Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

Similar Questions

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• EA6300 cannot start the installation

  I tried to use my new EA6300 (AC1200) for the first time yesterday, but I can not start the installation procedure. Today, a new trial, but it no longer works.

  Installation stops directly when I try to connect. What kind of site, I try to reach, which first of all of course www.linksyssmartwifi.com . Then it stops with the message "one moment please...» "Also when you type the ip number 192.168.1.1, what should be the right ip number?

  I restarted the router a couple of times and I tried to reset it for twice, the two don't help/work.

  Someone at - it a solution?
  Thanks in advance!

  What browser do you use? Try using internet explorer but implement the F12 emulation mode. Press F12 and select Explorer 10 User Agent string or try using Chrome or FireFox

• Cannot start the installation of recovery on my Satellite A200 - 28 p

  I'm trying to restore my PC laptop Toshiba Satellite A200 - 28 p (Windows Vista Home Edition) by using the recovery disk of the product supplied with the laptop, no matter what I try to do, I can not run, the only thing that it will allow me to do is to restore the laptop to an earlier date. I have full admin rights on the laptop, there is no virus or other malware on it, all this seems to have happened because he updated with windows vista, about two days ago have uninstalled the updates, but that has no effect.

  I can't find anywhere on the laptop recovery console, but I know it was there before. I tried a lot of solutions available on the web, but none of them work. I used the recovery disc about 2 1/2 years when the laptop crashed and it worked fine then.

  Any help apprecited

  I don't remember how it was with A200.
  You only have a recovery DVD or you could also launch the installation of recovery of HARD drive using F8 at startup (advanced startup options > fix my computer)?

  In any case, the description of your problem confuses me.
  If you are using the recovery as boot drive DVD there is no console repair or some options.
  Installation of recovery on startup, you can only see menu where you have to click on next.
  Please check my lats post on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=61124

  You see the even when the laptop starts to read the recovery disk?

• Cannot start the installation of recovery for Portege M200

  Hello

  I've used the DVD of recovery a long time ago, but now he won early t. Instructions tell you to:
  1 insert the disc
  2nd turn the pc on while keeping the key C pressed
  3. follow the instructions that appear on the screen

  I tried as indicated but nothing happens and windows starts normally. I also tried to open the DVD when the pc is on and I can see the files but can t start the process.

  Can someone help me solve this problem?

  Hello

  have you tried to boot from the DVD? Of course, you can see the files on the DVD, but perhaps you need to change the boot order so it starts on the DVD instead. To do this, restart the computer, and then press F2 when you see the Toshiba logo on the screen during startup (F2 or which key it tells you to press to enter setup).

  Move to the boot order in the BIOS setup and exchange the CD/DVD with the HARD drive so that the CD/DVD is top of the list. Go into the menu of the BIOS Exit Saving Changes and the computer will reboot. I hope that the recovery DVDs should start now, if it works and the completion of all facilities to return to the menu of the BIOS and follow the same instructions to change the CD/DVD in the second and put the HARD drive to the top of the list.

  I hope that answers your question.

• Cannot start the photos on my Surface Pro application

  I can not open the photos on my Surface Pro app.  When I double click on the photo of my office file, it manifests itself is black on the application or the application will load for a minute and then immediately close.

  When I try to open the application from the start screen, it loads for a minute and then stops automatically.

  I rebooted the computer twice.  I have also shut down the computer.  None worked.

  Help please!  Thank you.

  You cannot uninstall photo app in Windows 8 Surface Pro. I suggest you follow the suggestion given by Barb Bowman in the following link.

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-pictures/how-to-fix-photos-app-crashes-and-problems-in/7295b57f-d9f8-4010-8727-3bf6a124f603

  It will be useful.

• Cannot run my installation of Win Xp Pro Cd

  Cannot run Setup from the cd that ORIGINALLY installed win xp pro on my machine because it says that the version on my computer is newer than the Conference on disarmament, well well the only reason I can think of, is that the updates have made the more recent than the original pc version can someone help,

  QUESTION; How to run the Setup program when I get this message please.

  In order to run the Setup program to reinstall windows, put the disc into your computer and start to it, which will give the classical configuration of BACK blue screen and after you format your drive, and windows installs the first part, you will need to return to the mode of windows.

• Cannot start the installation of recovery

  Can hey someone please help me?

  I have a toshiba laptop. The other day I was on it and I went away from the computer and it entered into mode 'sleep'. I came back, the screen was black. I pressed the button for a few seconds and the computer turns off. I then turned the computer back on the screen came the toshiba logo, and then a bar happened to basically say that loading windows which it does not normally. The screen became pale gray, then a box came up saying there was an error at startup and windows was trying to fix it. Then he says: windows cannot fix it and click Finish. I did and then the pc turns off by itself.

