Qosmio F30-147 - no sound after update driver

Hello

you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

hosts of the Germany, sry for my English untrained! Help, please!

Hey,.

This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

Check this box!

Tags: Toshiba

Similar Questions

  • Qosmio F30-147 - no sound after Vista upgrade

    I recently upgraded my Qosmio F30-147 of Windows XP MCE to Vista Business. I downloaded and installed almost all drivers available on the download page of Toshiba (including the update of the BIOS). Everything works fine but the sound. The SigmaTel High Definition Audio CODEC is the only "peripheral" listed in Device Manager. I have installed and uninstalled the SigmaTel driver available (version: 6.10.5462.0) several times without success. You have any ideas?

    Very strange! You have installed all the stuff with command described in the document instructions facilities facilities?

  • Qosmio F30-111: no sound after the update of the 3.40 BIOS & Vista installation

    Hello!

    I have a Qosmio F30-111, originally with Windows MCE and all devices works fine, but I made an update of firmware BIOS to 3.40 (before was a version 1.x).

    Later, I installed Windows Vista Ultimate and all devices has been recognized very well (with Toshiba Vista drivers), but the sound was not working!
    The situation was:
    -The sound device has been recognized;
    -The MIC works (but I can't hear it);
    -The speakers do not work!<- the="" real="">

    Now I installed the recovery CD and I'm new to Windows MCE, but noise have the same problem... is recognized, but the speakers do not work.
    I have no idea what to do... I don't know if it is possible to restore the firmware (I think that was the problem).

    Don't forget: the audio device works, the works of Media Player, but I can't hear the sound (Yes, the volume is high and is not dumb)

    Sorry for my bad English,
    Thank you very much!

    Murilo

    Hello Md2

    You can hear the noise if you plug headphones into the audio?

    If there is his helmet and then the audio device works well.

    If not, then disconnect all devices external usb and start a clean installation of vista (not upgrade, but booting from the vista cd)

    don't forget to put the RAID driver on cd or diskette or usb flash key before doing the clean install of vista.

  • Qosmio F30-147 broken due to overheating

    * Qosmio F30-147 *.

    Hello dear toshiba users!

    My laptop seems to be broken because of overheating.
    When I noticed that the fan was running at high speed and the chassis was untouchable hot.

    Also, the system has been frozen and the display shows vertical stripes of color.
    After an hour or two, I tried to start it again and it could not start. I got was a screen with two-colored vertical stripes ([see photo | http://img134.imageshack.us/img134/1040/img0472c.jpg])

    Because my system does not appear at startup, I guess that's more than a failure of the graphics card.

    Any suggestions?

    Much appreciated!
    I am lost without my qosmio!

    Hello

    It s a shame to hear this companion
    According to your screenshot the GPU or the display may be affected.
    But the laptop would still be bootable so only display would, so in my opinion, there is something wrong with the graphics chip.

    I think that in this case that the whole motherboard must be replaced.
    There's not a lot of proposals for solutions. You need help from the ASP in your country.

    Here you will find the database with all the FSA world wide:
    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

    Good luck & cheers

  • 30 - Qosmio F-113: no sound after installing WinXP Pro

    I installed Windows XP Professional on my Qosmio F30-113 (preinstalled system is WinXP MCE).
    All devices work properly except for the audio card.
    It not there no sound anywhere, but in Device Manager, it seems, there is no problem with any device.

    I tried to install the audio driver (sound-qf30-xpmce - 51049460.zip) TOSHIBA-Center download - but after restarting Windows install tells me, that the current system doesn't support driver, which I am trying to install.

    What should I do? Which driver to use?

    Hello

    It's very strange. As far as I know that the driver can also be used with WXP Home and Pro. There is no difference. You are right on the sound card. Your laptop has an its SigmaTel STAC9200D card and the driver is SigmaTel HD Audio driver V5.10.4946.0.

    I don't know how did you install all the drivers, but I hope that you did this in the order of good facilities. The order of good facilities, you can find after downloading the install Instructions document.

  • WhatsApp sound after update ios10

    Hello, after updating to ios10 my sound of whatsapp is identical to my e-mail (threetone). In whatsapp, I chose a different tone but no matter what I do, its always the threetone. Can someone help me with this? Best regards, Gerard

    Have you updated the Whatsapp application lately?   A couple of days, they have released an update for iOS 10.

