Qosmio F50 - light screen problems

Similar Questions

• Qosmio F50 - black screen on startup

  Hello

  I have a Toshiba Qosmio F50 and something very wired that happened to me today, I was just on the internet and I got bored so I took off the laptop.
  After maybe 10 minutes I restarted it upward and the screen is all black, I can hear the cell phone that works but the screen is all black and I tried to connect to a monitor and he won t do anything, even with the HDMI port.

  Any help is welcome
  Thank you.

  Try please to start several times to see if the same thing will happen again and again.
  After start the leave during a period of time see if you hear the typical sound of windows operating system starts. Then try to use the FN + F5 key combination to see if you can switch to the back of the office.

• Qosmio F10 Boot Screen problem

  I have an old book Osmio F10 2 years everything has gone wrong. I used the laptop last nite and was working fine. This morning when I turned it on, I heard a rattle of hard drive noise, so I refused and turn and he was still making the noise. Yet once I stopped it and to my surprise it wasn't beyond the Qosmio logo screen. Its saying an error #O IDE. I tried using the recovery disk but it says worng machine. In my view, is not regonizing my hard drive. I have documents important lots in my drive hard and do not want to lose. I really don't understand what is the problem.

  Your answers are appreciated!

  Sorry to say, but it seems that the HARD drive is crashed. Error IDE #0 is a bad sign. This means that the machine is unable to initialize the HARD disk. The rattling designates only the heads likely to be damaged.

  If the files are very important to you, you can send the HARD drive to a data recovery specialist. They can the data recovery, but it will be expensive.

  Remember that a HARD drive should never be invoked. They have mechanical parts and may crash at any time. It is important to back up your data on CD/DVD/USB/SD/Tape on a regular basis.

• Tecra M10 - light screen problems

  Hi guys,.

  at first I m sorry for my English is not perfect.

  That is the problem.

  When I created the brightness on my screen on max, everything is OK.
  But when I put it down to minimum, after awhile the diodes (or bulbs) stop working.

  I think there are 4 LEDs in the screen for two more left to stop work.
  When I created the brightness to max once again, after a while these left diodes begin to work again and everything seems fine.

  I thought that I would like to reinstall the display driver, but when I download and run the Setup.exe it says that my pc does not meet the requirements for the installation of this software and I have no idea why.

  Any idea what should I do?

  Thanks for your advice.

  Lucien

  PS: I have Tecra M10. C2D, Nvidia Quadro NVS 150

  > When I created the brightness to max once again, after a while these left diodes begin to work again and everything seems fine.

  Don t think its problem of diodes generally the FL inverter controls the brightness of the screen.
  The fl inverter is a small part that is placed behind the frame of the screen.

  I would say that this part needs to be replaced, but of course this is only my personal opinion and I recommend you ask a technician for a control before changing anything.

• Qosmio F50 - Webcam Error - Invalid floating point operation

  Hello

  I have a Qosmio F50 (4 weeks) problem is after two weeks webcam stopped working * not valid floating point operation *.
  I have to close the program via the Task Manager, * software camera Wizard does not *.

  Have you tried next.
  Update all drivers, System Restore

  Toshiba help line after all the efforts suggest all reinstall them it is aggressive for me, because he would lose some software on the laptop that I had to transfer old PCs and had to plead with some software companies to transfer (as a single license etc.).

  If someone else has had this problem and is there a simple solution

  Will be

  Hmm, you could remove the software of the webcam of the system and could remove too the webcam from the Device Manager.
  Then you could clean the operating system using the CCLeaner

  This software is free and it can clean the registry and the system. I use it very often.
  Then restart the laptop and try to reinstall the software of webcam again.

  Good luck

• On the Qosmio F50 of blue screen problem

  Hello world!

  Suddenly, I have a problem with my Qosmio F50. Frequently, it goes to the blue screen and says there is a problem with the hardware. I am running Vista and I havnt really brand new programs installed recently. I tried to write the code for the last time, it's happened, but has failed to catch the last didgits:

  STOP 0X0600008E 0CC0000005 (0X00000000, 0XA7F5IA9C...)

  Can someone help me please?

  Thank you.

