Qosmio F20-132: Question on the use of the remote control

Similar Questions

• Satellite A300/Y01 - Question on the remote control

  There is a remote that comes with the A300/Y01 (http://asia.cnet.com/cnet/i/r/2008/nb/43187224/sc004.jpg).
  I want to know if I have a USB infrared for my A300/U01 Sat.

  And buy a Toshiba remote that's going to work?

  And where can I buy this remote control Toshiba?

  Hello

  To be honest I don't think you can buy it separately. As much I know this remote control is not available as a separate option.

• Qosmio F20-154: Re-activating the IrDA port

  Hi, some time ago I disabled the ir on my qosmio F20-154 port, as I saw no need.

  Now half a year later, I've forgotten how to get it (for a new laptop).
  I see very little in the manual wonder, if I need to use the remote control receiver?

  Concerning
  Hans

  Hello

  You forgot how to activate the IrDA? ;)
  As far as I know the IrDA port is not available on this device.

  Check Device Manager if there is no IrDA devices appears.
  I think that you will find nothing, because there is no such thing as the IrDA port.

  Of course, it is possible that you received an IrDA device for the use of the remote control, but you cannot use it to transfer files.

• Can Qosmio F60 - I use a wireless remote control?

  Hi all

  Is the remote wireless IR F60 support & if so how I enable it & will be all universal remote control work?
  I am using my laptop as a media center & would like to swap between functions without my intervention.

  Thanks lantana aka couch potato

  Hello

  Some of the notebooks Qosmio F60 are equipped with a remote control.
  Take a look at the front of the laptop.

  You will see the communication WLan (LED indicator
  Close the light WLAN, you should see a window of irda receiver.
  The irda is necessary to receive signals from the remote control.

  If your F60 does not support this irda you can not use remote in this laptop.

  PS: you can not use any remote. You must use another compatible which can be bought at Toshiba ASP.

• Using the remote control in parallel and touch screen.

  Hello.

  Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and has been synchronized with the touch screen. Can I use remote control when the touch screen is activated. Now the remote control is locked.

  Thank you to.

  Hello

  N ° when a codec is associated with a touch controller, it is not possible to use the remote control.

  You question No. 677 in link below

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.PDF

  BR Oleksandr

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.

• Satellite P750 114 - how to start using the remote control

  Hello

  Does anyone know how to start to use the remote that came with my makeup P750 114.
  When I press on simple volume keys + / doesn't seem to work.
  I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

  Hello

  A remote control that is included with some models allows you to perofom certain functions.
  Using the remote control, you can
  -Navigate and control the media center window
  -Check the video or live tv display
  -Place the computer in and out of fashion "Eve".

  There is a button on the remote control.
  It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
  You will find options; do nothing, sleep, hibernate, shut down.

  Hope this helps

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• Is it possible to convert the T61 system so that it can use an infrared remote control?

  Is it possible to convert the T61 system so that it can use an infrared remote control?

  Canon and many other manufacturers of consumer electronics, provides instructions on the operation of the optional accessories in the manual of instructions for the accessory.  Manual user for the primary device will usually include a page that lists compatible accessories that are available for the device.

• SX20: Definition of system using the remote control password

  Hello

  Cisco SX20 Quick Set: TC6.1

  I usually know the system password is set using CLI Web.

  But I would like to know if it is possible to set the system password using the remote control.

  If so, can you guide me.

  Thanks in advance

  Hello

  the remote control you can set the menu password, system password is not remotely possible.

  You can also set using cli commnad.

  xcommand SystemUnit AdminPassword Set Password: xxxxxx

  HTH

  Kind regards

  Dharmmesh

• Error step 7, creation of WebCenter, and schemas content using the remote control

  Hi all

  I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.

  This is the content of install_setup.log

  Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance

  Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..

  localhost.localdomain:1521:ORCL

  Installation of patterns Begin spaces

  Please enter the password(User:sys) of the database:

  Processing of command line...

  Timeout connecting to the database. Current timeout value is 30 seconds.

  UCR-6090: jump main operation: validation step connection failure

  And the rcu.log

  14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...

  14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...

  14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))

  14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))

  14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:

  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.

  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)

  at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)

  at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)

  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)

  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)

  2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure

  2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure

  Any suggestions?

  Best regards!

  Hello

  (1) you see no error on the Setup screen? If Yes please download the screenshot?

  (2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.

  Also, can you please try the following and check the box.

  Go to the location / / rcu/config /

  Take backup for the file rcu.properties, and then change the below

  JDBC_LOGIN_TIMEOUT = 30

  TO

  JDBC_LOGIN_TIMEOUT = 300

  and try again.

