Qosmio F30-127 is unable to read the Vista upgrade disc

Similar Questions

• I have to restart Qosmio F30-127 in order to recognize the inserted disks

  I have the Qosmio F30 127, which has the CARPET * A DVD RW. Very often, however, it does not recognize the fact that there is a disc in the drive. I have to restart for the DVD to recognize the inserted disc.

  If a disc is placed in the slot, shortly after starting it is correct until an attempt to use a different disk.
  This is a common problem or any other agency knows this and if so what is the fix?

  I put t think that it s a common problem.
  Always it is that readers do not each CD/DVD support and sometimes such disorders.
  Try to remove the drive from Device Manager and restart the laptop. After the reboot, the drive should be recognized again. Check if there is no change.
  Check that you have installed the firmware. Maybe a new available on the Toshiba page.

• Try using the Vista upgrade disc supplied with the system displays error Windows version is not authentic

  original title: with Acer Aspire Vista Help
  Well, here's the story, I bought an Acer aspire T180 a few years back from Best Buy with Windows Vista installed. The only drive I received was a Vista Upgrade disc. Fast forward a few months computer slows down, etc so I thought I'd see any control and maybe cleaning the system some. Put my disk to upgrade looking for the way to do it. Make the mistake of installing the upgrade. now I have the upgrade on my computer and it always tells me that I have a version of windows that is not authentic. I tried to use my COA on upgrade drive, does not recognize and COST on the case of my Aspire, once again with the same result. I have my old version under windows.old, but can't seem to install it. I would just go back to my Vista OEM install. I have access to another computer, but it is an Apple and prefer if I didn't use this option unless it makes it easier. I guess what I'm asking, it's just to get back to my legal version on this computer, would like to keep files, but if can't, I would like to do a clean reinstall. Mine is out of warranty, so no help from Best Buy or Acer without paying their

  You are welcome.

  But try first to borrow a Microsoft Vista DVD of an acquantance of work for this restoration instead of a full recovery.

  See you soon.

• Qosmio G30-201 is unable to read the hd discs

  I cleaned the lens of the hd player and the discs are all clean and withought scratches. The reader will read audio CDs and regular CDs, he also wrote for the dvd and cd discs.

  When I insert a HD disc in the drive it just continues to produce a whiring sound strang and will not play.

  I played the hd movies on the laptop when I got it first, but he is unable to read it now.
  Help, please.

  Steve

  Hello

  so, if the player has played before that should always work, or? :)
  Installed a few programs that could possibly affect the playback of HD discs? It might be a good idea to recover your system, perhaps to issue it s just a software.
  Otherwise, if I were you, I´ll sent my machine to a service partner chartered for a material balance of health. (You still warranty?)

  Welcome them

• I have the vista upgrade disc, but it will not validate

  OK, I got a laptop that I installed windows vista on and I no lnger this laptop say just her destroyed. so now im trying to use this same disc on my computer at home, but it will not validate.

  How to uninstall from my laptop which is now pretty well into pieces

• Qosmio F30-127 abandoned but still on sale in stores, but not by Toshiba?

  Hi, does anyone know why the Qosmio F30-127 is deleted in the site Web of Toshiba but its still for sale at other retailers?

  I found for £679 pds but just wondering why?

  Rgds

  Why abandoned model?

  I found this device here on the Toshiba site and most online dealers offer this laptop for sale:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?PRODUCT_ID=119392&service=UK&tab=3& toshibaShop = false

  As far as I know that the Qosmio F30 - 127 (PQF30E) was delivered to the United Kingdom.

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• After you download CyberLink PowerDVD 12, am unable to read the comics

  Since the download, CyberlinkPower DVD 12, am unable to read the comics if it starts with a trailer or advertising.  When it comes to the "Play" button, nothing happens.  Someone, please help that Cyberlink will not say as to what is happening.  Thank you.

  Hello

  As much as we want to help you with this, I fear that this issue is not part of our scope of support. I recommend you contact CyberLink support, as they are one who takes over this issue properly and in the best position to address this problem.

  Thank you for your understanding in this matter.

  Thank you!

• Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.

  my kids are always downloading music and other things on the internet and some without reason, I lost my sound that I get an error that there is no audio device found... or being used?  This was the last message according to test of microspft race driver and then tried to play something of my documents... Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.  Can you help?  Bill

  (1) try reinstalling the audio drivers from the drivers disk that should
  came with your PC.
  (2) try to do a restore to the point where the problem wasn't there:
  Start > programs > Accessories > system tools > system restore
  (3) download and install the latest driver from the manufacturer's website.
   

