Qosmio F10 reinstall issues

Similar Questions

• Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

  Hello

  I am the owner of a Qosmio F10 with Win XP MCE.

  I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

  The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

  The problem also occurred with other devices that is my Ipod.

  The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

  Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

  Please note that I cannot go into 'Control panel' I get an error message and closes the window.

  I hope someone can help me.

  Best regards

  Green tentacle

  USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
  What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

  Reboot the laptop.
  After restarting again the operating system should recognize and install again the USB ports.
  This accelerated procedure should help you

• Re: Qosmio F10 - impossible to reinstall the sound card driver

  Hello

  Recently, I uninstalled a program and my sound card driver has been uninstalled with it

  I'm running the Qosmio F10 with Windows XP.

  I have the file to reinstall the diver in the Toshiba page but when I try to install I get the error "driver is not found.

  Can someone help me?

  Thanks in advance

  The European Toshiba driver page provides audio driver for XP and at this time, it s a 5.12.0.1.5160 version of Analog Devices Inc.

  You must download, unpack and then run the installation exe.

  If it doesn't work then remove the sound card in Device Manager, reboot the laptop and check again.

• Qosmio F10: How do I reinstall the OS from the recovery CD

  Hi all

  I anticipate a full spring clean reinstallation of my Qosmio F10.
  I have all the CDs.
  Any advice on this frightening surgery would be welcome.
  Furthermore, what happened to reactivate Windows. I read that, as it has already been saved once, it might be difficult to rectivate it.

  Thank you in advance.

  Hello

  Recovery delivered image allows simply and fast installation of the software. After the installation of recovery, you don't need to make a record.

  1. simply insert the recovery disc into the CD/DVD-ROM drive.
  2. turn on your PC while keeping the 'C' key.
  3. follow the instructions that appear on the screen.

  All that s!

• Qosmio F10 lights After Hibernation

  My Qosmio F10 starts (after about 7 hours, without me touching any button) after putting in Hibernation mode during the night. The fact that for 4 days.
  Its quite annoying. Any ideas?

  Hello

  It's very strange question.
  Energy saver is responsible for the hibernation and standby.
  I recommend you to check the parameters. You can also try to change or reset the settings.
  In addition, you can try to reinstall the energy saver. Unfortunately, there is no general solution to this issue.
  Check it out.

• Qosmio F10: Cannot set up the TV Tuner!

  I can't be able to receive any form of TV on my Qosmio F10 signal.

  I tried a manual and automatic TV signal setup in Windows Media Center, while only connected to various points of antenna and my satellite receiver, but the software manages never actually receive any form of signal.

  I checked each of the cables works properly by connecting it to a TV, and there is certainly a good signal.

  All I can think is there is a problem with my Toshiba TV Tuner hardware (I uninstalled and rebooted to reinstall drivers TV Tuner), or possibly the adapter cable little.

  Someone else had this problem?

  Any ideas?

  Ok... No one has any ideas, then!

  Here's an update... I took my Qosmio F10 at the shop where I bought and showed them the problem.

  They were very helpful and offered to test their display machine. He struggled, but finally picked up a garbled from an antenna signal.

  They agreed that my Qosmio was wrong and pulled another out of stock. We decided to check quickly to see that another did not pick up a signal either!

  As they had no more stock, I agreed to take the display model at home, because we knew that it worked.

  Since then, I only managed to get for my Sky Digital receiver by manually telling it what channel it is on (68) and have not been able to set up anything via a terrestrial antenna!

  I have connected the original problem with the technical support of Toshiba, who said that it should be referred to their team of level three, who work office hours only. I have been waiting for four days for a response and am not a happy chappy!

• Qosmio F10 does not accept my recovery cd

  My Qosmio F10 does not accept my restore cd. It will not work in windows or dos mode. In windows, I get the error message. This recovery and applications cd is not configured to work with this machine (laptop). This cd is for: Qosmio G10, Qosmio F10.
  Please use the correct recovery and Applications cd.
  I want to format this model and would really like to use the adequate recovery cd to reinstall all applications that I don't have a windows xp disc. Recovery, one is the only one I have.

