove the drive from Device Manager. After restarting again the operating system should recognize the drive again.
  Then check if it of possible to burn DVDs

• I reprogram my computer and now I can't burn DVDs or play DVDs.

  original title: I reprogram my computer and now I can not bur dvd or read DVDs.

  A virus got into my computer and I had to reschedule. I can no longer watch DVDs on my pc. I use to as nero softwere. is their anyway I can restore the memory of computers? How can I fix?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• When I click on burn DVD it asks if I want to save, and I've already registered. How can I burn DVD

  After finishing a movie that I save it.  When I want to burn a DVD and I click the icon burn he wants re-register me which takes a few hours.  How can I burn a DVD after that I have recorded previously.

  After finishing a movie that I save it.  When I want to burn a DVD and I click the icon burn he wants re-register me which takes a few hours.  How can I burn a DVD after that I have recorded previously.

  ==========================================================
  Have you created the movie in Windows Live Movie Maker and WIndows DVD Maker?

  Maker_try of If_Movie to save the project in the. WMV format to a folder on your hard drive
  drive, then import them saved. File WMV in Windows DVD Maker.

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

  Depending on the length of the video... DVD Maker can take a long time to
  encodes the video and burn the DVD.

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• Can not burn DVD (s) in Adobe Encore

  Hello. I can't be able to burn DVDs in Adobe Encore. "Access denied" is the error that keeps popping up. I imported the mpeg transcoded file and timeline he successfully. The project has passed the check but when I ordered to build again, he failed. I still used successfully before that. How can I make it work again? What I am doing wrong this time?

  You will probably need to log on to an Admin account and still run with administrator privileges.

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Qosmio F10 other software broken DVD

  Hi all
  I was wondering if anyone kind enough to help me. I had to format my computer recently and reinstall everything. However, I managed to sit on one of the disks that was lying on my bed in time and it has broken. His Addition (PMR400262EU0) software CD. The problem is that the reader toshiba Intervideo WinDVD specific build for Qosmio engine software is out there and you can not download from Toshiba Web site or Intervideo.

  Problem is my laptop is refurbished and a year ago, I contacted the retail store, I bought and no help, thoshiba also contact support and they cannot help me either as software does not under warranty and they are used to replace it. So I was wondering if someone could send me a copy as evidence, I have the dvd - rom of origin that I broke. I could send a picture of it or the real thing with a blank dvd if necessary.

  Thanks for your help and best regards,

  Alex

  Unfortunately, the OEM Toshiba software could be bundled only with the laptop and cannot be exchanged or shared.
  You can order this CD at the Toshiba service partner. Of course, the CD and DVD are not covered by the warranty, but you can buy it. I think that you need some good.
  However, it should be possible to buy the CD and I don t think that s dear

• I can't burn DVD with movie maker window

  I use windows vista, and until very recently, I had no problem with windows movie maker.  But during the past year, whenever I try to burn a dvd, it burns at about 40 percent or more and then all of a sudden, it will say 'cannot complete the dvd, 'unknown error'.  Are there any suggestions as to why this might be happening?

  Hello whalelover,.

  You can try the problems Troubleshooting Microsoft listed here for problems with burning CD/DVDs .
  There is an automatic FIXIT who will scan your computer and fix problems that he sees.

  If this does not help, it may be a problem of encoding and you don't have the correct Codec to hole in Movie Maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think