Qosmio F10 - drivers help needed

Hello

I tried to install the drivers from the site Web Tosihba, but unable to install the following:

Multimedia Audio Controller - SoundMAX Integrated Digital Audio

PCI\VEN_8086 & DEV_266E & SUBSYS_02531179 & REV_03\3 & B1B FB68 & 0 & F2

PCI modem - TOSHIBA software Modem

PCI\VEN_8086 & DEV_266D & SUBSYS_00011179 & REV_03\3 & B1B FB68 & 0 & F3

Video controller - NVIDIA GeForce Go 6600

PCI\VEN_10DE & DEV_0148 & SUBSYS_00051179 & REV_A2\4 & C3FA7 266 & 0 & 0008

Please I ask for help in installing the drivers for toshiba F10

Help will be very appreciated.

Thank you
Ronaldo

Hello

Download drivers for supported operating systems that you can find on Toshiba page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Qosmio F10 is old model of laptop, and you can find the drivers in the ARCHIVES.

You will find there?

Tags: Toshiba

Similar Questions

  • Qosmio F10: new battery needed

    My name is Batool Mohdhir, I was wondering if you could help me with something, please. I have a toshiba Qosmio F10 and I need new batteries that my batteries are ruined for some reason any! the model # I found written on my battery Li-ion battery model is PA3285-2BRS. I found on several sites in the same farm, except that its 1BRS. I don't know what that means! It is suitable for my laptop or is it not? If not, where can I buy the model I need online? What websites is the best to buy online laptop parts? and also I need an adapter model PA-2521U-1ACA, but I could not find. What other adapters are suitable for the Qosmio F10? I'm looking forward to your hearing you soon.

    Hello

    At a first of all welcome to the Toshiba Support forum. I hope that you will find here information quite useful.

    Back to your question: I checked the Qosmio specification and there is that your device needs to follow the described parts:
    Power adapter - PA2521E-2ACA or PA2521U-2ACA (90W)
    Battery - PA3285U

    I put t know in which country you live but if there is no Toshiba service partner you can order directly by them. Another way to check if you can find some offereor online in your country where you can order the parts you need. I'm sure you can find some not Toshiba universal AC adapt, but I prefer the use of original parts.

    Bye and good luck!

  • Qosmio F10 drivers/BIOS - level installed

    I just bought the F10 - nice, but there are a lot of problems... Does anyone know where to find the levels of the drivers & BIOS that are installed in your machine? I want to make sure I have the latest - as have some backlevel drivers can cause problems. There is no need to download the drivers of the database if you already later!

    Thank you.
    Mike

    "C:\Program Files\Common Shared\MSInfo\msinfo32.exe Files\Fichiers"

    will give you information on your system

    and "C:\Program Files\TOSHIBA\PCDiag\PCDiag.exe" you will all give the toshiba info: serial number, bios...

    I hope that I answer

  • Y460 update drivers Help Needed

    Hi, I tried to update my drivers recently on my Y460 and receive errors so I hope someone can help.

    I'm running Windows7 64 bit with the HD5650.

    Video card driver

    I run that in4vdo08ww5.exe downloaded on drivers Lenovo website. I get a pop-up box saying: access denied.

    Then it moves to install Catalyst, I have already installed. Tried as an administrator and the error message does not disappear.

    Current version of the driver is 8.752.0.0

    [edit: I was able to update my BIOS]

    BIOS

    Trying to Bios Flash using WinPhlash64.exe extracted from the 27CN71WW64 file. I get this error message:

    BIOS update failed! Failed to flash the BIOS image:

    WINFLASH64 does not work! Please insert AC / DC (greater than 30%).

    BIOS is not flashable.

    Error code:-144

    Thanks for any help.

    Possible windows authorization number. Delete the folder that the installation file to extract the files, try again.

