Qosmio F30 keyboard does not work properly

Similar Questions

• Keyboard does not work properly

  Hello

  I had trouble getting my laptop satellite to initialize. Recovery disks & pressing F keys weren't working so I decided to open the laptop to see if there are any loose connections. To my surprise, the laptop seems to work again once I had the USB keys and put back them in! Unfortunately, before that I did, I opened the keyboard and peeked inside.

  When I booted up and tried to use the keyboard keys half of their work and the other half seem to think that they represent two other keys for example if I type the letter 'E' I get '3' and '-' as a whole. After 5-10 minutes the entire keyboard will become totally unresponsive until I restart again. Of course, I think I've done something here because this problem since I opened the bottom of the keyboard. This could be a hardware failure I have caused or is anyway that this issue can be resolved without replacing anything?

  Thank you very much

  Tom

  Hi Tom

  Theoretically, it might be just a connection lost between the keyboard and the motherboard, but I'm afraid, it can be a serious problem of m.
  Maybe you have damaged the connector of the keyboard cable or something similar, and not the keyboard does not work properly.

  I think the keyboard needs to be replaced to check if only this part is affected

• My laptop HP keyboard does not work properly.

  My laptop HP keyboard does not work properly. First of all, it makes a clicking dull when I type, second if I type (anywhere) it wont let me repeat a letter or any key back to back with waiting 2 + seconds. It comes with the connected keyboard or a usb keyboard. How can I stop this?

  In the Panel-> Accessibility-> make your computer easier to use-> make the keyboard easier to use, check your filter keys, if it is on, turn it off.

• Equium M40X keyboard does not work properly

  I Equium M40X, but the keyboard does not work.
  I can not type anything with the keyboard. I reinstalled windows using the recovery CD but stil doesn't work.
  Please help me solve this problem.

  Sorry, but I think that the keyboard is dead and must be replaced. If you can get a new one let us know. Maybe someone can help you and explain how to share one keyboard.

  Good bye

• R500 + Dock + fingerprint USB keyboard does NOT work properly

  USB keyboard does NOT work before Windows logon. (Start-password to type with the laptop keyboard) Also the external keyboard fingerprint reader does never work in this configuration.

  (With my old Z60m, same keyboard and docking station even works well, except the startup password must be entered with the keyboard, the keyboard USB fingerprint reader does NOT work at this point.)

  R500 2732-6AG Vista Business

  Battery ThinkPad Advanced Mini Dock

  External USB keyboard with fingerprint 41A 5262

  Jochen

  New software of fingerprint for ThinkPad R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301 does not support the external fingerprint reader

  Click here to view the details of downloading new software.

  Click here to view the details of download for older software.

  On the software page oldest, you will notice that the keyboard agroenvironnemenaux USB and USB fingerprint reader.

• Qosmio X 70-A - keyboard does not work properly

  I have a Qosmio X 70-A-12N, newly purchased last September, 8.1 Windows 64-bit.

  After working properly (and lots!) for half a year, the keyboard started to stutter.

  If you type a paragraph or two, with say 250 words, each time and now, to say that every 10th or 20th Word (undpredictable), a key shot does not work. I tried another keyboard via USB: no problems, so it has to do with the built-in keyboard of Qosmio.

  It is not specific keys, and it is not the pressure with which you press the key.
  Any key can be be ignored from time to time.

  All drivers have been updated to the latest questions, the BIOS is 1.50.

  It seems that the problem is more important when working on the battery (not sure).

  Is it a software or a hardware problem? Should the keyboard be exchanged?

  My first thought was last updated from the BIOS, but according to the Toshiba download page you have latest version of the BIOS.
  You know that's not easy to say what the problem is here. I can't say with certainty if there is a problem with the keyboard, but maybe you should contact the nearest Toshiba service provider, explain the situation and ask for help.

  They know what needs to be done. at least, they have very good diagnostic tools and it is possible to detect the problem.

• Qosmio G30-163 mouse and keyboard does not work properly

  Hi all

  I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

  "Start the Registry Editor (start, run and type regedit and click on).

  Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Exit the registry editor.

  Reset. »

  Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

  I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

  John

  S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

  This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

  Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

  First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
  This would allow you to save the data to another HARD disk.

  Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
  I hope that this will be possible because I don't see another way to get the operating system again.

  Good luck by a friend

• Keyboard does not work properly on the Satellite P100-465

  Hello
  Toshiba P100-465, I bought last month and discovered that if you press any key sound (especially the SPACEBAR or enter) between the upper right, it does not work.
  I never saw such a problem anywhere in any laptop. Please confirm if this is the case with all or should I get my keyboard replaced.

  I read this forum for a long time and I have strength to find a lot of comments about it. Because of that I think he cannot be serious and I recommend you contact the partner of service authorized in your country.

  By the way if you press the keys correctly (around using the button) I see no problem there but service can check properly and if problem described is a problem with the hardware keyboard will be replaced free of charge.

  Bye and good luck!

• Tecra 540 CDT: keyboard does not work properly

  Hi people

  Just bought a 540cdt Tecra second hand and the keyboard is a bit strange - A key does not work and some of the keys seem to make things weird-UPDATE prints an exclamation mark and key END operates caps lock etc. I don't know if it's a keyboard of knakckered or whether the same strange keyboard configuration has been made. If it's a flat keyboard will install a replacement to solve the problem?

