Qosmio F20 - freezes in games and my work in 3D

I have the drivers from the toshiba site.
The card is Geforce go 6600.

EDIT: Sorry about the site told me that I have swearing etc which I wasn't

When I play games some aspects in the games do not work, and when I do my 3d work it freezes and short slow when I activate the texturing material.

I don't know what to do. It never happened when my recoverydisc worked, but which is now scratched.

> It never happened when my recovery disk worked...
After the installation of the operating system with the recovery disk you absolutely clean OS preinstalled without some updates, additional software or another background application that can use a lot of resources s notebook.

I don't know how long do you use pre-installed OS now and how many things are installed there.
Perhaps, you must clear the OS preinstalled, remove all the unnecessary stuff and disable unnecessary background processes, Disk Defragmenter HARD and so on. Simply, you need to optimize OS preinstalled.

Only driver probably will not help much. There are of course other factors responsible for the freezing of behavior.
By the way: have you ever checked if the laptop is dirty and full of dust?

Tags: Toshiba

Similar Questions

  • Vista on Qosmio F20: SD card reader and Media Player keys do not work

    I recently updated my Qosmio F20 for Vista.
    I got most of the job functions, but my SD card reader and fixed keys for media player still haven't.

    I can't find the drivers for them (I don't think they exist for a F20) so I was wondering if anyone had a solution.

    Thank you

    Hi faarn

    You can't find the Vista drivers as Vista don t drivers is on the page of Toshiba. Some people have posted a link to the official document on the units of Vista support and the Qosmio G and F20 was not on the list.

    But another clue. Check the drivers in another series as F30 or G30. But the chances are small that the pilots will run

  • Qosmio F20: PCMCIA sound card does not work

    Hello world...

    I had a problem with my Qosmio f20. My creative PCMCIA card has been propely work up until a week ago. Now no reason my laptop could not detect it. Even after a format.

    All other works of PCMCIA cards.

    plssssssss help

    The case is clear for me.
    If any other job cards PCMCIA correctly on the F20 and only PCMCIA doesn t creative work then I guess that the card has a malfunction.
    You should test this laptop on another card. If it doesn t work so card is dead.

  • Qosmio F20 - 135 - location 2 does not work

    Hello

    I tried the upgrade memory RAM in Toshiba Qosmio F20-136. There is a 512 MB 2Rx16 PC2-4200 s-444-12-A3 Samsung, and I've found that 1 one slot works properly. I can install 1GBM RAM in slot 1 and that market but when I install the same Kingston 1 GB or same oryginal Samsung 512RAM in slot 2, this does not work, the computer starts.
    BIOS is 1.40 worm.

    What it wrong?

    Is the second slot defective or there is a compatibility issue.
    Is the Kingston RAM of the same type as the original (DDR2 400 / 533 MHz)?

  • Qosmio F20-149: remote control and Win XP pro

    First of all, Hello and sorry for my English.

    My question is if it's possible to get the work of infrared remote control in windows xp professional.

    The only thing I can do is volume up & down, but good... for sure that I have all things... like skip, play, stop and so on.

    I need driver? Or other things? Special settings?

    Thanks for your help!

    Marko Jakobi / Boton
    terrasight.NET

    Hi Marko

    I'm sure that it will be not possible. There is no particular setting that allows this option and also separate driver is not known to me.

    If you want to use skip, play, stop, and another option how you want to configure with which application it must works. Sorry, but I think that there is nothing to do.

  • Qosmio F20 won't start - power light flashes orange

    My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

    I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

    I am really puzzled.

    If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
    In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

    They have manuals containing instructions and the exact description of the code how do I solve this problem.
    Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.

  • Startup fails on Qosmio F20 - alternative to the recovery DVD?

    My Qosmio F20 system restore failed and the OS keeps re-booting and stop alternately. Dare not use the recovery DVDs that I don't have all the files and folders saved yet.
    Don't want to lose them once this system is reformatted. Other options?

    HI Azman,

    First, you will need to identify the cause of the closures (I assume you get a blue screen error followed by a re-boot). You can do this by disabling the automatic restart facility so that the system stops on the blue screen.

    Depending on the error, you may be able to start Notepad in 'safe' mode so that you can back up your data safely.

