Qosmio F30-141 - how to change the RAID to IDA in the BIOS?

Hello world! I own computer laptop Qosmio F30-141. The problem is that I don't like vassive RAID. Please, could you tell me step by step how to change the RAID to IDA in the BIOS. Thank you in advance.

Why do you think that this can be changed?
Maybe you can disable the RAID and be happy without him.

Have you checked s manuals? It is described how RAID works on Qosmio F30.

Tags: Toshiba

Similar Questions

  • Qosmio F30-112 - how to reset the BIOS password

    Hello

    Broke laptop Qosmio F30 - 112 with broken lcd screen.
    Now, I get new lcd monitor and fix it but I can't access the password of the bios.

    I discovered how to recover passwords of other boards in computers laptop toshiba, but I can't find this.
    I'm looking for is the name of "rider" that resets my bios password.
    I carried a laptop in a local service, but they did not eliminate the problem.

    Help, please!

    Best regards

    Antonio

    Hello

    As far as I know the unknown BIOS password can be removed only by technicians of Toshiba ASP maybe you will have to pay a small fee but should not be too
    Another method is not known to me ;(

  • Qosmio G30-126 - how to access the bios!

    I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?

    Hello

    Try pressing the F2 key by turning on the device.
    The Toshiba notebooks supported the ESC and then F1 button
    If these two options are possible

  • How to change the bios password remotely

    We're a lenovo shop all. (m58 and more). I'm looking for a way to change the bios supervisor password remoetly. I found the WMI and the PDF orders to go with them but when I run SetSupervisorPasswordRemote.vbs I get "Microsoft VBScript compilation error: due to end of the statement"I am not very versed in VB so im not sure how to solve this problem. "

    If not is it possible to take this back to powershell and use it to change the bios password?

    Hello aford89,

    Although the follwing linked to the thread is on T450 ThinkPads the answer is the same across the range of product; You can only do this if you have already set a password manually.

    https://forums.Lenovo.com/T5/enterprise-client-management/setting-BIOS-password-in-SCCM-task-Sequenc...

  • How to change the BIOS settings to read the Norton CD?

    In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

    In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

    You may or may not need to change the BIOS settings.  Assuming that you have a bootable CD with this tool, put it in your CD drive and restart the computer.  One of the 3 things will happen:

    1. the computer starts from the CD and you can follow all instructions you have Symantec.

    2 watching very carefully that the computer starts.  You may see a message that says something like "press any key to boot from the CD-ROM.  If you see this message, press a key (for example, the space bar) and the computer boots from the CD.

    3. watch very carefully that the computer starts.  You will see a message that says something like, "to change settings, press F1."  The key that you press on will be different depending on your particular computer.  It might be F1 or F10 or del key.  Whatever it is, press this button and you will enter the BIOS configuration utility.  From there, you can change the boot order to CD first.  Directions to navigate the BIOS Setup will be displayed on the screen, but they will involve using the button tab, enter, and arrow keys, because your mouse does not work in this utility.

    You can also take a look here: http://www.bleepingcomputer.com/forums/topic228631.html

  • Qosmio G30-137: how to change the English language OS?

    Hello!
    I just bought Qosmio G30-137 of the Germany and he has Windows Xp MCE in German language.
    The recovery disk is also in German also. I would like to know if someone can provide me with the recovery in the English language disc or can someone tell me step by step what I need to do to make a format for install Windows Xp MCE version in English and what programms I probably need because I'm a newbie...

    The laptop has also two HARD drives with RAID technology.
    I can't wait to hear promptly.

    Hello

    Windows was delivered in German language, because you bought in Germany. You cannot change the language to English without the recovery or the original version of the Windows operating system English English CD.

    You can install the original Windows operating system but before you install the new OS you need to install the RAID driver.
    Check out this FAQ from Toshiba document:
    http://support.toshiba-tro.de/KB0/TSB56012H0001R01.htm

    See also the similar topics:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8076&MessageID=30452#30452
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4603&MessageID=15170#15170

  • Qosmio F30-140 - how to use the USB Flash boot option?

    Dear,

    After I updated my BIOS of the laptop, when I start my laptop I find new start method, it is from USB Flash?  :| How I can use it and what type of file should be in it? I mean .iso or what?