  Hello Pam

  Insert the recovery media in the drive and turn off the laptop. Wait a second and turn it on. Press the C button and keep it down. On this track, the unit will start playback DVD recovery and if you use original recovery the recovery procedure will be implemented.

  You cannot reinstall the unit if the operating system is running.
  Good bye

• Qosmio F10 - the Qosmio player Partition Recovery

  I have a Qosmio F10. He had the motherboard factory upgrade, RAM max, and a new 160 GB Samsung HARD drive mounted. So far so good. I've recently updated to Win7 and it was OK, once the drivers have been found, but I couldn't reinstall the Qosmio Player because apparently he found too little space.

  Hotline do not have much help, but I now realize that the QP is a Linux package in its own hidden partition. I've cleaned the disc, which makes an image of the system W7 on a USB HDD. Then I managed on the basis of reinstall the QP and update her, but the image will not recover in the form of images of Windows, I find now, will only recover a disk the same as the original or more.

  It is not of course because of the score of the PS. So how is it removed please? I tried everything so far.
  Just to make things to complete the product Toshiba Recovery DVD sent with the repaired machine is 70% complete and abandoned.

  Stephen

  Qosmioplayer is small application based on Linux, and according to the instructions of Toshiba s, must be installed as a first step, before you install the operating system. I m not 100% sure, but about 200 MB of free space on the HARD drive is required for installation of Qosmioplayer.
  It works perfectly when you use original Qosmioplayer and recovery disks but I put t know how it will work when you try to use your own image.

  I hope that someone else has the same model of laptop and solution for this.
  If you will be able to manage this please send a feedback.

• Qosmio F10: battery life

  I have a Qosmio F10 (2 months) and am pretty disappointed with the battery life.
  20 minutes running on battery at full power yesterday and the computer was turned off (3%)...
  Forget watching a DVD on the plane!
  I wonder if it is a BIOS issue or if there is no possibility to buy a more powerful battery.
  It seems to me that this computer was designed to run on a/c with the battery pack in as a secondary power (short!) option.
  Any comments?
  Also, did anyone tried these plane Chargers sold in airports?

  Hello

  In my opinion, you should try to set up your Qosmio for optimal battery usage. To optimize the battery DURATION use the Toshiba Power Saver utility. "TOSHIBA Power Saver" allows according to the specific use power management allows the reduction of the power consumption of your device and allows you to use your PC for a longer period when running on battery.

  You can reduce your energy consumption PC mainly for its use by reducing the brightness of the screen LCD or CPU processing speed. There are also various games of management settings power or 'profiles', prepared in advance. These profiles are designed to be used in some of the most common environments of the user. You can use these standard profiles or create your own profiles based on your own custom power management settings.

  I'm sure that all the settings of this can help you to use the device for a longer time. To watch DVDs using DVD player profile. You can change the profiles using the FN + F2 key combination.

• Can not find the driver for Qosmio F10-101 TV tuner

  Hello everyone,

  I bought a new Qosmio F10-101... since he has previously installed Win XP Home, I reinstalled the operating system XP Professional... this time the Device Manager is to give a warning to a PCI device that is supposed to be the TV tuner... I'm looking for the TV tuner driver which works on XP Pro... any help is appreciated...

  Thank you...

  JUST GO TO THE DRIVER DOWNLOAD PAGE OR TYPE:
  http://support.toshiba-tro.de/tools/Qosmio/F10-G10/MCE/TV-tuner-XP-1020.zip

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Qosmio F10: Forgotten my password Windows XP - how to reset?

  Hi all

  I haven't used my Qosmio F10 in addition to four months and the last time that I used it I had to change the password, but now I foolishly do not remember it.

  My account is the only account on the laptop, so I am also administrator. Is it possible that I can find out or reset the password?

