Qosmio F50-126 not supprted for Windows 7 upgrade?

I get really angry with Toshiba and Windows 7 upgrade option.
I'm really excited about the upgrade of my Qosmio F50 - 126 to Windows 7 from Vista Home Premium.
But after doing a little research on issues related to the upgrade, I burst into anger.

I went to this link [http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm] to check if my phone is supported, but because I paid a lot of money for it I have it MUST have.

But guess what... IT IS NOT!

In addition to this... It says on the website that the notbook not mentioned will get "limited support"!
WHAT? my 1999 MACHINE VA GET LIMIT dollar taken in CHARGE for WINDOWS SEVEN!

That I am, I guess to do... buy another Toshiba or sue to get the money and buy a new one?
Does that mean I can't run windows 7 will be of all drivers runnin? WHAT SHOULD I DOOO DARN?

Hi mate

Guess what? I have an older A210 home
I installed Win 7 on it and everything works fine!
As you can see it the A210 is not listed as a supported series Win7, but it should be a serious reason does not install a Win7 on it?

I didn t find official drivers on the driver Toshiba page but I could perceive my own hand, I used tools of free hardware diagnosis, which helped determine the installed devices
I took the time to learn all the drivers, but it wasn't a big problem

Thus, even your laptop is not listed in the page, you will be able to use Windows 7 and will be able to collect the necessary drivers

Tags: Toshiba

Similar Questions

  • Qosmio G50 - second clone partition for Windows 7 upgrade

    I have a Qosmio G50 with Vista Ultimate installed & I have 2 disks to upgrade to Windows 7.

    Is there a way to use this 2nd partition cloned as the basis for the upgrade to Windows 7 & clone (with Vista) C: on another partition? In this way there would still be Vista to use for programs / drivers that are incompatible with Windows 7 & there will be a dual boot with Windows 7 option.

    Someone has it worked?

    Any help appreciated

    Hmm I don't think that this works since you would need a license for the two OS simultaneously. Win7 upgrade license replaces the Vista license

  • I can't disable the touchpad when I click FN + F9 on a Qosmio F50 - 126

    I can't disable the touchpad when I click FN + F9... I have a Qosmio F50-126... Windows Vista Edition Home Premium...
    Pls help... been trying to find the problem for so long... :-(

    You can use other FN keys?

  • Qosmio F50-126 - made Windows 7 affect the warranty?

    Hey

    I have a question regarding the upgrade of my Qosmio F50-126, I bought a few months ago - like 3 months. I was planning to install Windows 7 retail copy (when its on-board) on my laptop. My question is that is this violation of the Toshiba international warranty? He finished my warranty 3 years from now?

    Thank you

    Preinstalled OS has nothing to do with security. You can install on your Qosmio laptop you want.

  • Re: Qosmio F50-126 - freezes when it is on battery

    * everybody *.

    I bought my Qosmio F50-126 it there a few months to 3 years international warranty. There is something about the book that really irritates me-* THE FREEEZEE *.

    I noticed that when I watch a video on any player and any format, the computer all freeezess * for 1 or 3 seconds and takes * one * but the interesting thing is that it occurs when running on battery *. He runns like a dream when running on the sector with the battery charge. * IL UNBELIEVABLY boring *.

    When your in the movie and the lights are turned off and your in your bed hot comfly. The ENTIRE computer freezes with audio hopping. This happens only for 1 or 2 seconds but it occurance is * RANDOM.* COMPLETELY if the laptop is in the mood to watch the movie it freezes only 2 or 3 times, but sometimes he just get on my nerve.
    I disabled my kaspersky and other runing random process. Please help me!

    * Only for the note: happens that freezing only happens when running on battery *. This help Oh-hope

    I found that my HARD drive on the laptop light don't which often flashes when on battery and the playback of the video so it's not load time the reason... also... SAME RESULT WHEN I LAUNCHED THE HIGH PERFORMACE, BALANCED or power saver - actually powersaver is * _the WORST... Good bye... PLESE HELP ME OR MY LIFE IS DOOM_ *.

    Hello

    I have never heard of this issue and I must say that my Qosmio F50 really works great without any problem.

    It's not easy to say what is the reason, but you use the factory settings or you have installed your own version of Windows? Normally with preinstalled Windows should work without any problems.
    In addition, it would be interesting to know if you have installed a display driver not Toshiba. These drivers can overheat the system and damage the graphics card so make sure you use the display on the site of Toshiba driver.

    Last but not least, you should check the mode of cooling on battery mode. Maybe you don t have a maximum cooling on battery and overheating of laptop mode. You can resolve this problem if you clean the laptop using a jet of compressed air and always the value of the maximum cooling performance.

    Good bye

  • Media bar stopped working on my Qosmio F50-126

    I have a Qosmio F50-126 and bar media (next to the switch) stopped working and answer since I did the cover... the lights in the corners has also stopped working.

    What is the problem?
    Please help me...

    >.. Since I did the recovery
    Can you please explain what do you mean exactly.
    As part of the recovery, I understand you have installed the operating system using recovery Toshiba installation image and now you're using your laptop with the factory settings. Am I right about that?