  Hi blackgravy,

  At the present time it is difficult to tell why you get a blue screen it s often associated with drivers or RAM/HDD. First of all, you must follow the instructions posted by Akuma. Check your RAM with Memtest86. It s a freeware for RAM diagnostic tool where you can download an iso image to create a startup disk.

  To test the HARD drive, I can recommend similar Drive Fitness Test procedure such as Memtest86 with iso image and the bootable disc.

  Check this box!

• Screen not switch on the Qosmio F50 - 10Z

  Hello

  Recently, I received my laptop Toshiba Qosmio F50 - 10Z (yesterday), I am very pleased with. However I seem to have a problem with the screen does not reverse when you start the laptop in sleep or hibernation mode. I tried to change the output screen (Fn + F5) but it makes no difference, and the laptop screen is always off. I need to cut my machine (5 seconds by pressing the button / stop) and restart manually. Then, the screen lights up again.

  It doesn't seem to be drivers updated compared to those I already have / preinstalled.

  I hope someone can help solve my problem.

  Thank you

  The story is really strange for me also
  I'm 100% sure that Toshiba provides new laptops and if you bought a laptop with a few scratches then you should blame your laptop for the same problem dealer

  Maybe the dealer of the laptop used this camera for a show or similar

  Welcome them

• Qosmio F50 - 12 L - screen suddenly flashes!

  Hello

  I have laptop Qosmio F50 - 12L, it was working fine under vista. I received my kit to upgrade to win7 from Toshiba, I did a clean and fresh win7 ultimate 32 bit installation. It worked great for about a month or two. All of a sudden my screen flashes when I'm working or even if inactive (do not use portable powered only - it is not Sun), light is more up and down and so on, its happens around 10 times almost every day.

  I don't know that I have installed the right driver VGA which is nvidia 9600 M gt. I installed the driver appropriate since installing win7. Everything works very although I have this sudden question which is the screen flashes all the time.

  Can you please, or any body has any idea about it? What's wrong? Is it a hardware problem with my laptop? I really need to concern about this?

  I appreciate all the entries on that.

  Thanks in advance.

  Hey moody,.

  Can you also tell us what display driver you have installed exactly? What is this good driver do you mean?

  Before update you the BIOS or something else make sure last Toshiba display driver is installed. You can download it here:
  http://EU.computers.Toshiba-Europe.com

  And I don t understand your question about the BIOS. If you have installed the version 2.20 and diagnostic tool reports this version, everything is ok!

• Qosmio F50-12 b Win7 64 bit driver problems affects Fn, Power Saver, Tablet

  Hello

  I have Toshiba Qosmio F50 - 12 b. initially, I have Vista Ultimate 32 bit, then I refresh installation of Windows 7 Ultimate 64-bit...
  This is the problem,

  I installed all the drivers for my operating system and the computer, but I can not installed or activated FN key, TouchPad, PowerSaver of Toshiba and the keys palpable above the keys of Func/digital as Dolbly, Media Center, Forward, Backward, Mute-, lights-touchpad on - off utility.

  ? also tried vista 64 drivers for these things, but nothing works to them.
  I tried auto updater Toshiba win 7driver tool (tsi4win7.exe), but nothing changes.
  I need help on this situation... Is anyone know how active these utilities, in particular the FN keys and touchpad!

  Thank you...

  I hope that the Toshiba support my voice up and help this time :)

  Hi mate

  The 64-bit value Wi7 package and Support of Flash memory card utility must be installed.
  Flash Card Support utility controls the FN keys and you should install it, after installation of VAP.

  Also the media control buttons should work after the installation of the package value.

• Qosmio F50 - 10 k: cannot read any games - black screen

  Hello

  So, I'm having with my laptop since the beginning.

  * Laptop is: *.
  Qosmio F50 - 10 k, 4 GB ram, geforce 9600 m gt 512 MB and I changed my windows vista ultimate to Windows XP Home edition sp3.

  First, I changed the windows because I thought it can help (Vista can overload my pc, but the change to xp not really helped except that it's faster now).