  Concerning

  Françoise

• Installation of OBIEE without using the remote control.

  Hello
  

  
  

  I installs le OBIEE et will use the Oracle database, but will not use the RCU. I wonder if I need of some pre -requisite to create the schema?

  
  Is there any documentation with installation create RCU schemas without?

  
  

  Thank you.
  

  Hello

  Without the remote control will not work OBIEE 11g because the remote control allows you to install certain patterns in a database that are required by median Fusion as Oracle BI EE ware products. These schemas can be installed on any certified version of database such as Oracle, Microsoft SQL Server, or IBM DB2 database. There are patterns that are required by the main components of Oracle Fusion Middleware, although there are Oracle BI EE patterns requires, as the Planner, BI Publisher, for the new product of the scorecard.

  Note: You can install it without the remote, but we must approach below.

  SATYA RANKI OBIEE REDDY SOLUTIONS: How to install OBIEE 11 g without the remote

  Thank you

  Satya Reddy Ranki

• using the remote control of the DVD does not select the correct buttons?

  Hey Ya'll,

  Project is almost complete, but I ran into one, which I think is a very simple problem...

  On my main menu, I have a total of 5 buttons on 2 rows.

  Line 1 to 2 buttons and Row 2 has 3 buttons.

  The links are correct, because they work fine in preview mode, using the mouse, but also view the version on the pc using Cyberlink DVD Viewer, once again, using the mouse to select the button.

  The problem is when you use the remote control, either on the copy engraved in the DVD player, or in preview mode, if I use the directional buttons of remote controls, that he does not want to go to the buttons I suppose it must

  (Top row left to right, then down row from left to right)

  On each of the properties of the buttons Panel, I chose the right (I guess) option number (just below name) for each button... IE top left set the right value top of page 1, 2, bottom left 3, the middle value 4 downstairs and down to the right the value 5.

  Type is set to Normal, the button name and Synch text is checked (although the No button is real, each is just a Word text, in photoshop, when I did originally the menu..)

  Also the low middle button never gets selected with the remote control of the DVD... Preview, using the buttons on the remote control, he finally gets selected, but it takes a bit of comes and goes, and the highlighted button is rarely what you would expect, since direction button your pushing.

  #1 button (top left) is set to the default button, which I want, but do not know how I set that, unless it's because it was the first button, I myself made/converted to the button)

  Here, any help would be greatly appreciated... that should finish this project!

  CB

  Cowboy Bob,

  No, what you did with the binder is actually linking these buttons to the assets.

  It shows a Menu with several buttons, icon manually road buttons depressed. Once you choose manually the buttons of road, they can change exactly what will make the remote control.

  

  As said, when you create a Menu, buttons start at # 1 and progress upward. Each Layer Set button plus up in the Layers Palette. This is the routing of the buttons Auto gets its information and it usually works. However, if you move the buttons around, removes some, etc., the en can get confused, manually their routing is the best way to go.

  Good luck and we hope this helps,

  Hunt

• Programming of the remote control

  I am able to program the buttons on the remote without problem but I have more than 60 deployed MD and would like to be able to program them all at once.  Is there a way to the DMM to write an application of advanced task that will program the remote button?

  Thank you

  Al

  Alan,

  
  

  Here's a technical tip I wrote on the programming of the remote control through the

  a HTTP mib.  Just create a task advanced under the task system

  for each color button.  Test & check if it works on a single DMP first and

  then send task for each color button to all of the DMP.  Once it is

  finished make sure you that you SAVE the configuration.

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

  
  

  ******************************

  
  

  You can use DMP MIBs to reconfigure the DMP Remote Buttons. VARIABLES =========   admin           = DMP Web Account Username   default         = DMP Web Account Password   a.b.c.d         = IP Address of DMP   dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance MIBS ==== ** Use the Following MIB to see the CURRENT Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Configure Buttons RED https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dwww.cisco.com%22 GREEN https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */MD%3Dhttp://www.google.com%22 YELLOW https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */_CMD%3Dhttp://www.yahoo.com%22 BLUE https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */%3Dhttp://www.apple.com%22 ASSIGN A BUTTON TO CAST https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22 ** Use the Following MIB to see the NEW CONFIGURED Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Save NEW CONFIGURED Remote Mappings on DMP    -> Use the ADVANCED TASK to SAVE the DMP Settings.    -> or Directly on the DMP using the DMP-DM Web Admin    -> or HTTP MIB          ie.          https://admin:[email protected]/* */:7777/set_param?mib.save=1          https://admin:[email protected]/* */:7777/set_param?mib.save=1&mng.reboot=1