  • Qosmio F30 and Vista - mode ATK100 ACPI Driver need

    Hi people!

    I hope you can help me solve my problem. I ve installed Vista Home Premium on Qosmio F30 my friend (don t know for sure, but it's the model F30-100) and everything works great found nvidia drivers BT etc... but an error message keeps coming up when my screen shows: mode ACPI ATK100 driver...
    I tried to find a solution, but nothing seems to work...

    Help!

    I'm not quite sure what is the mode of ACPI ATK100 driver, need for, but I guess you can disable loading this driver in the msconfig or it could remove from the registry RUN m.
    EntVersion entVersion\Run

    This would prevent the driver from loading and the message would not jump upward.

    See you soon

  • Satellite T100-107 - after update driver, I can't use Bluetooth

    Satellite T100-107/getting updated driver killing Bluetooth windows 7 64 bit running.

    Started toward the top of my new laptop, did all the microsoft and Toshiba updates and bluetooth does not work.
    So I did a reinstall of the hard drive to the top, did all the updates and got the same result... bluetooth sees devices, but does not connect.
    I have read all the threads here, no solutions. I messed with the settings, tried 4 different devices (mouse, telephone, headset another laptop); no difference. More rolled back a lot of pilots.

    Then I reinstalled from the hard drive again once does no update at all and all devices are now connected
    BUT, of course, I need to make updates.
    If anyone has any advice on which you could give me this question?
    If this isn't the case, I'll have to do each update singularly and check that I can always connect via bluetooth.

    + Thanks for reading XX +.

    Hello

    Have you tried to reinstall the new BT stack, after doing the update in Win 7?

    The new BT stack can be found here:
    http://APS2.toshiba-tro.de/Bluetooth/

    Welcome them

  • Laptop HP 15-af122no: crash at startup after update driver AMD

    I bought my computer on February 2016, so it is quite new. There are 10 Windows ready and recently it has been upgraded. My internet connection LAN, no problems with that.

    Yesterday an automatic detection of AMD system informed me that my drivers need to be modernised and I gave her permission to upgrade, maybe that has been my biggest fault... After that I needed to restart the system, and I did. The computer started showing strange texts on the screen, I remember that one word from him, it was at the end of the first line: "watchdog". After that the text of HP showed and freezes on the screen. I tried to start the second time, the result was the same. Third time the texts initially showed no more, but the start crashed on HP display.

    I am now on a computer it's not me and I tried to get help for this problem to the Support HP Finland, since I can't use HP Support Assistant on my HP. I found a few tips I've tried:

    -J' removed the battery and the power cord, but it did not help

    -After starting the computer, I pressed ESC several times to get in safe mode. Finally I got to a mode where I could enter a few commands (unfortunately I do not remember more..), but it does not give me the result I was expecting (and said what page of support must be the result). The computer said that it does not find these batch files requested.

    I'm really sad that I have had no money to buy a proper memory stick or cd to make the stick recovery or discs... NOW, they may be needed.

    I've been thinking about resetting the computer, but there could be some risk, too... Please, please, help me, I don't know what to do anymore. I hope you find a solution to solve this problem, thank you already!

    Hi there @Troublefinder,

    Thank you for joining the Forums HP's Support and welcome! You have just a great place to ask questions, find solutions and get help from others in the community. I understand that once you had done a update driver and recently upgraded to level to Windows 10, now your HP for laptop - 15-af122no (ENERGY STAR) is not allowing you to start correctly.

    Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    Are you blocking upward at the HP Logo?

    Have you tried a hard reset?

    Have you tried to Test for hardware failures?

    Are - that you receive error messages or error codes?

    You happen to see a blue screen to choose an Option at all?

    If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

    Follow these steps to remove and reinsert the memory modules for troubleshooting:

  • I had to reformat after an attack from windows xp repair. No sound after updates

    I had to reformat after an attack from windows xp repair.  After the installation of Windows and all of the things drivers worked very well.  After updates, no noise.  So I reformatted again, installed Windows and all the drivers except the sound.  Done all updates, and then made the hardware update for my sound card in Microsoft.  Its worked. Tested with the music of the sample, had all of the clicks et al.  Then I restarted the cpu.  Turn off its worked, the turn is heard started and stoped the half way through.  No more sounds.  I tried all the round he took back on things.  Can someone help me.  My cpu is a Dell XPS 400 Dem, card his Creative SB Audigy 2 ZS (WDM)

    I think I'll try another sound card.  You pc is quite old and components go wrong.

