Qosmio F30 - no sound while watching TV

Similar Questions

• Qosmio F30 - no sound on Windows XP Pro

  Hello
  first I install Windows XP MCE, but a few days ago, I have install Windows XP Professional Edition and lost sound in my laptop.
  What was happen?
  How can I fix it?
  Someone say that's because Qosmio F30 can support Profesional edition. Truth?

  Hello

  Support for computer laptop Win XP MCE and XP Pro!
  XP MCE supports some additional features but it of the same OS!

  I think that you should first check if the audio driver is installed properly (check the Device Manager). Check the setting of the volume and the sound settings in the control panel!
  Do it!

• No sound while watching TV or playing a video in Windows Media Center.

  Original title: MEDIA CENTER NO SOUND

  NO SOUND WHEN PLAYBACK VIDEO OR TV USING MEDIS CENTER. MUSIC READING OK

  Hi JASPER235,
   
  a. when the issue occurred?
   
  b. don't you make changes to your computer before the show or never worked at all?
   
  c. what operating system is installed on your machine?
   
  d. When you say TV, are you referring to live TV?
   
  In the meantime, you can follow the steps below.
   
  Step 1:
   
  Try to configure your speakers in Media Center:
   
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click general, click Windows Media Center Setup and then click Set Up your speakers.
   
  b. follow the instructions to configure and test your speakers in Media Center.
  
  Step 2:
   
  If the problem persists, you can try the following steps:
   
  Configure the sound card
  =======================
  a. click the Start button, type "MMSYS. CPL"(without the quotes) in the search box and press ENTER.
   
  b. on the Read tab, click on the speaker is currently being used and click the properties button.
   
  c. move to the Advanced Options tab, uncheck 'allow applications to take exclusive control of this device.
   
  d. If the enhancements tab is available, click it. Check "disable all sound effects".
   
  e. by setting section, select None.
   
  f. click on apply, and then click OK.
   
  Note: If a single Live TV has no audio, can be the TV Tuner driver problem, make sure that the most recent driver is installed for the TV Tuner card and sound.
   
  See also:
   
  When you use Media Center to watch live TV on a Windows Vista-based computer, you can't always hear the sound
  http://support.Microsoft.com/kb/929515
   
  Audio problems in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center
   
  Similar issues were discussed here:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/4e38c325-b5b0-4253-a6c3-8d0fa07b11d8
  
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/2a32abf7-464c-4A65-9d97-76e1720cc490
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• No sound while watching the video from the portable computer

  Hello guys,.

  I have HP pavilion laptop computer with Windows 8 is installed.

  Since a few days, when I watched ALL the videos on the laptop, I have no sound at all.

  Video works fine, everything else seems to work very well.

  Thank you

  Arif

  Modern user interface or desktop Internet Explorer?

  Have you tried a simple system restore to a date when everything was working for you?

  If you did (or just don't want that easy way back or can not because your restore points aren't that far behind, or whatever...), you can try:

  Uninstall all Plugins Internet (RealPlayer, QuickTime, Adobe Flash Player, Adobe Shockwave Player, Adobe Air, Adobe Reader, Microsoft Silverlight, pack K-lite codec, Java Runtime Environment (JRE), etc.) to your computer.
    
  Turn it back on.

  • Reset Internet Explorer default.
  • If used, reset the default values for Firefox.
  • If used, reset Google Chrome to the default values.
  • If used, reset Opera at the default values.

  [Note: If you don't have any other browsers installed at that time, taste: Mozilla Firefox, Google Chrome and Opera are decent.]
    
  Restart the computer.
    
  Install the following plugins:

  • Adobe Reader
  • Adobe Flash Player
  • Apple QuickTime
  • Microsoft Silverlight
  • Java Runtime Environment
  • K-Lite Codec Pack BASIC

  Be careful when installing each of them to NOT install anything other than the application.  No additional software such as bars of tools or scanners virus or other - uncheck options you install (go through the steps of each and READ/UNDERSTAND what you click on!)
    
  Restart the computer.
    
  Come back and let everyone know how things work.

• Qosmio F30-147 - no sound after update driver

  Hello

  you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

  Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

  hosts of the Germany, sry for my English untrained! Help, please!

  Hey,.

  This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

  Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

  Check this box!

• Qosmio F30: installed new drivers now no sound.

  I have a Qosmio F30 (PQF32), have just started to use Driver Detective to update the drivers, problem is now I have no sound.
  Control Panel says no. Audio Device, and more when I boot it says new hardware found PCI but can not find the driver.
  Would appreciate any help to restore the sound on my PC... "Not impressed with Driver Detective".

  Hello

  Why you n t back to the first version of driver sound?

  You could do this driver download sound manually from the European pilot of Toshiba page.

  Then delete the old driver from the Device Manager (uninstall) and after rebooting again install the new downloaded driver.

