Qosmio F45-AV425 - can I use 800 Mhz memory modules

I intend to remove the standard 2 GB came with my laptop.
My question is since the fsb running at can 800 mhz I buy 4 GB 800 MHz? (I don't know if the motherboard can be considered).

If I can't do this sick then just buy at 667 mhz sodimm.
Any help would be appreciated.

Thank you.

Depends on the FSB (front side bus)
If the FSB supports 800 Mhz then you can take 800 Mhz modules and modules will take place also at that speed.

But if the FSB doesn't supports this speed so your modules will run more slowly.

Install equipment such as diagnostic tool * Everest Home Edition * and check that your laptop support ;) FSB

See you soon

Tags: Toshiba

Similar Questions

  • Re: Satellite X 200-can I use the 800 mhz memory modules?

    Hello.

    I have a X 200 with 2024 MB of ram.
    I want to spend to 4048 MB ram.

    Is it possible to buy memory ddr2 667 or 800 mhz can I use?
    I think that my motherboard is as follows:
    Intel PM965 Express chipset.

    If its so I can only use ddr2 667 mhz, can I then use any mark at all, or is it special that toshiba recommends?

    You should be able to use the 800 Mhz modules, because the FSB supports 800 Mhz also.

    Greetings

  • Satellite M100-221: can I use 2 GB memory module in a slot?

    My Satellite M100-221 currently has 512 MB of memory and I want to bring to 2 GB. Is it possible to expand the memory by adding just a 1 x 2 GB memory in the expansion slot available? Or I have to put a matched module (2 X 1 GB)?

    Hello

    As far as I know it of possible to upgrade the memory to 4 GB max.
    That's why one a bank should be able to handle the module memory of 2GB.

    So it of your choice if you want to use a module of 2 GB or 2 x 1 GB modules.

    Greetings

  • My Qosmio F45-AV425 does not illuminate

    Hi friends

    I have a Toshiba Qosmio F45-AV425. When I press the power button, the laptop starts, the LEDs work properly, but noting appears on the screen. I hear two beeps and immediately cooling fan stops but LEDs continue, then I have to turn off the computer. I changed the memory cards for a good, but nothing.

    What does two beeps? It has the warranty has expired. What can I do?

    Luís De Sousa

    Have you tried to install memory in another location? Some laptops will not start if there is RAM only Slot b

    Also try an external monitor, you see an image?

  • Qosmio F45-AV425 - buggy video playback and HD audio

    I have a Qosmio F45-AV425 and recently bought a title of HD-DVD (planet Earth). I tried to play it drive Toshiba HD of Pentecost, but video and sound playback where buggy (video and his sometimes gel, 100% CPU usage). If I update the player to version v4.32.00, but nothing has changed.

    My computer has the TS-L802A HD player - DVD with the version 6.0.6000.16386 firmware (21/06/2006). I not found any update for this drive.

    Can someone help me?

    Hello

    Have you tested with different HD-DVD movies? Is equivalent to reading?

  • Upgrading the RAM. Can I use the old memory of the computer for the newly purchased computer.

    My old computer which does not has RAM 1.00 GB Dual-Channel DDR @ 106 MHz (2, 5-3-3-7), while the anther computer, I bought recently has RAM DDR 400/128 bits. Can I use the old memory of the computer for the newly purchased computer. Are they compatible? Thank you

    Hello nonmae,.

    You must use DDR 400/128 bit RAM in your system. @ 106 Mhz DDR is quite old. It's also much slower than the DDR 400. RAM is not particularly expensive today and it is always best to stick to that suggests your PC user manual.

    You must use the same speed too, if you use a lower speed, the memory of your PC by default at the lowest speed, thus slowing the PC

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • is DDR2 - 667 mhz or DDR2 - 800 mhz memory on the s10-2

    Hello, I want to just make sure that this model (s10-2) can support DDR2 - 667 mhz or DDR2 - 800 mhz memory

    and what is memory maximum ram can be updated... ?? 2 GB or 4 GB...

    also, can I find ram gaming/high-performance notebook on the market...? like office

    What ram to games / high performance type can support this model...

    Hello... Quote "backward compatible with 533 MHz and 667 MHz speeds - does that mean..?
    System itself works in 667 MHz... even when you buy and install a 800 MHz Memory Stick... it works with 667 MHz... machine will become not faster, but won't work that means backward compatible...

    800 = 6400 see table...

    Can.   Transfer transfer ModuleName MemClock i/o clock rate
    100 MHz PC2-3200 DDR2-400 MHz 200 400 MHz 3.2 Gbps
    DDR2-533 PC2-4200 133 MHz, 266 MHz 533 MHz 4.2 GB/s
    DDR2-667 PC2-5300 166 MHz 333 MHz 667 MHz 5.3 GB/s
    DDR2-800 PC2-6400 200 MHz to 400 MHz to 800 MHz 6.4 Gbps

    cordially KalvinKlein

  • Can we use Office default memory offline if the customer does not have enough free memory?

    Can we use Office default memory offline if the customer does not have enough free memory?

    Yes. We can use the parameter offlineDesktopDefaultMemoryScaleupValue jointly with the offlineDesktopReportedHostMemoryValue parameter in the registry.

    For example, if your client system has 2 GB of memory and the desktop view is configured to require 2 GB of memory, you won't be able to check the desktop view because low memory is also necessary for visualization of hosted customer.

