Qosmio F50 - 10K - problem graphics card while playing some games

Similar Questions

• Qosmio F50 - minis clippings or distortions while playing music

  I have brand new Qosmio F50 (VISTA).

  The problem is:
  From time to time, there are mini clippings or distortions while reading - play music or mp3 (on the HARD drive) or CD, using VLC or WMP.

  Did someone faced this problem? and how it can be corrected?

  Thank you

  PS
  Everest gives the following on "Multimedia":
  nVIDIA HDMI @ Intel 82801IB ICH9 - High Definition Audio Controller
  Realtek ALC272 @ Intel 82801IB ICH9 - High Definition Audio Controller

  Driver Realtek: 6.0.1.5636

  Have you tried to update the audio driver?
  Check this on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You have this problem only with the internal speakers? Try it with external systems.

  Also check the sound settings, maybe it is a bad thing.

• Qosmio F50 freezes during 30 sec while playing movies or games - iaStor error?

  Hello

  I use Qosmio F50 qosmio and some times when I watch movies or play games my pc for 30 sec similar freezes

  so I went to the "Event Viewer" and I saw this error:

  Log name: System
  Source: iaStor
  Date: 2009-05-15 10:08:57 Ã? Â?
  Event ID: 9
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: IMBA-PC
  Description:
  The device, \Device\Ide\iaStor0, did not in the expiration time.
  The event XML:
  
  
  
  9
  2
  0
  0 x 80000000000000
  
  58014
  System
  IMBA-PC
  
  
  
  \Device\Ide\iaStor0
  0F0005000100000000000000090004C00100000000 000000000000000000000000000000000000000000000000
  
  

  I tried to update my bios and video drivers, but I still get this problem rly btw my brother have the same F50 and get he is too.

  I hope you know something

  Thanks for reading.

  Faris

  Hello

  May I ask what OS are you using?
  Is this Toshiba pre-installed Vista OS or have you installed Win XP?

  From my experience the iaStor0 for the SATA driver file belongs and maybe it s a HARD drive problem

  Have you changed anything in the BIOS?
  Maybe something like SATA to AHCI mode compatible mode?

• While playing some games I get different blue screens. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT.

  While some games I get different blue screens and I can not understand what causes them, this only happens when I play a bit of some games. Include messages: WHEA ERROR INCORRIGIBLE and a common one is CLOCK WATCHDOG TIMEOUT. I tried a new install of Windows 8 and this problem still occurs these games has worked on the same computer with Windows 7.

  Original title: Windows 8 BSOD

  Tom

  They have been linked to the material (since obviously you re-installed), two of them were corrupted because of the speed of the accident.

  If you're a clocking over please return to default (overclocking pushes the material beyond the design of the ists)

  Please run a malwarebytes scan before starting on the underside

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Shock wave crashes while playing some games Facebook on Google Chrome.

  original title: Shockwave Crash

  Any time I play games on facebook, my Shockwave crashes or I get the message that the plug is not responding I want to close. I use Google Chrome.

  Hello

  1 does this problem occur when you play games in Internet Explorer as well?

  2. What is the exact error message that you receive when you play games online?

  I suggest that you uninstall and reinstall Shockwave Player and Adobe flashplayer and check if that helps. See the following link for uninstall and reinstall Shockwave Player and Adobe flash player.

  http://kb2.Adobe.com/CPS/403/kb403264.html

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  If the problem persists then contact Google Chrome support on the issue.

  http://www.Google.com/support/chrome/bin/request.py?contact_type=contact_policy

• Qosmio F50 - 10K - multimedia keys are not lit

  According to my topic

  "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

  I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

  In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

  Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

  Hi Jwrath,

  I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the VAP, restart the computer and install the new VAP software.

  In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

• Qosmio F50 - 10K: Fingerprint Reader question - sensor cannot be started

  Dear Sirs,

  I have a problem with my fingerprint reader.
  I just re-formatted my new laptop which is only 4 days old. I have a Qosmio F50 - 10K.

  I uninstalled Trueaccess Manager software several times and installed the latest version of the software from the site of EU from toshiba.

  I also used CCleaner to clean the registry.
  I always get an error indicating the sensor cannot be started.

  Can someone help me please?