  • Need Windvd 5 for my Qosmio F10

    Hello

    I have a Qosmio F10... a Japanese... I live in Turkey and formatted my f10... Now, it is English but I don't have programs like Windvd and dvr... .and I can't watch TV in windows XP... Please someone help me... I need windvr 5 for Toshiba (in English)...

    Thank you

    Hello

    WinDVD WinDVD Creator applications are part of the recovery image and may not be downloaded or installed separately.

    You can also use other applications to watch DVDs like PowerDVD or something similar. I suppose your option of Windows isn't MCE and in this way, you need other applications to watch TV. I'm not familiar with TV tuner built in Japanese units, but I heard that Japanese units have TV tuner that can be used all over the world.

    If you have the solution to this problem please let us know.

    Good luck!

  • Controller drivers/video display Qosmio F10-136

    I'm in the middle of reinstalling everything on my computer laptop Qosmio F10-136. I used the Toshiba site display drivers. However, in the video controller Device Manager shows an error, and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling up and down pages in Internet Explorer is very slow.

    Also when I go to display settings-advanced-adapter graphics card properties is not displayed under adapter type.

    Someone knows what's the problem? I need to download the drivers to elsewhere?

    Thank you

    Ben

    Hello

    The graphics driver on the European driver Toshiba page works and can be installed correctly.
    I think you did something wrong.

    Try to reinstall the graphics driver again.

    Remove the graphics controller from the list of Device Manager and restart the laptop.
    Then try to reinstall the driver again. I recommend to install in the Device Manager.
    Choose graphics card, update driver, and then point to the downloaded graphics driver and complete the installation.

    See you soon

  • Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

    Hello

    I am the owner of a Qosmio F10 with Win XP MCE.

    I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

    The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

    The problem also occurred with other devices that is my Ipod.

    The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

    Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

    Please note that I cannot go into 'Control panel' I get an error message and closes the window.

    I hope someone can help me.

    Best regards

    Green tentacle

    USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
    What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

    Reboot the laptop.
    After restarting again the operating system should recognize and install again the USB ports.
    This accelerated procedure should help you

  • Qosmio F10-132 - HARD drive failure - what HARD drive do I need?

    Hello, my hard drive is down, I have to find another, on the external drive only from the web of toshiba 2.5 are available!

    the HARD disk must be an IDE? not a SATA?

    you, changed your? where to find it?

    Thank you

    Hello

    AFAIK the Qosmio F10 needs SATA drives
    I think that you should find these information in the user manual, or here in the forum, use the search option and you will get a few discussions about the HDD F10

    However, these 2.5 SATA HDD can be bought from dealers for different laptop/computer or online (online store).
    You do not need to buy a Toshiba HDD usually, you can use different hard drives from different manufacturers, but the plug of HARD drive be right!

    See you soon

  • Qosmio F10-136 - cannot install all drivers

    I have a Qosmio F10-136.

    I recently formatted hard drive. Because I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available on the Toshiba site, but I did not install all the drivers except the wireless LAN. Most of the configurations of driver refuse to run at all, some seem to install the files, but the driver is not detected.

    Please notify.

    Hello

    Do you have what OS installed on your Qosmio laptop?
    AFAIK the F10-136 is a European model and so you can download all drivers here:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If you use Windows XP, you can find the installation instructions document. Use this list as a recommended driver installation order.
    Usually the drivers must be installed first, and then Tools. You should start with the chipset drivers.

    Good bye

  • Qosmio F10: How to get help "wake up on Lan.

    Anyone who manages to get working on a Qosmio F10 WOL?
    I found that the power management tab is missing from the properties of Intel (r) PRO/100 VE. Therefore cannot check the "allow this device to wake the computer from sleep mode.
    Read the Intel site that is said to try to uninstall & reinstall the drivers if the power management tab is missing, that I did with a new & the OEM driver, I downloaded from intel, but it did not work.
    The other parameters of WOL under the advanced settings TAB, all seem to be there.