    Kind regards

  • Qosmio F20 130 - what is FD drive

    Hello

    I have Windows XP.
    Can someone tell me what FD drive please?

    Many thanks in advance,

    Hello!

    Are you sure you mean a drive FD? Do you mean a floppy drive (floppy drive)?

    Sorry, but the Qosmio F20 has no FDD and floppy drives are only in very old books.

    Good bye

  • Decent analog output of my Qosmio F20-154

    I use my Qosmio as a Microsoft Media Center with my TV connected via VGA output. It gives me a pretty good image.

    However, my TV does not support most of the modes of zoom for VGA; or it does for DVI or HDMI.

    So I tried the image output via S-Video - which produces a shitty and unacceptable photo.

    Unfortunately, Qosmio has no TV output, so I can't try it.

    So, does anyone know of a piece of hardware that can be used to make the Qosmio to produce a decent analog output, such as TV-Out (antenna) or Composite?

    Thanks in advance,
    Brian

    As far as I know you have only two options to send the video signal.

    Qosmio F20 supports viga video and s-video ports.
    So either you will use the video VGA (15-pin) port or output video super TV (S-Video) 4pol mini to connect the TV to the laptop...

    I have connected my laptop to the TV also using the s-video port and the photo quality is OK.

    Please check you s-video cable and if possible test another in addition, I would recommend check some settings on the TV and s-video option

  • Qosmio F20-136 - card WLan keeps signal loss

    The connection on my wifi card intel pro/wireless 2200BG for my qosmio F20 - 136 is unstable and keeps the Cup down to 1mbs.
    Can anyone help?

    I read a lot of suggestions concerning the question of WLan Intel 2200BG and to be honest, for the most part a WLan driver update should help to address these issues.

    I recommend to visit the Intel driver page and to download the Intel WLan driver for wireless Intel 2200BG card!

    Then, remove the old WLan driver and install the most recent!

  • No matter what internet browser very slow/no work, but other applications such as online games online, torrent works fine.

    Hello world

    I have a weird problem, my internet browser is very slow/unresponsive, but associated other online apps work perfectly. I tried chrome and internet explore. It is not the problem with the internet, I passage of Time warner to Comcast cable and both times the problem persists.

    I play several games online, such as starcraft and steam games, and it works normally.

    I'm running a windows vista 64-bit home premium with service pack 2.

    running an i5 processor

    GForce 460GTX

    and 2 Sata hard drives.


    Hello shinji_45,

    The performance of Internet Explorer problems are usually caused by defective modules. I suggest that you run Internet Explorer in Mode Add on No and check if you have the same problem.

    To do this,

    a. Click Start, point to programs, point to Accessories, point to system tools.

    b. click Internet Explorer (No Add-ons).

    c. If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

    a. click Tools and then click Internet Options.

    b. click on the tab programs, then click on Manage Add-ons.

    c. click an add-on in the name list and then click on disable.

    d. Repeat step c until you identify the add-on that is causing the problem.

    If this solves the problem, this could be caused by an adware installed as add-on.

    If this still does not address the problem, reset the Internet Explorer settings. Reset the Internet Explorer settings.

    To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

    a. Quit all programs, including Internet Explorer (if it is running).

    b. Click Start, type the following command in the start search box and press ENTER:

    Inetcpl.cpl

    The Internet Options dialog box appears.

    c. click on the Advanced tab.

    d. Under Reset Internet Explorer settings, click Reset. Then click again on reset.

    e. when Internet Explorer finishes reset settings, click close in the reset Internet Explorer settings dialog.

    f. restart Internet Explorer.

    You can check the links for more information below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-browser-add-ons-affect-my-computer

    http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Don't know what could really be the cause Chrome is slow. However, since browsers are slow, you should start solving this problem in the browser.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Turn Windows features on or off - games and IE are mutually exclusive?

    When I activate the games help to turn Windows features on or off, IE11 is deleted from my computer and is no longer visible as an option to activate Windows features On or Off.  It is a 2 - day old HP Probook running Windows 7 Professional.

    I need to restore to recover IE11 on my machine.  I did this four times now.  100% reproducible.

    Any ideas?

    Okay, I think that all is well now.

