Qosmio F15-201: old BIOS version required
Well, I changed my original BIOS and then ran into problems.
And I did not backup old.
So I need a new.
Please help me on where it is located?
This is for a Toshiba Qosmio F15 201 with a GeForce fx 5700 with 128 MB of memory.
Here is some information on my card, it's a GeForce Go 5700 on an AGP interface and coming from Toshiba which offers a NV36 chipset and 128MB memory.
If someone even card please copy bios original file and sent...
Thanks in advance.
The laptop should generally run without problem after the update of the BIOS. The new update of the BIOS is improved and I put t know why you need an older version of BIOS.
I doubt that the questions that appear on your laptop might be linked to the new BIOS.
However, if you need an earlier version of BISO then you can also contact the ASP in your county and ask for these files.
I tried now to update my bios on 4.2 32 bit
However, this result without DECO fan in windows.
My good warm sound.
SpeedFan said about 100 degrees Celsius.
If someone don't know where I can download older versions of bios.
I have a PSPA3 satellite P100-293
In the bios, the FAN is functioning normally but when windows starts the fan stops.
I tried to reinstall with XP and Vista and the problem is still there.
So I really hope someone has a url or local @ their pc file.
I tried reading the forums here and see many mistakes after the update to 4.2 either stop fan or he runs at full speed.
Thus, as a first step: 100 degrees celsius are false. SpeedFan and another of programs like this are usually 20 to 30 degrees higher then in real-time. We checked this home with another brand of laptop with a similar problem and we he measured with special equipment.
Regarding your problem: do you have that you have installed some third-party drivers from other sites? Finally, it would be a reason why the FAN won´t burp more since the VGA drivers play a really important role concerning the whole cooling system in your machine.
Please try with the original toshiba drivers or recover your machine, maybe it helps...
Hello from the Czech Republic, I have also problem with noisy fan on my new Satellite A500-1E4 (PSAR9E) (i430M, GT330M) on 64-bit Windows 7 over Office Standard - see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46719&start=165&tstart=0.
Today I have updated the bios to 1.60 (from 1.20) and there has been no change. When the laptop powered to the top of the adapter in all modes the fan is running at 60-70% (sometimes at 90% - my office is perhaps quieter :-(). What laptop power battery in normal fashion fan and high performance race to 60-70% (loud sound) and in the economy mode to 80% (very noisy). It's crazy that in economic mode produce more noise than mode high performance. The CPU temperature is cca. 37-43 C, GPU 48-57. Fans of course never stops and all it's standart office. No intensive work or games. I can't imagine in games.
Can someone help me please, I'm really helpless. Or this fixes only bios 1.30 and next version not?
I think that it of really difficult to say why this happens, but in my opinion you should provide more details about your operating system and drivers.
Are you running the Toshiba factory settings or you have installed another OS?
Fan sometimes high activity is due to a different display driver. Have you installed the latest display driver form Toshiba (NOT nvidia)?
Old BIOS versions, you can get an authorized service provider
Hi all! After the upgrade to 1.90 BIOS there is a problem with my SSD (840 EVO).
Where can I get old 1.70 BIOS?
Generally on Toshiba BIOS download page is always latest bios offers download and older versions are not available at all.
Can you please tell us what type of problem did you notice with new SSD?
Have you noticed this problem with the old BIOS version?
I can only imagine that Toshiba service provider in your country can get the older version for you. They have access to the database of Toshiba and I think they can get what they want.
I have a hp laptop AMD E300 APU 6 GB memory 64-bit computer Windows 8 2000
Just, I flashed the Insyde bios with such F.34 version recommended by the automatic Hp assistant.
Everything seems to work just fine, but when I turn on get a beep very strong after the post and before he asks for a password.
I allows me to raise less than the power tonic simple beeps and walked if there is any way I can adjust the position after a beep?
BIOS F.25 should be the old BIOS version before this update.
Download the BIOS from the link below and run this file to the system in BIOS previous flash.
Once the old BIOS is back, check that the beep is back to its usual volume.
I recently bought a Lenovo X 201 and was a bit confused when I looked and saw that the BIOS version was the one that is not yet published on the Lenovo Web site. I can only imagine the loading system technology grabbed a file from the file shares that are used during the build process which is beta. Here are the BIOS DMI data. I downgraded from 1.22.
All works in this or know what patches of 1.23 and when it will be available?
# dmidecode 2.10
SMBIOS 2.6 presents.
78 structures occupying 2863 bytes.
Handle 0x0000, DMI type 0, 24 bytes
Version: 6QET53WW (1.23)
Release date: 15/09/2010
Runtime size: 128 kB
Size of the ROM: 8192 KB
PCI is supported
PC (PCMCIA) card is supported
PNP is supported
BIOS is extensible
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
floppy 3.5 "services / 720 KB are supported (int 13 h)"
Print screen service is supported (int 5 h)
8042 keyboard services are supported (int 9 h)
Series services are supported (int. 14: 00)
Printer services are supported (int 17 h)
CGA/mono video services are supported (int 10 h)
ACPI is supported
Legacy USB is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS version: 1.35
Firmware revision: 1.17
It is difficult to say what has been changed in this version until it is officially published on the web with a full changelog.
1.23 can get ignored, too, if the new revisions are made prior to publication. He could never make it in public.
I have a Qosmio X 770 that running Windows 7 Home Premium 64-bit OS. I can't access the BIOS. Turning the power on, press F2 brings up the options "start windows 7", "Diagnosis of memory startup" or "Press F8. F8 then gives the normal safe mode options. Selecting F12 to the beginning toward the top, does nothing. The selection of some other keys at startup to replicate by pressing F2.
