Qosmio F20-137 starts only in safe mode

Similar Questions

• Windows starts only in safe mode after refomatting

  I reformatted computer my husband, during the process of re-setup the computer shut down & restarted in safe mode. I can't the computer to start Windows normally, it starts only in safe mode or at least what looks like safe mode. I am trying to install Windows XP Home Edition. I was not able to install any device to connect to the internet on this subject, so I can install SP3.

  Can someone help me solve this problem please

  Hi Malinda1979,

  Since you formatted and installed windows, its non-secure mode. Try to install display drivers. You can check if the display drivers are installed correctly click Start-> settings-> Control Panel-> system. Hardware-> display adapters. If you have any yellow exclamation next to any device, you must install the drivers.

  I hope this helps.

  * You need to install all the drivers of your motherboard / driver cd (which came with your pc), including the chipset, sound... etc.

  If it's a laptop brand / Office (HP, Dell, Acer, etc), you can visit the manufacturing site and select the model and download the latest orders.

• 13 "Macbook Pro (mid-2012) starts only in safe mode.

  My macbook OS 10.11.4 recently close and wouldn't turn on after an electrical fault at the club I was DJing. The next morning, I disconnected the battery and plugged it back. When I turned on the PC, he gave the kernel panic and would only turn on in safe mode. I tried to go to recovery (command-R) mode, but that does nothing, when I start my computer.

  What happens here? How can I fix? Help, please

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Computer starts only in safe mode

  I went to stop my dell studio 1737 last night and it is stuck on "shutting down" and so finally I used the power button to turn it off, and now it will only start in safe mode or safe mode with network.  My restore disk is in stock somewhere as I just moved it background.

  Can someone help me solve this problem without the ERD?  I made the diagnosis and it passed everything.

  Hi KDWilson,

  1 did you recent hardware or changes to the software of the system?

  2. you receive messages or error codes when you try to start in normal mode?

  Because you can start in safe mode, you can try to perform a system restore and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following links:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Windows 7 starts only in Safe Mode after serious Trojan virus. Help, please!

  Yesterday, I got a trojan, Anti-Spyware Soft virus accidentally. I'm confident enough, I removed the virus (removed from the registry, ran Malaware which found other cases of the virus attack), but now my computer will only start in safe mode.

  I made sure that the box was not clicked in the menu in msconfig. I tried pressing F8 and using the Startup Repair utility, that is no problem. I can't do a system restore, that there is no restore point. This is very frustrating and I am at my wits end, what should I do?

  In safe mode, click Start, run then type in msconfig and click OK.  On the check in tab boot to see if Safe Mode is enabled under Boot Options.  If so, uncheck it and try to restart.

• Tecra M2 starts only in safe mode

  I recently installed Norton products in my laptop Tecra M2, who met the necessary attention problems.

  However, when a Norton technician has resolved the problem, the laptop freezes and since my laptop was implemented in safe mode.
  Tried several options to return to the normal mode it but fail, every time then restart, it changes again in safe mode and I am not able to access my USB wireless internet and many programs that I use frequently.

  Help please! I don't want to reformat the entire computer unless it's the last resort!

  Hello!

  You can remove the Norton software in safe mode? Try this!
  To be honest I n t have good experience with Norton.

  In the worst case, you must reinstall the operating system as said Garrett. It is the only way to recover a system that works.

  Good bye

• My Vista computer is unable to normally, it starts only in safe mode.

  My computer would not start windows normally, except secure boot Mood.

  Please tell us how to correct the faults.

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  _____________________________________________________________

  If the above isn't the problem;

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• How to disable if Windows starts only in safe mode?

  Unfortunately, my Windows 7 has become unstable again.

  Windows starts in safe mode.

  I would like to reinstall Windows, but... of course, Acrobat will not deactivate this mode.

  So, I would like to know how to disable Acrobat Reader in safe mode.

  Help, please...

  Acrobat allows a few activations due scenarios just like that.  In the case that, after you reinstalled Windows, Acrobat you indicates that you have too many activations, you can contact our support team, and they can work with you to get the matter sorted.

  -David

• My system is continuously restarting and willingness to complete start only in safe mode. System Restore will not work even through DOS command. What to do next?

  Running Vista SP2 64 bit on a Dell Inspiron 530.  System will come up to the login window, if there is no connection - will restart on its own, repeatedly.  It will allow me to log in, but as soon as I get on the desktop, in a short period of time, it will restart.

  I am able to connect through safe mode and safe mode with networking mode.  I tried the system restore by selecting many different restore points using rstrui.exe / offline: C:\windows command safe mode.  The operating system is running on the C drive.  Status on C «Ready to restore» watch

  He always enough immediately cause the error:

  System restore failed... System restore failed due to an unspecified error.  The parameter is incorrect.  (0 x 80070057)

  I did not knowingly install something again before that happens.

  What to do next?

  Hello

  Here's how to use the system without a command restore.

  http://bertk.MVPs.org/html/restoresysv.html

  And information of Dell.

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  Reference Dell troubleshooting with startup problems:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

  Run the built-in diagnostic software:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

  And if this does not resolve your problem, please contact Dell or their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• My Xp does not start, only in safe mode. Normal mode just keeps looping in the loading screen. Safe mode works fine, what to do?

  As the title says. What should do?

  I found out what is wrong. The hard drive could not be "read". Drive C and D was crushed. Had to change the hard drive. Changed, working (y). Thanks anyway :)

• Satellite Pro L300 - commissioned only in safe mode

  Hay, my Satellite Pro L300 computer can be started in SafeMode only because if I start it normally it access to the desktop and then freezers.

  Can someone help with this problem?

  Hey Buddy,

  If the computer starts only in safe mode, this means that something has confused the OS

  Since when have you noticed the problem?
  No doubt it can help you to restore the system to a previous point. If it doesn t help your only option seems to be to reinstall Windows I think. Therefore, you can use the Toshiba Recovery drivers with tools disk :)

• Windows does not start successfully - only in safe mode.

  I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

  Required reading:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284

• Question about upgading Qosmio F20-137 to dual-core

  Hi I want to rank up my Qosmio F20-137 to dual-core. I just need some advice on which one to buy.
  Thank you
  Chris

  Hello

  Needless to say that a CPU upgrade in a laptop is totally sensless because you won´t gain true high performance. On the other side, you have to be a technician who should be familiar with these systems, because a mobile system is NOT THE SAME as a desktop system.

  Regarding your question:
  This system is not able to take a dual-core cpu, because you only have an Intel 910 chipset / 915GM which can only take Intel pentium M.

  If you don t believe me just check out this site:

  http://www.Intel.com/products/chipsets/915GM/index.htm

  Welcome them

• Windows XP worked when to stop, and when turned on overnight, it only shows: safe mode, safe mode with networking etc. This is the result of an update from Microsoft to restart?

  The system does not start normally and brings only to the top of the screen black ad askes to start windows normally, safe mode or network, etc.  What should I do?

  Hello Larry,.

  Once selected, Safe Mode works?

  If so, try boot minimum troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this is not the case, have we not access to a Windows XP CD?

  If so, we can use it to boot into the Recovery Console and to pursue the options from there.

  Let us know.

  Best regards

  Matthew_Ha