Qosmio F10: Driver Installation does not detect the wireless network card

I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

I still don't the card wireless not yet installed. This happened to someone else?

I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

Thank you very much

Sean

Hello

you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

Sorry I have no other idea.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite sometimes does not detect the wireless network

    Hello

    My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

    Hello

    Well, in most cases the WLan driver update could solve this problem.
    In addition its advised to check the firmware of the might of Wlan router must be updated as well.
    I recommend also to reset the settings of the WLan router and set it up again

    Another idea; Disable the save option in Win 7 the power supply WLan management

    Welcome them

  • Windows does not recognize the wireless network card drivers

    I have a laptop Compaq nx9010 XPsp3 I runnings tried to install the drivers for a laptop of Belkin F5D8011 wireless card.
    I downloaded the correct driver in the downloads folder, but when I point the driver update wizard in the file I get a message telling me that there is no driver in the folder files. Belkin were not very useful, they just gave me a link for the driver.

    Is that mean that the driver is not suitable for XP, even if Belkin says it's? Is is possible to install the driver, without the help of the wizard? Is there something wrong with XP (newly installed)?

    Perhaps the file is a. EXE which must be run to install the drivers?

  • HP configuration wizard does not detect my wireless network.

    Hello

    I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

    Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

    All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

    I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

    I tried the following: -.

    -Rebooted router

    -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

    -Created a new comments system.

    -The router is configured to run g and n network.

    -The network names have any unusual characters.

    -Tried to enter the name manually.

    USB printing is fine.

    Is there something about the installation wizard that can not locate networks?

    OK, on the front of the printer, go to wireless menu and restore the default settings.

    When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

    Be careful with the comments network, if your computer or printer connect you will not be able to print.

  • I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

    I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

    Hello

    Make sure you have the latest network adapter drivers fron toshiba

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    and if windows update is at the origin of the problem change how to get updates to uncover the problem update

    When you have found the issue, a right click on it then invited uac then hide

    read the information on the link below

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • Satellite Pro C660-1NQ does not detect the WLan network

    Hi guys,.

    We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
    I checked the Device Manager and the wireless card does not show here.

    I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

    Any ideas as to what I can try next?

    See you soon,.
    Ash

    Hello

    It seems that the laptop would support the Wlan Atheros 802.11agn card.
    Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
    If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
    I hope this helps to detect the WiFi chip!

  • Satellite 5200 903 does not detect the wireless adapter

    Hello everyone,
    I wonder if anyone can switch me to it...
    Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
    Also the light of the flexibility wireless no longer not.
    I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
    Any suggestions?

    Hello Juliana

    The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

    Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

    If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

    Good bye

  • Equium P200 does not recognize the wireless network with Win XP card

    Dear team

    I recently installed windows XP on my Equium P200 (he had originally vista).
    Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

    Thank you

    Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
    I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

    Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

  • Portege M200 does not detect the Modem PCMCIA card

    I have the Portege M200, when I insert a PCMCIA card (LAN or wireless) the pc detects it ok but if I insert a modem PCMCIA ANY, as a standard 56 k modem, modem card v620 air verizon or a sierra wireless aircard 710, the pc does not detect any, nothing happens when I put it in or out.

    V620 Verizon is the card that I have to make it work as soon as POSSIBLE, others, I used for the test, it seems that modems do not work for some reason any on the PCMCIA.

    any help?

    If the WLAN card manufacturer supplied driver with this card please read manual how to install it on the right track. It is possible that the driver must be installed first.

    Sorry, but my opinion on the laptop PCMCIA port is OK and if you need support try to contact the manufacturer of the card. They should have enough experience with own products.

  • HP 15-D103TX computer laptop problem: Windows does not detect the dedicated graphics card

    Hi all

    I recently bought a laptop HP 15 - D103TX , which is held responsible for Free on BACK. I have updated my Windows 8 operating system and have installed all the drivers from the HP website. The laptop has dedicated 2 GB Nvidia Geforce 820 M graphics card.

    But when I checked, I found that Windows displays the graphic memory dedicated only 0 MB.

    As you can see in the screenshot, it shows as 0MB dedicated graphics memory.

    Anyone can clear me, upward on this subject? Is it a driver problem, or what is Windows 8 going crazy.

    Thank you very much in advance!

    Kind regards

    Brahmnoor

    Okay, I found the solution. In fact, the Haswell Intel i5 processor that my 15 HP D103TX has also comes with an Intel 4600 GPU intregated. So when I do normal tasks, the GPU intregated works, so Windows does not display the NVIDIA GPU 820M, but when I play a game or doing intense graphics work, he switches to the NVIDIA one.