  Usually, it should work!

• Qosmio F30-111: no sound after the update of the 3.40 BIOS & Vista installation

  Hello!

  I have a Qosmio F30-111, originally with Windows MCE and all devices works fine, but I made an update of firmware BIOS to 3.40 (before was a version 1.x).

  Later, I installed Windows Vista Ultimate and all devices has been recognized very well (with Toshiba Vista drivers), but the sound was not working!
  The situation was:
  -The sound device has been recognized;
  -The MIC works (but I can't hear it);
  -The speakers do not work!<- the="" real="">

  Now I installed the recovery CD and I'm new to Windows MCE, but noise have the same problem... is recognized, but the speakers do not work.
  I have no idea what to do... I don't know if it is possible to restore the firmware (I think that was the problem).

  Don't forget: the audio device works, the works of Media Player, but I can't hear the sound (Yes, the volume is high and is not dumb)

  Sorry for my bad English,
  Thank you very much!

  Murilo

  Hello Md2

  You can hear the noise if you plug headphones into the audio?

  If there is his helmet and then the audio device works well.

  If not, then disconnect all devices external usb and start a clean installation of vista (not upgrade, but booting from the vista cd)

  don't forget to put the RAID driver on cd or diskette or usb flash key before doing the clean install of vista.

• Qosmio F30-147 - no sound after Vista upgrade

  I recently upgraded my Qosmio F30-147 of Windows XP MCE to Vista Business. I downloaded and installed almost all drivers available on the download page of Toshiba (including the update of the BIOS). Everything works fine but the sound. The SigmaTel High Definition Audio CODEC is the only "peripheral" listed in Device Manager. I have installed and uninstalled the SigmaTel driver available (version: 6.10.5462.0) several times without success. You have any ideas?

  Very strange! You have installed all the stuff with command described in the document instructions facilities facilities?

• Unable to save since the sound card of Qosmio F30

  Hello - I have a Qosmio F30 standard with integrated sound card but can't direct recording of the map (use of Audacity).

  I have Vista Home premium, but try when it recording using the microphone and picks it up plenty of background noise.
  Have sorted the line in option to record from a tape, but recording music online streaming is beyond me.

  Can anyone help?

  Hello

  to record online music streaming, you must use a special program ripper that rip´s the part of the flow of output and written on the disk, because it s not possible to record sounds that are IN the system.

  I Don t know if this could help you-> http://all-streaming-media.com/record-audio-stream/

  But check and maybe you can find a solution for you. ;)

  Welcome them

• Qosmio F30-117: after upgarde to Vista - no sound

  I have improved my Qosmio F30-117 to Windows Vista with a clean install.

  I downloaded all the drivers from Toshiba for Vista website, including audio drivers.

  But I have no sound, everything else works fine. I verify that it is not cut.

  Sound driver details are: Sigma Tel High Definition Audio CODEC - version date 040407: 6.10.5462.0

  Its worked before upgrade.

  What did I miss?

  This is very interesting case?  :|

  I have read about similar issues and I have read about possible solutions.

  I could be possible that this may happen because the sound has cut out Windows XP before Windows Vista was installed.

  I studied a bit and found this useful and interesting paper Toshiba which describes the problem and provides and solution:

  [Audio cut off (no sound) after the installation of Windows Vista: http://209.167.114.38/support/techsupport/tsbs/all/-TSB001438.htm]

  Maybe you should check this!

  I would be grateful feedback from your part

  Greetings and good luck

• My iPad is dying? It keeps sending me back to the homepage while watching what either.

  My iPad IS dying? Continues to send me back to the home screen while watching what it's online.

  Hi Umeggie,

  Thanks for checking out the Apple Support communities! I understand that you are having problems with your iPad closing Safari and you return to the home screen. I use my iPad all the time for browsing with Safari, so I can understand how this can be a problem for you and am happy to provide suggestions.

  The first thing that I recommend you do is try to reboot your iPad.

  How do I restart

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  The next step you can take is to try closing the Safari app and try he raises. You will find the steps below. You can also test this on another Wi - Fi network (if you have one available) to make sure that there is not a problem with the Wi - Fi network to which you are connected.

  Force a nearby application on your iPhone, iPad or iPod touch

  The next step that I recommend is to reset your settings. This does not erase any of your data, but I recommend you save it just to be sure. You can find the steps for the backup of the below. To reset your settings, you will need to go to settings > general > reset > reset all settings. This will not erase any personal data of contacts, applications or pictures, but it will do the following: reset the restrictions de-register you FaceTime and iMessage, delete contact ID & password, remove Pay Apple cards, reset the wallpaper, brightness, sound, date & time. It deletes also all Wi - Fi network connections, so you'll need your Wi - Fi password to restore the link.

  The backup of your iPhone, iPad and iPod touch

  Take care!