  Can someone please help?

  I tried to put a recovery disk in and by pressing F12 and ask him to start from the cd, but the drive just continues to stop and from spinning and nothing appears on the screen.

  Please can someone give me advice. Thank you so much Deb

  Hi debbiem,

  > I have a toshiba laptop
  Which exactly?

  In General if you can boot from the recovery disk Toshiba t you test another drive on startup to check if it s a failure of CD/DVD drive or recovery disk scratched.

• Cannot start the installation for Photosmart 7510

  Try to install the drivers for my 7510. I can't find my CD, so I downloaded the driver. When I try to install the driver for the complete package, the file itself, unpacks the computer thinks on this issue for a second and then more nothing. I also tried automatically detect it and install, and which does the same thing. I got a deskjet, 4100 home before this machine before, but I uninstalled all the software for it. I even ran Ccleaner and deleted a few HP registry entries after the problem started. The old printer has been disconnected from the computer. I checked the Task Manager, and I don't see that anything that looks like it could be installation listed in the listed processes. The printer is already connected to the network, and I've never connected it via USB. Computer is a Windows 7 64 based Q6600 2.4 GHz self-construction

  Thoughts from anyone?

  Hi robcorbin,

  When the download download files extracted, they are placed in a hidden temp folder. The best way to access the files is to type folder in the find programs and files and look for a folder beginning with 7z? In the folder, you will find the setup.exe file to install the printer. If you are still unable to install it in this way, the download file was damaged during download, and you will need to download the file again from the link below. Let me know what you find?

  HP Photosmart full feature software and drivers

• Start the reboot system (Win 7 Pro)

  Hello guys,.

  I have a problem with my windows 7 pro. Every morning I start my laptop starts Windows logo appears and then the screen goes black, it rest for a little whilethat and certain sounds occur as a click or something and feed a compromised system. I again press power button laptop starts this time black screen comes with a message to RUN the STARTUP REPAIR . I press on enter he ask to repair the system and solve the problems. I click ok. and after a while my system reboots normally.

  Even more later in the day I stop / start laptop, it doesn't work perfectly normally No problem to run the Startup Repair tool .

  But the next day in the morning again same problem occurs.

  Query:

  1. what should I do?

  2. What can be done?

  3. how to do?

  4. download and install Windows 10 update will fix this problem permanently?

  Thank you in advance

  ydeepk

  Hello

  Update does not normally solve the problems.

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline crack motherboard, graphics card, connectors, etc., which become obvious once it warms OR cools.

  I wish I had the material under test.

  See you soon.

• Cannot start the Recovery Console Windows from the installation CD

  On my MacBook I ve running in VMware Fusion 3.0.1 a Virtual Machine with Win XP Pro.

  When I reboot Win XP Pro and start again from the Windows XP Pro installation CD, I can see the "Welcome" with the menu screen

  -To install Win XP now, press ENTER

  -To repair an installation of Windows XP using the Recovery Console, press r.

  -To quit Setup without installing Windows XP, press F3.

  When I click ENTER or R, I see the message

  -The installation program did not find any hard drives installed in your computer. Setup cannot continue. To quit Setup, press F3.

  Today the question? In the 40 GB of the virtual machine, I have two free partitions of 10 GB and 20 GB Win XP Pro execution. Why see Setup cannot process this partition?

  I ve also installed a second Virtual Machine, but the installation of VMware Fusion not show the "Welcome" screen, but it installs both Win XP Pro.

  The installation of the recovery in the virtual race Machine Win XP Pro Console is successful, but when I start the recovery in Start Menu Console, just the screen blue 0x7B (inaccessible boot device).

  What must I do, to start the Recovery Console in VMware Fusion? Or another question: when merging does support the Windows Recovery Console?

  Wow, nothing indicates that you use a German version of Fusion that your English is excellent.  Anyway as VMware headquarters is in the United States, like me, I always provide information in English and information-specific guidelines in the VMware Fusion help files come from the English version as well as any Documentation from VMware that I reference.  I say this next part as a general and not directed comment towards you, as you have noted your using the German version... Any person requesting help must always at least include technical information referencing manufacture, make, model, version, and language other then English, material goods and software involved in issues.  We'll find a good reference for the type of information that must always be included in HOWTO: ask (and answer) Questions.