    In fact, it makes sense, because it preserves the battery of the laptop.

    Credit: found this solution on the NVIDIA support forums.

    https://forums.GeForce.com/default/topic/664986/GeForce-700-600-series/dedicated-memory-not-shown-/

  • Dell 7 venue does not detect the external SD card

    Hi team,

    Recently, I bought a Dell Tablet conference 7. It works very well. But there is a problem with external memory card slot, it is not able to detect the external memory card. I tried a lot of cards, all are working well in other devices, but it is not detected by my tablet. I tried my tablet as well as formatting SD card, but is still no use: (.) Please give me a solution...

    Kind regards

    Chaitanya

    Hello friend

    I also have the dell site 7 16 GB, but never fell on these issues, except when I tried to upgrade my sd card 16 GB class 10 (san disk) to 32 GB class 10 (kingston). When I put the 32 GB it does not detect, so I tried my 16GB and everything was back to normal.

    Maybe it's the inability of the dell site 7 in support of the higher upper memory class ability cards.

    My dell has also supported 32GB sandisk hybrid pendrive, this USB key with both ends... called dual player... key USB OTG of IE

  • Windows XP does not have the wireless network key.

    original title: Windows XP. A Wi - Fi connection

    I have windows XP. Then when I connect to the wi - fi network secure, it should ask me password, but it doesn't. How to fix this?

    Hello

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, it looks like Windows XP will not ask for the password.

    However, we need some more information about the issue to help you better:

    Please help me to answer these questions.

    1. what type of encryption do you use on the router?
    2. do you have the latest drivers for your wireless network card?
    Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.
    a. click Start, then select run.
    b. in the Run dialog box type ncpa.cpl and click OK.
    c. right click on the wireless network connection iconand select Properties.
    d. click the Wireless Network tab
    e. click on the Properties button next to remove it.
    f. click on the authentication tab, and clear the enable IEEE 802. 1 x authentication for this network check box.
    g. click OK to Update the settings.

    In addition, visit this link for reference:

    How to troubleshoot wireless network connections

    http://support.Microsoft.com/kb/870702

    I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

  • ESXi does not recognize the PCI network cards

    Good afternoon-

    I am trying to add a few new ESXi hosts to my virtual machine environment and I want my NIC integrated with the PCI NICs for tolerance to failures of the team.  ESXi is not to see the PCI network cards.  I can't find a way on how to add them to the host.  Add network cards in VC shows just the cards integrated network, the same as the ESXi console (or what there is of it).  What I'm missing here?  Thanks in advance.

    Server = PowerEdge R710

    Is what model of network interface cards?  You may need to install drivers for them - http://downloads.vmware.com/d/info/datacenter_downloads/vmware_vsphere_4/4#drivers_tools.

    Dave

    VMware communities user moderator

    Now available - vSphere Quick Start Guide

    You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

  • Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

    Hello

    This is my setup
    Computer: Satellite Pro 4600 model ps460e 02hyt en
    Operating system: Windows XP SP3
    Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

    My problem:
    The operating system has been improved in win 98se to windows XP SP3.
    The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
    Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

    Please I wait your help

    Thank you

    [email protected]

    I imagine that it will be compatible with SP2 well. You can test it please and post the result?

  • Portege 3490CT: operating system cannot detect the wireless network card

    Hello
    Portege 3490CT with windows XP

    Problem: Try to install the wireless lan card. Windows is not able to detect the new hardware.
    Details of LAN card are NETGEAR 54 Mbps, model WG511v2

    Specifications for lan card
    It is 16-bit PCMCIA and CardBus 32-bit compatible and works in any available PCMCIA or
    Location CardBus. IEEE 802.11 g and b standard wireless technology.

    Specification for laptop Portege
    PC card slot supports two Type II or Type III PC cards; R2.01 PCMCIA, CardBus, PC Card16

    all tracks on this will be very useful
    Best regards
    Ashwani

    Hello

    What the BIOS has been installed on your laptop?
    If you use the Toshiba BIOS so there could be an option called configuration of the device.
    (it s is available on my Satellite)

    You change the option for all devices, you will be able to change the PC Card controller mode. I think you should play a little with this option.
    In other cases, the user was able to resolve a similar issue by changing this option.

    Please report if you re successful because it would be very interesting for me.

    Good bye

Maybe you are looking for