  Best regards
  Singapore Web hosting

• Unable to read the security descriptors data stream

  Whenever I start my computer runs CHKDSK - it says checking file system on E: and then he said that it should be checked for consistency. It works until stage 3 when he says 'impossible to read the security descriptors data stream' how to fix this?

  I tried chkdsk e:/r and it runs before step 3 when I get the "unable to read the security descriptors data stream" and it goes no further.

  I also tried fsutil dirty query e:- but it says something about a parameter incorrect and not if the volume is dirty or clean.

  Then I tried chkdsk e:/f/x - that always gives me the same mistake about it being an incorrect setting.

  As far as I know there is absolutely nothing on E:, I didn't even know that there was an additional drive. Right now I have it turned off so that I can use my computer. It seems to work fine without it. I read an article that said that if I can't fix e: with chkdsk which I have to do a low-level format of the reader? What's my next step? And I can do without the XP disc?

  The syntax

  fsutil dirty query e:

  is correct (except, of course, you try to use from the Recovery Console, where the fsutil command is not available).  Are you logged on as a user with administrative rights when you use fsutil?

  Similarly, the switches /f and/x are not available for chkdsk in the Recovery Console.

  See Recovery Console controls.

  Click on desktop then right-click on E: drive icon and select Properties.  What is indicated for:

  • File system
  • Space used
  • Free space
  • Capacity

  Now double click the icon for E: are shown files?  If not, click Tools > Folder Options > view and select the radio button "Show hidden files and folders" and uncheck "Hide protected files (recommended) operating system.  Now that you see all the files?

  Everything you read 'low level of shaped' is nonsense.  Any modern PC drive cannot be low level formatted by end users.  You can read this, but there is really no necessary even to "zero fill" your drive E: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=203931 (I have not checked to see if the WD tools rescuer has similar characteristics to SeaTools for DOS).

  If you are convinced that there is nothing of value on E (for example, installation of backup or restore), you can either format by right-clicking on the drive icon in my computer and selecting "format" or you can start disk management as described previously and use either in electronic format or delete the partition completely.  If you delete the partition, space becomes "unallocated".

  Because I guess C is your system drive (where Windows is), you may be able to use the diskpart tool to extend the partition F to use the unallocated space left if you decide to remove E well it's much easier (and safer) to do with disk management third-party tools such as Easeus Partition Manager free : http://www.partition-tool.com/personal.htm

• The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?

  The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?  Slow performance are now a big problem.  Natural remedies do not work

  Hello

  I suggest you perform a clean boot in order to check whether a third-party program is causing the problem.

  See this article for more information on the clean boot:

  
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353  

• Unable to read the work recorded, timeline is black and shortcuts

  Unable to read the work recorded.

  I started doing a few words with a song. It was not full yet so I recorded it. After a while, I returned to continue, but the timeline would not play. The video section containing the words of the timeline was black and shortened. I waited until the next day and it still the same. I tried to re-do and its not black or shortened, but the timeline would not play with or without music. Please I need help with this!

  Hello

  1. what application you're using to play the video?

  2. you receive an error message when you try to play the video?

  You can try to recreate and save the film.

  Reference:

  Demo: Create a slide show with music in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

  Create movie customized for Windows Movie Maker settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

  To save a movie in Windows Movie Maker, click the link below.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

• Unable to read the blue-ray

  I am unable to read the blue ray on my laptop, it says that I need a program to play, where can I find a software to be able to play blue-ray?

  You need a blu ray disk drive and the program to play with. Google for something, or go to your favorite computer store.

• Lightroom is unable to read the files of my DSLR Nikon d5500 has been added

  Lightroom is unable to read the files my DSLR Nikon d5500 has been added, but no difficulty to read of my Nikon 3100 DSLR that I do?

  Thanks for the info Jim. I found that I could use a DNG Converter and have now managed to access my files so I'm sorting. Thank you

• installation: my version of elements adobe 12 is unable to read the raw files from my canon 70 d SLR.

  my version of elements adobe 12 is unable to read the raw files from my canon 70 d SLR.

  You need Camera Raw 8.2 or higher.

  12 items delivered with 8.1.

  Click Help > updates to update Camera Raw