  As a much get into the BIOS if you use the Fusion 3, you don't need to enter the BIOS to change the boot device as this can be done in the settings now however to enter the BIOS for other things that need/want of press you F2 directly after starting the Virtual Machine and after having clicked on the screen but the av VM boot so fast that it's easily missed.  You can add the following settings to the file of configuration .vmx of the Virtual Machine to slow down the startup so that force once in the BIOS.

  bios.bootDelay = "3000"
  bios.forceSetupOnce = "TRUE"
  

  The bios.bootDelay is in milliseconds and the bios.forceSetupOnce Boolean value is then set to FALSE, automatically.  Each of these parameters are independent of each other.

  You can find the following useful notes for this and or other uses...

  ====================

  Notes: keyboard

  Different setting function, you may need to adjust various preferences keyboard to work with the function keys and or use the Fn key.

  OS X > you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

  Merger 1 > VMware Fusion (menu) > Preferences... > keyboard and mouse > activate Mac OS shortcuts keyboard

  Fusion of the 2 and 3 > VMware Fusion (menu) > Preferences... > keyboard & mouse > Mac OS shortcuts > activate Mac OS keyboard shortcuts

  ====================

  Notes: Starting the virtual machine from CD/DVD or ISO Image

  If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

  Engage the Boot Menu and select the CD-ROM drive...

  The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

  "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

  On the status bar, it features...

  'To direct entry to this virtual machine, click inside the window.'

  BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

  OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

  Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

  To give more time to indulge, the Start Menu Add the following...

  bios.bootDelay = "3000".

  For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

  bios.forceSetupOnce = 'TRUE '.

  ====================

  Notes: By modifying the .vmx file

  For Fusion 2.x and 3.x ctrl-click the target entry of Virtual Machine on the windows of the library of the Virtual Machine and choose Show in Finder and then Ctrl-click on the packaging of the Virtual Machine and select to display the contents of the package.

  By default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

  ~ Is your Home Directory.

  The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

  Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

  To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

  To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

  Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

  ====================

  Notes: Creating an ISO Image of the CD/DVD drive

  When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

  To create an ISO Image using disk utility...

  1 insert the CD or DVD disc into the optical drive of your computer.

  2. open disk utility (/ Applications/Utilities/Disk utility).

  3. Select the CD or DVD drive in the list of disks and volumes.

  4. Choose file > new > "Disk Image from (name of the disc)."

  5. type a name for the disk image.

  6. choose "DVD/CD master" from the Image Format pop-up menu.

  7 choose "none" from the encryption pop-up menu.

  8. click on save.

• PROTECTED 2010 cannot start the Slimline Combo drive

  Hello

  I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

  A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

  Both computers are running Windows XP 2nd edition.

  ????

  Thank you

  Best regards
  Anne Mette Voss

  Hello

  Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
  Hmm I think I have an idea.
  I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
  Reboot the laptop.

  After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

  Good luck

• Qosmio G20-141 - cannot install modem drivers and sound card

  Hello

  I have a Qosmio G20 - 141 laptop series. My recovory all CDs have been damaged and some problems for laptop too.
  So I formatted the laptop and I have configured with the new Windows XP sp2.
  After the installation of the operating system, I can not install the sound card and Modem drivers.
  Even if I downloaded these drivers from the Toshiba site and installed, still it does not correctly.

  Please help me and your advice and your suggentions greately appreciated and thanks in advance

  Hi first of all, I recommend an update of Windows XP to the last State.
  All available patches and patches must be installed.

  In addition, the Qosmio G20-141 belongs to the series of PQG21E and you must choose the serial number from the Toshiba driver download form.

  The European driver Toshiba page provides different drivers for XP MCE and many QFE for Win XP Pro.

  In addition, you will find an installation instructions txt file that gives the proper installation order. This command is necessary and you should follow this statement!

  Then, everything should work ok.

• Cannot start the peer name resolution protocol Protocol

  No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»

  I still have unresolved problems with backups, so I don't want a new installation of windows.
  I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?
  Thanks for your help.

  Hello

  Please keep us updated.

  You can read the articles below and see if it helps:

   

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

   

  Share files via public folders

  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  If you need further assistance, please answer and we will be happy to help you.

• Sims3-message-cannot start the game 0x039e8474 service initialization error

  someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

  [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]

  Hello

  Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

  I suggest you follow the steps mentioned in this article about this.

  http://Forum.thesims3.com/JForum/posts/list/561267.page

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the problem persists, you can post the question in the Sims3 community forums.

  http://www.thesims3.com/community
   
   
  Hope this information helps. Response with status so that we can help you.