HWsetup allows some access to the BIOS, which allows me to change from fast to slow start and to change the boot order, but nothing I've tried so far allow me access to the BIOS before starting Windows with the exception of removal of the C drive.
The problem exists with the old BIOS and exist with the hard update. I don't know when the problem began, he did years that I finally tried to access. My most previous system restore point, for some reason, only goes back to September 2, just before I made an image of the system. Restore to this point has not helped.
I can't think of anything else that might be relevant for the moment.
I thought of something else, the Toshiba start screen does not show in a safe, Normal, or fast.
After update (BIOS 1.60) my pc do not work properly.
I need an old BIOS image. Please send it to me if you have one.
I have V1.2 for you.
A computer laptop qosmio F60-111 (pqf65e-01501mru) with BIOS version 2.10 (05/06/2010)!
When I try to install the version 2.70 (21/12/10) on windows 7 x 64, flies such error
Tell me what to do! Update is needed! Help!
Is the original version of Win7 you have with your laptop preinstalled or do you use the clean version of the OS?
Dear friends Iam using toshba laptop
Model name Satellite A300
Part number PSAGCE-00C006AR
Serial number 98020636Q
My problem is I am downgrade my system to windows xp sp3 before its vista and I'm upgrading bios 2.20, now its does not work properly problem with power... When I connect the power code system stuck... .all body have older bios please send me my Email:[email protected] sorry for my bad English please help
someone help me please...
If anyone can send any old BIOS you are trying to contact Toshiba service in your country. They have access to the database of Toshiba and they can get the old version for you.
Everyone knowes where I can get old Versions of BIOS (operating system independent) for my Satellite M70 - 181 (PSM70)?
Look for the Version 1, 00 - WIN or 1 10-WIN-in the new BIOS, there is no need for cooler adjust :(
> Does anyone know where I can get old Versions of BIOS (operating system independent) for my Satellite M70 - 181 (PSM70)?
I m afraid you won't find older BIOS versions for download on the pages of Toshiba I have found that the latest versions of BIOS.
If you want you could contact the partner of service allowed in your country and ask if it of possible to get older versions of BIOS
But look, man. I doubt that an older BIOS would support or contains a few additional options or settings that are not available in the latest BIOS.
I have a Satellite m70-340.
I'm updating my bios bios-vista-510 but after that my function keys does 't work (Fn + F1 to F12) also does work' utility t zoom, bad contact on off pilot also does ' t work :-(
Mention that I install windows Vista and then I formatted it and go back to my Windows XP operating system... then I have all these troubles.
I think that the problem in the new Bios, so I hope that someone can, please, share with me the old bios
Thanks in advance
Driver Toshiba page provides two versions of the BIOS: one for Vista 5.10 and one for XP 1.50
Both are available on the page so what's the problem?
You must choose a laptop right dude! Your Satellite M70-340 seems to be a part of the PSM70 series! Check it out!
Something more: on the page, you will also find the XP installation instructions. You must follow these steps and you need to install the drivers in this order. This is important if you want to use the phone with all the features of Toshiba!
Hello everyone is able to share the old 1.30 bios for satellite m70 151
Can you please tell us why you want to have the old version of the BIOS again? You have problems with your Satellite M70?
Only the newer BIOS versions are usually available on the Toshiba page.
If you want to install an older version of the BIOS of your laptop, you can try to contact the ASP in your country for assistance.
I inherited a R400 Prototype of one of our guys to laboratory here at the office and made the mistake of flashing the BIOS to 1.5 of Windows.
Now, I get a black screen and a power indicator light flashes.
The old BIOS was 0.6 and I can't seem to find one or even a version prior to 1.5 on the web.
Anyone happen to have a pointer to the older versions? Maybe on an FTP server, so I can try to flash?
Official website of Toshiba, you can download the latest version of the BIOS. In addition it of not possible to downgrade the BIOS.
In any case, to downgrade the BIOS, you must contact an ASP. They can downgrade the BIOS with an earlier version if you wish.
On the Toshiba site, you can search with ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
I have a Qosmio G30-201 and have had it for almost 2 years now.
Only a few weeks back I get an error message * error nv4.disp* and my system shuts down.
I used the recovery many times cd and it does not work for a day or 2
Any 1 can help please?
Try first update the BIOS and the graphics card driver.
If this doesn't help then I would recommend contacting the ASP in your country as suggested by Akuma too.
Maybe you are looking for
Just upgraded to watch OS 3 and noticed that notifications now require a tap to view details. For example, if I get an iMessage, iMessage icon is displayed on the watch, but I have to tap it to read the message. Similarly, if I get an alert for an up
I've forgotten the answer to my security questions, so I decided to reset them would be the logical thing to do. When I typed the option "Reset security issues", a message pops up saying 'an email with instructions was sent to m•••@gmail.com. Follow
What is a Windows product? If Yes, what? An apple product? What, again? What is an ipad? Or itablet & what kind? An Android? WHAT is the beast? !!! I love him, but if he said what it was, I missed or can't remember. Thank you, moonbaby
I suspect it's maybe because I have now installed VIPRERRescue7156.exe. If so, how can I disable it so that I can download the programs I want?
Hello I installed Win 7 Ultimate 64 bit (4 MB RAM) and I can not find driver for device Base System (code 28). How can I solve this problem? Kind regards Z.