    I turned on the game, uninstalled IE11 from Windows Update and reinstalled IE11 using offline Installer.

    The games and IE11 work.  IE11 appears even to turn features Windows turn on or off.

    Thanks for the help and suggestions!

  • I can't connect to xbox live on windows8 and updates until get game and then nada nothing. I know it's not my connection because I use the connection for this post (I'm in oz)

    I tried like 10 times to get the collection of solitaire to update, I tried to upgrade the application games and nothing works. I checked my firewall settings still nothing.

    I can't connect to xbox live via the above. I know that's not me, i'm at my wits end

    Help!

    Hi André,.

    This seems to be a problem with your Xbox Live account. So, I suggest you to post this query on the Xbox Live Forums since this link:

    http://www.Xbox.com/en-us/forums

    Hope this information helps you.

  • Qosmio F20 - 111et Windows Vista - cannot get sound and driver to the display work

    Dears

    I just installed windows vista Home premium 32-bit, but I faced with 2 main problems, which are:

    1 - sound:
    2 - GO 6600 128 MB graphics card

    I found the driver for them, but it did not work so I need help you please.

    Respect of

    Hello

    Unfortunately, I have not Qosmio G20 but if you use option search on this forum, you can find interesting topics on Vista on Qosmio F20.

    For the test of its http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24004

    Display, maybe this will help you http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21823&messageID=80423

    Make sure that the BIOS is updated to the latest version.

    Bye and good luck!

  • After installing new FN and multimedia keys do not work on Qosmio F20

    Hello, my friend buy Qosmio F20 of the Germany, but it comes with Windows Xp with the German language on this subject. I format the hard drive and install Windows Xp Professional SP2. I download all of the drivers who was very available and most of the functions work (like display, sound, touchpad and others), but the multimedia keys and the FN keys do not work (remote work). The other problem is that I can't install the TV tuner.

    With German Windows XP, I try TV tuner but have no SOUND what is the problem? When I try to install the utility software under display appear message that says "Unable to get the information from the BIOS" or something comparable. I have install all the drivers that I found in the Qosmio F20 support page but I have video control with exclamation mark in Device Manager.

    Can you help me?

    Where am I wrong? What should I do?

    First of all he must know that if you are going to install together the Toshiba drivers after installing the OS to do in the right order!
    On the Toshiba driver page, you will find the Installation Instructions. You will need to follow the guide line! It is important to properly work all the functions!

    In addition, you will need to select the right OS. There are two: XP and XP MCE.

    To control buttons Toshiba works correctly, you will need to install the controls.
    But as I said above: follow the instructions in the insulation.

    A few words on the TV tuner:
    As far as I know, you can only use the TV tuner in the country where the laptop was purchased because different PAN and NTSC settings.
    In addition, the TV tuner driver offers TV tuning and recording capabilities using Media Center on your computer. If you have any MCE so I put t know how you want to watch TV.

Maybe you are looking for

  • confirmation letter you sent back twice and it does not appear on my yahoo account

    I created a Thunderbird e-mail account just to use only once for a project. He took everything on my yahoo Inbox, as well as a lot of junk and put it in the Inbox of Thunderbird. Then I closed the window and now do not know how to get to my Thunderbi

  • Browser launch a call with the active cache

    We did a simple Web site, with a simple link to site.com/logout url. When I turn off the cache of the browser the request starts and ends without any problem. When I activate the browser cache demand begins to site.com/logout page is updated with a 3

  • The Toshiba A60 USB 2.0 controller host, can anyone help?

    Hello world I have recentry purchased a new Toshiba Satellite A60 notebook. Of course, instantly I formatted and installed XP Pro, because I didn't need half of the programs that the laptop is installed with. Problem is now that everything what they

  • Reset the computer laptop "VPCEB32FM" back to factory settings

    Sony technician Hi I wanted to know how to reset my "VPCEB32FM' back of laptop for making adjustment. When I bought the laptop it came with burnt copy of recovery disc and no manual on how to get it back. also sometimes when I watch a clip on the int

  • Add tags when creating a constant

    Hello. I have created many custom datastructure (data packets). When I right click and say "create Constant' constant I create shows the cluster with the data inside, but without and the help of labels. How can I change this so I can see the labels (