    Have you can be installed some additional software or Windows updates?

    I mean question like what is the problem is pretty funny?
    Can you imagine I ask follow you: I can't start my car, what is the problem?
    What you can say about it, not much. Just speculating what may be the reason.

    If possible, reinstall the OS and test it immediately without having to install additional stuff. It should work well.

  • Qosmio F50-126 does support Quad Core processor

    I have a simple question:
    Is my image of Qosmio F50 - 126 support processor and HOW?
    Can I still use it.

    For 3 months of use of this fantastic machine, I never found an option for up-conversion.

    The only thing I've seen is in the program and function indicating the image processor driver.
    I HAVE NO IDEA HOW TO USE IT!

    Hello

    The Toshiba Quad Core HD processor (I think you meant this) is not supported by the Qosmio F50-126.
    I don't find it here:
    http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1061504

    If you want to know what models Qosmio F50 would support the Toshiba Quad Core HD processor then you can check this here:

    http://EU.computers.Toshiba-Europe.com-> Products-> Qosmio-> F50 series

  • Qosmio F50-126 - battery life reached only at 65%

    Hello world

    My Qosmio F50-126 only 65% in fees, then the display will begin to Flash continuously when it reaches 65%, and when I remove the charger the display no longer flashes.

    What is the problem?

    Help please

    Hey,.

    What light display do you mean exactly? Do you mean the light of the internal screen itself?

    As Akuma writes, this problem could be related to an old battery because they are consumables itmes and after a while or use it must be replaced.

    New battery, you can get for example authorized service provider.

  • Webcam on the Qosmio F50-126 error

    Hey... I'll try to keep this as short as possible:

    I used to use my webcam on the Qosmio F50-126 regularly. Until a few days ago the media key won t open camera assistant software Toshiba.
    Weird - I decided to go in the program file and open it from there. When I got tired running the application, an error message appears, said, I don't remember the exact words, but it was something like: "could not create the main/c, please reinstall the software I thought OK, I uninstalled all apps, rebooted, downloaded the installer and ran again the application.»

    I still get the same error... Help, please

    Nice! Great that you share it with us!
    Thank you!

  • Satellite A665-14R - drivers not available for Windows 10

    Hello
    I tried to search Toshiba A665-14R drivers but drivers are not available for Windows 10, if I'm looking for the section Drivers on the toshiba Web site and select my computer model A665-14R then no driver rises, I think toshiba assuming that A665-14R cannot install Windows 10 rather I have 8 GB of RAM & CPU Intel i7 with a 3D graphics card! Its not like my laptop is old and cannot load windows 10, Microsoft has already tested and approved my laptop to window windows installed 10, since I have installed 10 my laptop works fine but I am not able to install TOSHIBA PC Health Monitor, Synaptics Pointing Device Driver, installation of equipment TOSHIBA TOSHIBA value added package Etc Etc

    Its really annoying that I can't scroll down pages because the Synaptics pointing device has no update
    Any help please?
    Thank you

    This model is quite old and has been supported for Win7. I can just say... no luck. A lot of older machines may well work with newer operating systems, but they are not officially supported.

    What should do? Try to check if the drivers, tools and utilities for a newer machine with similar hardware can be used on your laptop Satellite A.

    I had the similar problem in the past with Vista and no supported Win7.

  • System Restore error: file spp.dll is not designed for windows or there is an error.

    Original title: download spp.dll

    My SPP.dll file is 0 kb.  When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.

    How can I get another spp.dll file? I can download one from the internet.  I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.

    Try to run the System File Checker:

    http://support.Microsoft.com/kb/929833/en-us

  • Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

    Dear support,

    I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

    Pls can update you with the new drivers of windows 8, which his slove my problem.

    Thanks in advance

    Concerning

    Vermorel

    Hi Majusko,

    If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

    HP LaserJet and Color LaserJet - Windows 8 media

    HP trade-in program

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

Maybe you are looking for

  • Visible instead of the asterisks stored password

    On my site when an account/password is stored by FireFox, whenever the page load the password appears in plain text no asterisks. It is a feature of the browser or are need of changes in the elements of the form on the Web page? If 2 or more password

  • HP Pavilion Notebook PC g6: HP Support Assistant Windows 10 questions

    Op system was previously bfr Windows 7 update to Windows 10 in Dec2015. Since then, have never been able to open HP Support Assistant. Am constantly pop-up "HPSF.exe has stopped working. The app has encountered a serious problem and needs to close. »

  • "" Windows 7 SP1 - error Code: 0x800F0A12 "one or more components of the system service pack requires are missing.

    I tried to install windows 7 SP1 and I got this error: "One or more system components that require the service pack are missing. For more information, click on the link below. » I tried everything but to no avail. Reinstall my OS is not an option. Th

  • The Windows Update components fail to install

    This morning I noticed that in the past 2 windows update components were not installed. The table below shows the number of the knowledge base for patches and their associated error codes. Title Knowledge Base number Error code Update for 2007 Micros

  • Notice of credit card expired

    I received notice that use it to pay monthly fees of credit card has expired and ask me to log on to my account.  The single account listed is very lonely and is no longer valid.  How can I get my current email address is displayed?