  * My problem is: *.
  Computer is under normal execution, I can check Web sites, watch movies, youtube or use office programs, but I can't play * ANY game.
  When I turn the game can

  + System: Recommended requirements.
  + CPU: Intel Pentium 4 2.4 GHz or equivalent +.
  RAM: 512 MB RAM +.
  + Graphics card: GeForce FX 5600 or equivalent +.
  + DirectX: 9.0 c +.

  My laptop turns * black screen *.
  I listen to the music of the game, and my radiators are starting work dramaticlly.
  It's like 10 seconds after I opened the game. I have to remove the battery and reset it.

  Temperature at which I am writing this post is 60 ° C, as always when I do _completly nothing_.

  Can I have your help guys? Thank you.

  Hello

  The Windows XP drivers are not available for the Qosmio F50.
  I found only the drivers for Vista 32-bit and 64-bit OS.

  Your problem could be related to the Win XP drivers that are not certified by Toshiba
  The point is that this drivers don t support an overheating protection as do Toshiba drivers
  So maybe this is the reason why the GPU temperature increases to 60 C.
  But to be honest, the 60 ° C is not too high and each party will create more heat dissipation when running certain games or applications high performance

• Re: Screen color configuration for Qosmio F50-108

  Hello
  Can you please tell me what color of screen configuration you use for toshiba Qosmio F50-108?
  Mine seems quite strange...

  Thank you

  I always use default color settings, and I'm happy with it.
  You have some problems with the display of colors?

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• Flashing / blinking screen on Qosmio F50

  Hello

  I have a persistant problem with my F50 - 12L screen, suddenly, the brightness of the screen/flashing / display flashes monte and down all of a sudden (it's not weak, it happens when I'm not working as well)

  When I start my laptop, everything is smooth and works very well, suddenly it start to blink/display brightness up and down and flashing seconds, then disappears and back to normal! I use the drivers the most recent and latest 2.2 bios and OS is win7 ultimate 32 bit.

  I took it twice for the authorized reseller/support here in Egypt who called El-Araby Toshiba: http://toshiba.elarabygroup.com, whenever they say nothing wrong with it! I check it before leaving and all is well, and I tell them it's happening all the time, it happens right in front of them (is it my fault? lol) and back to the House and test it, he can run for hours without blinking etc, but all of a sudden he started once again for a while and disappear and so on...

  I thought that this is a problem with the adapter, it also happens when I'm working on the battery, and I tried to remove the battery and work on the adapter directly (to check if there is nothing wrong with the battery) and it happened again.

  Also, I tried to change my power mode, I tried all: high perf, balanced & power save modes, it "s happens regardless of the mode that I use.

  * Sometimes, when it happens, there is a noise hmm I do not know the source of the sound, but it seems to be the fan! (not sure, weird low sound! it's like zzzzz) I tried to set the screen and flashing/blinking disappears, but he don't help all the time, is there a problem with the screen itself?

  I got tired of this and of this support officer here in Egypt I can't drive for all the days 2 hours for nothing useful, and it's hard for me to leave the laptop for days each week when it happened.

  Everyone is facing these issues with screen blinking/flashing like mine? Do you have any ideas or suggestions in this regard? Toshiba provides direct email support? I couldn't find their email support, if so, I would be grateful to provide me with it, and any help is very appreciated.

  Sincerely,

  I m no technician and it is not easy to create some opinion or give advice based on the description of your problem. It's always the best way to understand the problem to see exactly what is happening. What it looks like, how the laptop or screen responds.

  It will be interesting to know if the same happen when the laptop is connected to an external monitor only. If this is not the case, the problem described is probably associated with LCD or FL inverter (because of its strange, you can hear).
  Can you please test and send more information?

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

• Video problem on Qosmio F50 - 10K

  Hello
  I connected my Qosmio F50 on a projector and watched a few movies and everything worked fine. But when I started playing an EA Sports NBA 2008 the system has collapsed and the image of the screen and the missing projector.

  I rebooted and tried again but after 10-15 minutes it collapsed again. I installed the latest version of the graphics driver nvidia a few days ago. Any help is appreciated, sorry for the bad English.

  > monitor and projector
  Can you please explain what exactly do you do?
  Choose a single device (monitor or projector) and test again.

  I hope you didn't just try to see the same image (cloned) on three different screens.