    Before going any further I was wondering if anyone has had this works?
    If not someone from Toshiba can confirm the Bios & motherboard WOL support with built in the Lan card F10?

    Both the program HWSetup & incoming in the installation program, it seems, there is no ACPI definition of boot options.

    Thank you very much

    Qosmio f10
    BIOS 1.20
    Intel® PRO/100 VE driver for 8.0.27.0

    Hello

    On my laptop Toshiba the option allow this device to wake this computer is not accessible.
    So I think that the map network-> properties-> Advanced tab options are responsible for this action.
    On my camera, I can see awakening on the evolution of the link, ARP/Ping alarm and wake up using APM mode.
    There you can activate all options.

    In addition, you can check in the settings of ToshibaHW if the built-in LAN boot and network protocol is enabled.

  • Qosmio F10 with mainboard replaced: where can I find the right drivers?

    Hello guys,.
    Toshiba service replaced it by a new one, including a geforce 6600 gpu on my F10. So, now I formatted the laptop and I want to once again return to work. But I see that there are a few different devices, such as the 6600go gpu.

    Where can I find the drivers (lan, chipset, modem.. etc..) On the toshiba web site? If I choose qosmio F10 downloads, get the drivers for the old motherboard (and the 5700 graphics card).

    Anyone know where to find the correct drivers? Thank you!

    Hello

    Check it please THIS page.

    I assume that LAN driver chipset and driver are also the same.

  • Need new card mother/graphic card for Qosmio F10

    Where can I buy a motherboard and / or graphics for Qosmio F10?

    Thank you, all.

    Hi Karen

    I'm sure you know very well what options you have about parts of replacement hardware. Or you want to have prices, address and phone number? ;)

  • Battlefield II works lumpy on my Qosmio F10

    My question to EA:

    I have a Toshiba Qosmio F10-136 with a Nvidia Geoforce FX Go5700 128 MB graphics card but am knows the lumpy graphics, stall during the game Battlefield 2.

    The drivers are up to date that Toshiba and those embedded in the disc does not support the Go series.

    How can I get the game to run smoothly?

    Help please.
    Thank you

    This is the response from EA:

    Double-click on the C: drive
    Double-click the "Windows" folder
    Double-click the folder "Temp".
    Hold down the 'CTRL' key and press 'A' to select all.
    Press "Delete" on your keyboard and accept invites him "are you sure you want to delete these files.

    Adjust your monitors to default games of 60 hz refresh rate

    Right-click on your desktop and choose Properties.
    Click the settings tab in the display properties window.
    Click the Advanced button.
    Click the monitor tab.
    Change the list box dropdown screen refresh rate to 60 hz.
    Click apply and close all open windows.

    PATCH for BF2 v1.01 now available!
    The patch for v1.01 Battlefield 2 is now available for download. This update replaces v1.01 and fixes the memory of such leak. With this update, we've made available an unclassified update server for a file server not updated for Linux and Win32.
    http://www.eagames.com/official/battlefield/Battlefield2/us/editorial.jsp?src=communityupdate_071505

    If you need further assistance on this subject or any Electronic Arts games in the future, please visit our website and view our extensive Self Help knowledgebase, http://support.ea.com.

    Please send us an email about any significant change or development with your question.
    Thanks for choosing EA Games!
    Victor O
    Electronics Arts Technical Support

    Any news on the new drivers from Toshiba?

    Hello Norsk

    The response from EA is a standard response, and it is well known that the laptop users are to use drivers designed by the manufacturers of portable. As you know the graphics cards used in laptops are not so powerful as the desktop graphics cards. There are various reasons for this, but the most important is overheating.

    You can try to use the driver provided by the manufacturer of the graphics card, but there is no guarantee that it can be installed properly. The only thing I can recommend is to play games using the low graphics settings.

    I have the same situation with my Satellite P20, but using the low graphics settings I am able to play my favorite games.