• Toshiba 32AV615DB reduce while watching her without touching the controller

  Hello.

  My TV acts as if there is a sign to extra distance.
  While watching, the sound will reduce without touching the controller.

  It is not possible to market. It will scroll together various displays.
  Buttons on the side of the TV do not work.

  You can activate the TV market, sometimes who will work for a while!
  Another day, it will work perfectly.

  Any suggestion is welcome.
  Thank you

  I found a thread that describes a very similar TV acoustic behavior:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70847

  It seems that the Dynamic Volume is enabled in the settings of your TV.

  + Audyssey Dynamic volume® control volume levels in order to eliminate the strong points and lift the soft dialogue for film and television more enjoyable viewing. +
  + In the sound menu, press up or down to select Dynamic Volume. +
  + Press left or right to select On or off.

  Check it out. Maybe it helps.

• Qosmio G50 not sound on HDMI

  * Qosmio G50 not sound on HDMI *.

  Hi all

  I hope everyone recognizes the following and would be kind enough to help me. I searched the forum and tried several of the solutions proposed mainly apply to Vista, but still.

  I hooked up my Qosmio G50 to my Philips LCD HDMI cable. Picture is ok, but there is no sound. I tested the cable with a Toshiba Satellite Pro L550 and it works allright. Image and sound work. But this laptop has Intel HDMI audio.

  I am Windows 7 Home Premium 64 bit slot. I improved by upgrading Toshiba DVD of Vista 64-bit. Unfortunately I do not know with certainty if the HDMI audio worked before that. I think so because I used the laptop to watch a movie on a Panasonic plasma. But I don't remember if it was before or after the upgrade.

  Realtek HD Audio device is installed driver version 6.0.1.5923
  Realtek HDMI Output is selected as default playback device.
  Test gives me graphic response (flashing) but no sound from my TV.
  Choose the other audio device Realtek Digital output doesn't change anything and I do not think it would work anyway.
  I tried to remove the device and then reinstalling the original drivers. I tried the REaltek drivers on their site.
  I tried to change the HDMI view only but what does nog change anything either.

  One thing that worries me is that, under his / Realtek HDMI Output / Properties / he supported Formats are no current format. The satellite gives me audio DTS and others. So I wonder if there should be present formats and if so, how can I change that / add a few.

  Please forgive me if there are mistakes in the text. I translate this to a Dutch version of Windows 7.

  Please help me. All suggestions are welcome!

  I found an article of * Support technique Toshiba * but for Qosmio G30. You must set a default to playback HDMI device

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Perhaps, it allows you to...

• Qosmio F30 - problems of its Vista/7 x 64

  Hi all.

  I installed Windows 7 (RC version) on my laptop. Installation was successful. After this OS has found and installed all the necessary drivers (audio driver is installed too, I checked it). Now I have such driver: SigmaTel High Definition Audio CODEC v.6.10.5866.0. But I can't hear any sound! I tried to launch music on my laptop, all the levels in the Control Panel window "Sound Devices" are activated, and indicates the maximum volume level. But, again, I cannot hear any sound. I don't understand what is the reason for this.
  OS shows me that everything is OK, but I can't agree with it. Can you help me? Work on PC without sound is not beautiful.

  It seems that the speakers are turned off... As if they have disabled by Fn + Esc key combination... How I check it? And how do I solve my problem?

  I noticed the same thing on my Satellite Pro P300. After installing Win7, everything was OK.
  I found the sound driver as advised by Win7 update, but after install driver sound was gone.
  So I think that Win7 works much better as bare BONES. :)

  In any case, for now Win7 is not supported and are all you can find some BETA drivers listed on the page of Toshiba U.S. support but not for all and not for the old as your Qosmio F30 laptop models. FN functions work only with utilities and tools specific to Toshiba. For Win7, such tools and utilities, do not exist and cannot be downloaded.

• Need driver for tuner Tv on a Qosmio F30

  I have problems with the signal fall when you watch digital tv on my qosmio f30 and after that you are looking for on the site of toshiba found an article stating that there is an updated driver for the tuner which should fix this problem, but after following the link to the driver download section he returns only with driver version that I already have.

  Has anyone found the updated driver? the older version of the driver is 1.0.2.1930. the updated driver is Version 1.0.5.1340 the doc id where I found the info is TSB6801J30001R01.

  Hello

  I had the same problem find the updated driver, because he cannot be found under download section, to find the updated driver check updated driver under section of the knowledge base on the toshiba site. located on this page.
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=UK&ID=Support_Homepage lancement_remarques

  Once you are on the page of the knowledge base, select box in the qosmio categories. then you should see a link for qosmio f30 (problems reception Tuner DVB - T TV signals Via the integrated analog-to-digital). Click on this link and you should find the driver update.

  Resolved updated driver problem on my qosmio, hope, she does the same for you.

  Ali