  Thank you very much

  Hello

  Cannot delete the administrator account on Windows XP. You need to reinstall new OS to get access to the new created admin account.
  Simply start the installation from the Toshiba Recovery CD and the new operating system must be installed in a few minutes.

  But note; the new installation format the whole HARD drive so if you have important files on the HARD drive you back up data.

  In this case, you could remove the laptop HARD drive and it could connect to another computer via the external USB HDD controller to transfer the files to the second computer HARD drive.

  See you soon

• Qosmio F10: How to get help "wake up on Lan.

  Anyone who manages to get working on a Qosmio F10 WOL?
  I found that the power management tab is missing from the properties of Intel (r) PRO/100 VE. Therefore cannot check the "allow this device to wake the computer from sleep mode.
  Read the Intel site that is said to try to uninstall & reinstall the drivers if the power management tab is missing, that I did with a new & the OEM driver, I downloaded from intel, but it did not work.
  The other parameters of WOL under the advanced settings TAB, all seem to be there.

  Before going any further I was wondering if anyone has had this works?
  If not someone from Toshiba can confirm the Bios & motherboard WOL support with built in the Lan card F10?

  Both the program HWSetup & incoming in the installation program, it seems, there is no ACPI definition of boot options.

  Thank you very much

  Qosmio f10
  BIOS 1.20
  Intel® PRO/100 VE driver for 8.0.27.0

  Hello

  On my laptop Toshiba the option allow this device to wake this computer is not accessible.
  So I think that the map network-> properties-> Advanced tab options are responsible for this action.
  On my camera, I can see awakening on the evolution of the link, ARP/Ping alarm and wake up using APM mode.
  There you can activate all options.

  In addition, you can check in the settings of ToshibaHW if the built-in LAN boot and network protocol is enabled.

• Qosmio F10: Question about the CD key and waste product

  I bought a laptop Qosmio F10 a year ago. However, it is only now, someone mentioned that is fails to my OS I will need to reinstall.
  They asked if I had the disc and product key. I said no. Why do not the two points mentioned above provided for me on buying?
  I'm just a user not an expert.
  All the answers at all would be appreciated.

  Hello

  It is strange that the laptop has been delivered without CD or DVD.
  Usually, you should get the media recovery, Tools & Utilities CD and possibly a Qosmio CD player.
  On the recovery CD, you will find the image of Toshiba. This image that you could install every time. The operating system on this image is already enabled and you don't need the product keys.

  If you don't have a CD you can order it from the service partner in your country.

• Qosmio F10 - devices USB is not recognized correctly

  Hello
  I had major problems with the USB ports on my Qosmio F10. Everytime I try to plug in a USB device, the F10 recognizes there is only something there, but always categorizes him as an unknown device. For example, whenever I try to attach a USB mouse, he is instantly recognizes her not, even after already spending in the Device Manager and manually install a driver.

  This has been the case since I bought the laptop 5 months ago, but I can't ignore it any longer.

  I have already tried:

  -uninstall all drivers and USB controller hub and reinstall
  -ensuring that the power save to usb devices was unchecked
  -check "install anyway" in the driver signing options

  When I open the Device Manager my USB key looks like this

  -Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24 CD
  -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 2 Serial
  -Intel (R) 82801DB/DBM USB Universal Host Controller Serial - 4 of 24
  -Intel (R) 82801DB/DBM USB Universal Host Controller - 24 7 Serial
  -USB Root Hub
  -USB Root Hub
  -USB Root Hub
  -USB Root Hub

  Any help on this is much appreciated as its driving me crazy :-)

  Hello

  The entries in Device Manager look ok.
  If the laptop recognizes the USB device, so everything is ok. If the device appears as an unknown device in Device Manager, you need a driver in particular. Sometimes, the external device needs a driver that should be supplied with the device.

  I assume you are using the Toshiba Recovery CD. In this case then phone has pre-installed all the drivers needed and you don t need the 3rd USB controller drivers.