  Also, is it possible to replace the CD drive with a DVD - ROM drive. From the looks of it all DVD players I have met seem to be model specific.

  See you soon

  Peter

  Hello

  Maybe your operating system has keyboard settings wrong country.
  Check in the control panel settings. But for me, it looks more like a keyboard or a keyboard controller failure.
  Perhaps also loses the keyboard cable.
  I don't know if only a new keyboard will solve the problem. I think the detailed diagnostic test is necessary.
  If you want to upgrade your laptop with DVD drive, please check first if it is taken in charge and compatible. If you install the disc is not compatible, then you will get an IDE error and the BIOS does not recognize the drive.

• Satellite C855 - 1 GR - keyboard does not work properly

  Hello
  Yesterday I turned my laptop on to find I couldn't hit my password as some of the keys on the keyboard are not working. It's only a few keys, I noticed at the moment F L O R V, NumLock, enter, delete, and the arrow keys do not work either. When I press some keys turns num lock.

  Also when I open upward keys to self-retaining now is turned on, so I can't type anything, he used to come just I had turned off the laptop, but now it turns on if I just too closed.

  Any ideas? Ill use the keyboard of the screen now!

  Sounds like a malfunction of the keyboard.
  Try to connect an external USB keyboard and check if it will work properly.
  In case the USB keyboard would work properly, the internal keyboard needs to be replaced for sure.

• Satellite Pro 6100 keyboard does not work properly after repairs

  Hello

  My 6100 Pro Sam just being away from usual mother board and power Board replacement with Toshiba, but now I have a strange keyboard problem.

  When I turn it on, all the keys are working. After a few minutes, '3' is not working, then 'r' fails, then '5', ' 7 ', ' 8',' 9 ', ' 0' to stop working. At this point, I can feel something very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with the internal keyboard and an external keyboard to the PS2 is still defective (some keys work, others do not), but the outer one works properly.

  Now, if the pc has not obtained if hot as the middle of the internal keyboard, then, I would conclude that the keyboard was defective, but for his failure, slowly and sequentially like this and it fails at the same way every day (since Toshiba rebuild it!).

  Perhaps, internal keyboard controller overheating?
  Anyone know what this could be? :-(

  See you soon,.
  Homer

  Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs on the same map). It is normal that this part become hot during use.

  It is strange that your problem appears after a while and not immediately.

  It could be just a bad relocation of the keyboard cable (it's a thin layer as a movie negative photo) which easily appears there, but... it may be something more serious, too. (Especially since you had done upgrade where the material had to be changed)

  I consult the service centre once more and ask for instructions how to deal with this. Do not ignore it (using an external keyboard instead of internal dysfunction) because he could end up in something more serious soon...

  Concerning

  chain

  P.S. Please keep us updated on your efforts

• A key on the keyboard does not work properly

  Hello

  I have a problem with my keyboard:
  One button of the keyboard doesnâ? t working properly: I want to write a vowel with an accent (as in French and Spanisha? ¦), but if I press the button obtained, then the vowel, the vowel, and TWO dashes (a´a´) appear: a´a´i. normally, it should automatically be a focus on the top of the.

  I tried another keyboard, but Ca? s the same problem when I connect it to my laptop. I also tried to choose another language as the French and Spanish, where they have accents, but it still doesnâ? t work.

  It would be great if someone could help me.

  Thank you very much
  Hanna

  I agree with Weezle. In any case, I have no much experience with it, but I think that some symbols do not appear automatically if you close button only once. There must be something.

  Try to find some information on the pages of Microsoft. This question is not associated with Toshiba.

• Satellite Pro C850 keyboard does not work properly and opens several programs

  My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing

  is there a permanent solution to this problem?

  This is not something to do with installed programs is not something to do with the browser settings.
  restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!

  > is there a permanent solution to this problem?

  The question is what causes this problem? Is it related hardware or software related issue?

  Why n t connect a USB keyboard just to check if the same would happen?

  In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.

• Qosmio G10: OS does not work properly (very slow)

  I have the same problem with the CPU. Pc slows down extremely, sometimes it's back to normal, but after a few seconds, it's like hell once again. I tried various OS (Win xp Home, Xp Pro and XP MCE) so far, but none of them does not solve the prob. I tried then to see if I can slow down the CPU manually, but that did not work, either. Kinda funny, because I had no probs virus, nothing.

  Actually I don't really know what I should do now.
  If there is anyone out there with the same problem, let me know, if all is well there is someone who has solved.
  Otherwise, I'll go with linux, maybe that's going to work.

  Anyway, please if anyone has good suggestions...

  Thanks in advance

  CU

  pistolpete

  Hello

  In my opinion, you should install OS using recovery media. The image content designed Toshiba all drivers necessary, and it should works well. It has been tested and there should not be any problem. If the antivirus application is installed it can slow down the BONE quickly (as in my case).

  Like I said, the recovery DVDs to use for the installation of the OS and enjoy life.

  Good bye

• Qosmio F30 - remote does not work after recovery

  I replaced the HARD drive in my qosmio F30 and restore windows XP MCE from the DVD of restoration, but the remote doesn't work anymore under windows. However, it always works for the qosmio player. Help, please?

  Hey Kevin,

  You can download all drivers here if you have a European model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Your model is a bit more if you need to find in * Archives *:
  * Archive * > Qosmio > Qosmio F Series > Qosmio F30

  Check this box!