    Good bye

  • Qosmio F10 - devices USB is not recognized correctly

    Hello
    I had major problems with the USB ports on my Qosmio F10. Everytime I try to plug in a USB device, the F10 recognizes there is only something there, but always categorizes him as an unknown device. For example, whenever I try to attach a USB mouse, he is instantly recognizes her not, even after already spending in the Device Manager and manually install a driver.

    This has been the case since I bought the laptop 5 months ago, but I can't ignore it any longer.

    I have already tried:

    -uninstall all drivers and USB controller hub and reinstall
    -ensuring that the power save to usb devices was unchecked
    -check "install anyway" in the driver signing options

    When I open the Device Manager my USB key looks like this

    -Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24 CD
    -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 2 Serial
    -Intel (R) 82801DB/DBM USB Universal Host Controller Serial - 4 of 24
    -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 7 Serial
    -USB Root Hub
    -USB Root Hub
    -USB Root Hub
    -USB Root Hub

    Any help on this is much appreciated as its driving me crazy :-)

    Hello

    The entries in Device Manager look ok.
    If the laptop recognizes the USB device, so everything is ok. If the device appears as an unknown device in Device Manager, you need a driver in particular. Sometimes, the external device needs a driver that should be supplied with the device.

    I assume you are using the Toshiba Recovery CD. In this case then phone has pre-installed all the drivers needed and you don t need the 3rd USB controller drivers.

  • Graphic problem on my Qosmio F10

    I have Nooteboom Qosmio F10! I have problems with my screen, I don't know if it is a technical problem or drivers, but I cannot read anything on it!
    All fonts and logos are somehow transformed into symbols and small pixels, I can't read anything about him so if someone could help me how to enter the BIOS and add DVD room to start him!

    If you can tell me with a photo of him and that his poosible with some directions for example

    Press ESC - F1 dhen close twice to the left then enter once down or whatever it is, I need someone to show me how to do this without seeing the fonts because I see nothing in my Nooteboom so if you run me so maybe I can get it formatted and maybe it will work better , it wont start at the end when it shows somehow the logo of the window then opens the blue screen when I try to install the drivers from the cd it asks me how to open the files of the cd rom when I give an order with explore it shows F: is not accessible has tried to install the drivers of the flash memory , but the flash stick is not recognized by pc so please if someone can help me I would appreciate it :)

    I hope I was clear and you understand me because my English is not good :)

    Thanks to those who help me :)

    You can test it with an external monitor to see if the problem will be the same?
    If so, I'm afraid there is problem with graphics card and in the worst cases, the motherboard should be replaced.

Maybe you are looking for

  • How to read the laptop temperature

    Hi allI searched TOSHIBA software Assits for a temperature gauge where I can read the temperature inside the computer, but have not been able to find anything. Did I miss something? Or do I have to install a third party software for that? And if so,

  • Satellite L300 - 16L - Vista does not load

    I have a L300 - 16L, and now, it will fail to start. When the laptop is turned on, I get two options (can not be sure of the exact text that I don't have with me at the moment):(1) start Windows repair(2) start Windows normally When I choose the seco

  • Notes on (bases) imaging with Labview

    Hello world Would you recommend any note book or a conference based on the acquisition of images (wink, grab, sequence etc.) with Labview (including how to set a buffer and how do I save images?) I've not found anything particularly interesting onlin

  • Missing pages from PC

    I re-formated my PC and went to download the latest drivers and the driver page is missing. I can still get to certain pages for the Compaq Presario SR5413WM desktop PC, but not the driver page. I don't know if this is the right place to ask for info

  • WET54G (version 1.1) and Apple Mac Mini OSX 10.4.11

    Hello I have a Mac Mini with an Airport extreme card.  I wish I had a better reception and I thougt about connecting an old WET54G on my ethernet port and switch to him of the Airport card. When I try to access the WET54G utility with the IP 192.168.