  Thank you
  Danielsam

  If I remember well with fingerprint sensor small tutorial that will explain exactly how to do this and you can also practice how to remove the finger on the right track to successful fingerprint registration.

  To be honest, I can't imagine that there is something wrong with the software. Do a little test and let someone else to record fingerprints.

• Perhaps a mistake: Qosmio F50 - 10K with nvidia 9600?

  Perhaps a mistake: Qosmio F50 - 10K with nvidia 9600?

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=1055757

  Is the graphics engine NVIDIA GeForce 9700 M GTS model Qosmio F50 - 10K? like here:

  http://explore.Toshiba.com/laptops/Qosmio/F50/F55-Q503

  Sorry for my English, I m of Spain

  Hello
  Toshiba Qosmio F50 sold in europe and just like that: -.

  Qosmio F50-10 b: GeForce 9700M GTS GDDR3
  Qosmio F50 - 10K: {color: #ff0000} GeForce 9600 M GT GDDR2
  {color} Qosmio F50-108: GeForce 9700M GTS GDDR3
  Qosmio F50 - 10G: GeForce 9700M GTS GDDR3

  and Toshiba Qosmio F55 sold in the United States just like that: -.

  Qosmio F55-Q502: GeForce 9700M GTS GDDR3
  Qosmio F55-Q503: GeForce 9700M GTS GDDR3

  F50 for europe only, F55 for U.S. only

  I hope this will help

  Kind regards
  Reaver

• Portege A100 - need new driver for graphics card to play games

  I own a Portege A100 and I need to update the graphics controller to play games.

  My problem is I went to the Download Center and the latest driver is currently installed in my notebook.
  I got this game running before but had my cell reprogrammed and don't remember how to operate.

  Help, please!

  Hmmmm... to be honest Portege is not portable for the games. Maybe for playing chess, but for some graphics intensive games is certainly bad laptop.

  Anyway, the question is what you want to do.
  Do you want to play some games or simply to grow old (already working) game to run again? Or maybe the two options?

• Having problem while playing a game of Wow

  Original title: other for microsoft to scan my computer and find an im problems?

  started to have problems while playing a game of wow. starts fine then cant get in my articles, press Esc. but do not go to the minamizes inter face just, if I got to the laptop will not let me type anything

  Hi James,

   

  1. have you done any recent hardware or software changes to the computer before the show?

  2. What is the number of brand and model of the computer?

  Please follow the link and check with the question:

  Game hangs or quits unexpectedly:

  http://support.Microsoft.com/kb/303032

  Note: Also applies to non-Microsoft games.

  Important note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• While playing online games, I get this message. McAfee service as host encountered a problem and must close.

  Error messages

  I have Windows XP Home Edition. While playing online games, I get this message. McAfee service as host encountered a problem and must close. McAfee, as tried to help him stop for a day, then did it again. As MS sent me on this forum as everyone has an answer to this problem.

  Microsoft Security Essentials is an antivirus which is free.  You can also get www.malwarebytes.org for malware.

  Steve

• by creating a photo card or play a game screen goes blank.

  While playing the game on facebook if I hover over game it disappears, if I click off it reappears, disappears if I try to play the game.  Same thing happens when creating a map.  Was able to do both a week ago.  New computer. Previous backups went back to this day he worked.  I know that Adobe updated.

  Hi JeanneMiller,

  1. what operating system do you use?
  2. don't you make changes to the computer before the issue occur?
  3. what browser do you use?
  4. What do you mean exactly by "hover over the game? '
  5. what applications do you use to create the photo card?

  Method 1
  If you use Internet Explorer, you can try the steps from the following links:

  Solve Internet Explorer add-on problems when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us

  
  Method 2
  
  Can't access some Web sites in Internet Explorer
  http://support.Microsoft.com/kb/967897

• How can I control the media player while playing a game?

  OT: help!
  Is there a a way to control the media player while playing a game? e.g. change of songs

  Hi Serrieslack,
  If you talk to a Windows game, the only thing you can do is use your "windows key" or the alt + tab to switch between games. If you are talking about during the Xbox game, you can press the 'x' button and go in the settings of your Media Player and do what ever you need to do.
  Hope this helps,
  B Eddie

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)