  • Videos playing only with the sound after update 49.0.2

    After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/

    It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.

    (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false

    This may not take effect until the next time that you exit Firefox and start it again.

    One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

    • button '3-bar' menu > '? ' button > Troubleshooting Information
    • (menu bar) Help > troubleshooting information
    • type or paste Subject: support in the address bar and press enter

    In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

    If you use e10s:

    To determine if this feature is causing this problem, you can turn off as follows:

    (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

    (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

    (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

    Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

    On your next startup of Firefox, it must be run in the traditional way. Any difference?

  • Inspiron E1505 Vista no sound after update

    There was a Microsoft Update on 16/10/08 and now my sound on desktop icon has a red X.  I checked the site updated driver and driver is correct.  All speakers are supposed to function properly.  Can someone advise me?


  • HP Color Laser Jet Pro M452dw: no automatic duplexing after update driver

    Installed the updated driver and software M452dw.  I can't print any documents usng the automatic duplex function.  I changed the printer properties from one side of 2 sides, but the feature screen always manual duplex printing.  I have been using automatic duplex printing since I bought the printer in November 2015.  Something must have gone wrong with the update or it does not update correctly.  Suggestions are welcome and/or corrective action to fix the configuration.

    You will need to go to devices and printers and right click on the printer icon and scroll first and left click Properties. Now at the top of the page click on device settings and then scroll down to the duplex of change not installed and installable options at installed and apply and save the settings and it should now work as you wish.

  • Flashcards fail after updating driver VAP on the Qosmio F30 Vista

    Given that I have updated to the latest drivers for the PPV the flash memory card fails at first upward. Does anyone have the old driver or a solution. I lost all support button etc.

    See you soon.

    Steve.

    Sorry, but what is driverupdate VAP? Can you please explain?

    Regarding your problem: have you ever tried to download the site flashcard software Toshiba driver and reinstall it on your machine? Maybe it works after a reinstall?

    Would appreciate some feedback from you :)

    Greetings

  • No sound after audio driver update

    sounds on my pc

    Hello, after installing a driver realtek hd audio (new)

    I couldn't hear anything on my pc, I used wht I have seen that a windows audio driver need help thank you

    Try to roll back the driver to the one who used to work as follows: http://www.howtogeek.com/howto/windows-vista/roll-back-troublesome-device-drivers-in-windows-vista/.

    Then go to the manufactuerer of computer or the manufacturer of your audio device (if it came with the computer) ane search for updated drivers and be ABSOLUTELY sure that they are those of your audio device, AND they are compatible with your verision of Vista.  Then you can try to install these updates to see if they work.  If the same problem occur, then for some reason, these drivers do not work with your system and rollback again the one who worked and that you shouldn't use them.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • MSN now social api link does not work

    Https://support.mozilla.org/en-US/kb/add-social-features-your-browser MSNnow link does not work for me. Is this a problem by msn or make a mistake here?

  • How can I configure only the Favorites icons in the sidebar in Fx 10?

    Hi all I am new to Fx extensions, so please provide the solution to the following problem, I have: I want to have my bookmarks on the left tab, which will broadcast only the icons of my fav pages. Is it possible to do it with Fx 10 extensions? Thanks

  • return to 3.6.5?

    Firefox 5 sucks big time! I want to go back to 3.6 where all my Add ons worked. Why do they decide to make a new version to give up all the things that have worked in the previous version? It is a sloppy all design simply. I want that my return as we

  • HP50g - assign the submenu of debugging to a key in user mode

    How to assign the submenu of debugging (in Lshift/PRG/RUN) to a key? Thank you

  • External monitor is empty

    The backlight is out on my Toshiba laptop, so I hooked to a monitor recent flat screen to it. Gets the windows start Windows XP _begins_ but never _to_ my office. Start Windows XP runs for about 20 seconds, and then the monitor reads "no signal". I j