    Use the parameter DesktopReportedHostMemoryValue = 2048 registry offline, so that you can go to the desktop and use the registry parameter offlineDesktopDefaultMemoryScaleupValue = 1024.

    so that the desktop view uses only 1 GB of memory when run locally.

    Reg patch: HKCU\Software\VMware, Inc. \VMware VDM\Client\disableOfflineDesktopMemoryScaleup

    Note: If it's a small environment you can do manual. Or we can simplify this activity by creating a group policy.

  • Question about the use of the memory modules

    I have a dilemma between the use of a new 1 GB memory (what I intend to buy) with more speed
    and by using the 1 GB + my old 256 with less speed
    which option will contribute more?

    Hello

    The fact is that if you use 2 different memory modules with different properties (of lower performance) so the laptop can run with lower performance. This means that the 256 memory module slows down you memory. The best way is to use the same modules having the same properties.

  • Can I use 800 x 600 for the tablet on a Portege M400-146 mode?

    I would prefer not to have to change resolution whenever I go to Tablet mode.
    Is there a work around to use 800 x 600, a screen resolution I find it more comfortable for my eyes, please?

    John

    Hello

    If the resolution of 800 x 600 is not available in tablet mode, then I guess that it s not possible to choose this one.
    Have you checked the properties of the graphics card?

  • Satellite 1800-100 Celeron 800 Mhz memory wich?

    As the subject says, I have a Toshiba Satellite 1800-100 laptop Celeron 800 Mhz with 128 MB of Ram and I need extra memory for it.
    I want 256 MB additional but which must be of type number in my laptop? Unfortunately, I couldn't find a good job site to find the answer by myself.

    Hello

    Check the following URL. I used ORCA RAM modules myself successfully.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6988&ft=M&St=1

    HTH

  • Qosmio G30-161: can I use the Docking Station?

    Is there a docking station that I can use with my G30? I'm looking for something that will have USB, network and monitor connection to perform docking the G30 on my desk a faster and easier connection (more connection a load of cables each time)?

    Thank you

    Phil

    Hello

    No, it is certainly not possible to use a docking station or APR on the Qosmio unit.
    The unit should have a docking in slot at the bottom but the Qosmio hasn t he.

  • Qosmio F-20: Can I use a DVD + R DL

    Anyone know if I can use a DVD + R DL in Qosmio F-20? Page 4-9 (top) of the user guide, it seems that Yes ('double layer burner only'), but then in the next page (4-10) it is said that 'the DVD + R DL media is not available.

    Thank you.

    Hello

    Many portable Toshiba come with different hardware.
    It would be very interesting to know the name of the entire laptop F20 - xxx?
    I found some info on the Toshiba site and many F20 supports DVD + R DL media.

    I guess that your drive also supports DVD + R DL media.

  • Qosmio G20 remote can be used to control the volume of a TV series?

    Hello. I read the instructions here http://www.salloway.org.uk/mediacenter/2005/index.html#remote, for programming of a Media Center remote control to adjust the Volume of a television. I can't the procedure to work with Toshiba Media Center Remote black :(

    I have a USB DVB - T Tuner connected to a Qosmio G20 connected to an XBox 360 connected to the LCD TV. The Toshiba remote has no problem of control of the XBox 360 (as Media Center Extender). But I need to juggle the two remotes... the TV for the Volume remote control and remote control Toshiba for everything else.

    Is it possible to program the Toshiba remote?

    Have you tried to connect the remote control or 'learn' to another TV? Maybe you should try it because it may be that the LCD is just incompatible or else.

    Would appreciate feedback. :)

    Welcome them

  • Can we use latest version of modules and toolkits with the old version of LabVIEW core?

    Hello world
    I'm new to LabVIEW
    I have a question.
    We can use (indeed install) latest version of modules and tools (for example, 2009 or 8.6.1 version) with the old version of LabVIEW core (for example LabVIEW 8.6)?
    No problem?!
    I have 8.6 (rating) of LabVIEW and I want to istall 2009 real-time Module.

    No you can not do. But you can download and install Labview 2009 and module RT 2009 Trail for 30 days.

Maybe you are looking for

  • 10.11.2 updated

    I tried to update to 10.11 to 10.11.1 a few months back and on restart the Macbook pro 15 "hooked on the Apple logo to ~ 60%. I had to enter in recovery and restore using Time machine. I then waited for 10.11.2 and again tried to update thinking the

  • an ivalid argument was met during the uninstallation of logitech vid

    I'm trying to uninstall logitech vid but he keeps saying. an invalid argument was encountered (how can I do?)

  • How to lock my network high-speed mobile 3g only?

    I am currently using acer w511 and even though I have a 3G network signal, sometimes, the signal turned to the EDGE network automatically and speed more slowly as *, so I was wondering, if there is a setting to indicate my network still locked on the

  • History State

    Hello everyone,I want to run a script, but it should not be on a step in state history. would be better if it was just a visible step, for example, there is a frequency separation are performed. In the history State should then 'separation of frequen

  • 7 fusion vs Fusion 8

    I use Fusion since version 3 and am currently using Fusion 7 with Windows VM of Win 95 to Win 10 (an upgrade and Windows Insider). There is also the OS X and Linux VM.I bought the upgrade of Fusion 8 when selling short when it came out, but have not