    Thank you

    Hello

    I n t have Qosmio F30 so that I can t test it for you, but I think it means options that you can boot from a USB stick for example. Did you check that?

    You can boot from an iso file t because you have to create a bootable media. For example a Windows Start disc or a version of Linux that you can boot from a USB key.

  • Qosmio F30-125 - how to upgrade the RAM?

    Hello

    I have a model PQF30E Qosmio and who seek to increase the RAM.

    I read that this model can take 2 GB max as opposed to the PQF32E which can take 4 GB.

    I have the standard 512 MB installed at the moment and when I open the back I have only a slot for expansion. Should I put a 2 GB upgrade in this slot I can not find a 1.5 GB upgrade or is it possible to delete the original 512 and replace with2 x 1 or 1 x 2 GB.

    Thank you
    Ben

    Hi mate

    What boarder said is right.
    The user manual provides information on the possible RAM upgrade and there is also an instruction how to put the RAM in the slots.
    Usually it s not difficult and can be done very quickly.

    View just the words to the subject of the upgrade of RAM max;
    It's material and limited to Intel chipset limitation.
    If you want to know how much RAM is possible then check your type of chipset and visit Intel for chipset details.
    In the datasheet, you can find the specifications of the chipset.

  • HP Probook 440 2 How to change the BIOS to work around the memory not supported the start-up message

    Hi everyone, first I would like to say that I find the list of operating system for the less "interesting".

    Now, I bought a G2 to replace my 4441S.

    The problem is that the momory I had gave me a message as "memory not supported."

    very well, I bought new memory, same problem with 2 brands, so I it's maybe because I bought 'normal' memory and not DDR3l?

    The thing is that I need this memory quickly and I can't find DDR3L, now I use corsair Vengeance and I need more on the lan function but this message that allow me to use the computer if I press on enter, have no countdown with option by default and no BIOS settings so I want to change that and either add a timeout that starts the laptop or just disable this message , because it works, I use it now.

    I need that until I can find the DDR3L.

    Thank you.

    You don't seem to understand how it works with primary and secondary memory voltage settings schedule and bus. the laptop BIOS ROM file includes settings in its encoding of the memory modules that meet the compatibility requirements. If you install memory that has not been tested for compatibility, so it will not work or even it seems to work, it will be unstable.

    A BIOS of the laptop is quite unlike a BIOS that is present in a motherboard level amateur games. There are no timings adjustable and tensions to the timings of the memory or bus in a laptop BIOS BIOS standard voltages. It actually is to protect the owners from themselves.  You "do not 1.5 and 1.35. You can't change the setting of the voltage on the bus to do anything other than what is defined in the BIOS. If you install the module memory does not accept the voltage set by the BIOS code, then you are simply out of luck.

    Check out the BIOS Modding forums if you want to see what options may be made available.

  • How to change the BIOS battery inspiron one 2320

    Please how do I change the battery of the BIOS on my Dell inspiron one 2320.

    I'm looking for a model, because I already opened the hood, but I have not found the battery.

    Thank you

    Schpountz

    Please how do I change the battery of the BIOS on my Dell inspiron one 2320.

    I'm looking for a model, because I already opened the hood, but I have not found the battery.

    Thank you

    Schpountz

    How to replace the battery on page 56 here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-one-2320_owner%27s%20manual_en-us.PDF

    Bev.

  • Qosmio F30-117: how to calculate the Win Vista experience Index Graphics score?

    My F30-117 has a NVIDIA GeForce Go 7600 of type graphics card. WIE gives a score of graphics of * 4.9 based on the following information:

    399 MB total available graphics memory
    128 MB dedicated graphics memory
    0 MB dedicated system memory
    271 MB shared system memory

    However my G40-108 has a NVIDIA GeForce 8600 M GT type graphics card. WIE only gives a score of graphics of * 4.4 based on the following information:

    1791 MB total available graphics memory
    512 MB dedicated graphics memory
    0 MB dedicated system memory
    1279 MB shared system memory

    Someone knows why? The two PCs have the latest drivers and all the Windows updates available. Both are running Vista Ultimate. If something I expect the scores to be the other way around!

    Hello

    The functionality of Windows Vista experience Index that is designed to help better understand
    How Windows Vista and other software will perform on your computer.
    As I know the Windows experience index scale varies from 1.0 to 5.9.
    A higher base score means that your computer run better as a computer with a lower score.

    I don t want to explain the characteristics of everything because there are a lot of pages useful Microsoft that already provides this information:

    Check this box:
    [Windows Experience Index: year in-depth Look | http://windowsvistablog.com/blogs/windowsvista/pages/458117.aspx]

    or this MS site:
    [Windows Experience Index | http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/experienceindex.mspx]

    Good bye

  • Qosmio F30-127: how to use the SD - no SD card reader icon

    Could someone how to use SD F30-127.
    I tried to get the image from my SD card.
    I inserted in the slot, but no drive ICON displayed

    Hmmm. Please check if the SD card has been recognized in the Device Manager.
    There should be no yellow exclamation!

    Another allusion;
    -Remove the SD card in the slot
    -Go to Device Manager and remove the SD card controller
    -Now reboot the laptop
    -After restarting again windows should recognize and install new hardware. It is a SD card controller.
    -Now, try to reinsert the SD card!

    By the way; have you used the format SD card?

  • Qosmio G30-163: how to change the settings for the keyboard in the UK

    Hi, I bought a Toshiba UK G30-162 and it does not have a Uk keyboard (directed by Vista), main caps do not correspond to the key. That is to say an umlaut = ', + =-.

    It took me a long time after that.

    Hello

    What type of keyboard you have now? And how to think that Don t you have a UK keyboard?

    Is a sign of (euro) on your "E"? If so then you probably have a German or a keyboard of france. If this isn't the case, then you have an American or a UK keyboard.

    Just look at your settings in your systemproperties.

    Welcome them

  • How to change the bios of my computer?

    I want to change my computer's bios so that it does not seek to boot from an external drive.  How do I do that?

    1. read the manual of your computer.

    OR

    2 turn off your computer.  Turn on your computer and monitor very closely the screen.  You should see a message go quickly indicating something like "Press F1 to enter Setup".  Turn your computer off again.  Turn it back on and immediately start typing the key that you have identified.

    OR

    3. provide the brand and model of your computer, and a person may have information for you.

  • Portege S100: How to change the RAID in the BIOS

    Change the BIOS setting for Portege S100 of JBOD to RAID0, I hit space on Exectute creation and enter the key of type string in the manual, and press "enter".
    Settings and then return to existing arrangements and not the new RAID0 configuration setting that I selected.

    I stayed in this part of the day / night looking at different positions, but I don't see anything wrong with the data entered.

    This is the same as that recorded in this link: -.
    [How to change the RAID configuration | http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]

    I'm now at the end of my home, I just wanted to install new HDD WD and new installation of XP Pro, is - it too much to ask?

    Maybe it s a silly question but; have you installed the second HDD to the Ultra Slim Bay?
    The RAID did feature is available when a second HDDD is installed in Ultra Slim Bay.

    If the second HDD was inserted and then change the RAID in the Windows operating system.
    There should be a Toshiba RAID Console.
    You can use this console to create or manage a RAID array.

    To start the utility, click Start, point to all programs, point to Toshiba, RIAD-tap and click RAID console.
    It of possible to change the RAID1 (mirroring) of a configuration non-RAID (default).

    But note; When RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.

Maybe you are looking for

  • Maps app shows wrong time, how do I get this changed for my business?

    My customers using cards iphone App get bad times for my business. Cards apps is from 18:00, we close at 5:30 and the Apple. My website, facebook, yelp, google maps and all the ads say 05:30. How do I get this changed on Maps Apple application?

  • Trace the name Update Causes flickers

    Hello I found this method in another thread, and it's quite ingenious; but I have a slight problem with it.  My application has three cards data collection tracing for six graphics of different waveforms, and each chart has several locations showing

  • e280v2 8 GB micro SD card

    I have installed 8 GB micro SD card.  I noticed that there is a record created MSC.  Can I move my mp3 in this folder, or simply for the external SD card? Thanks a bunch! Tim

  • BlackBerry Blackberry Storm Smartphones

    Greetings all a 'newbie '... Just saved etc: I have on order of the "STORM" of Voda and pending the delivery of launch date (11th I am told) but notice here somewhere that's a 9500 series, since it is the first time I saw the reference to the storm,

  • How do reset you the statistics for a game in Windows 8?

    Game original title statistics How do reset you the statistics for Windows8 game?