Qosmio F50 - the fan works more often?

Hello

I installed the display driver Windows 7 32 bit in 32 bit Vista and it worked almost fine except that the fan works for shorter time compared to when Vista 32-bit driver is installed.

Is there a way to make the fan work more often or always while aware that the driver 32-bit Windows 7 is much better, but increases the temperature of the laptop?

Thank you

Hey

The activity of the fan will be controlled automatically and there is no value that you can change. All you can do is to change the cooling method in Windows power management. For each level of power, you can change between maximum performance and battery optimized. If you choose a maximum performance of the activity of the fan will be higher.

But not don t. Important worry is that you have installed the Toshiba display driver and if your laptop overheats it would must down to protect the equipment.

Tags: Toshiba

Similar Questions

  • The fan works like a crazy and super fast drain battery after installation of Sierra

    I installed Sierra on my MacBook Pro, the fan works like crazy and the battery is empty after about 1.5 hours. Which never happened before. I'm only using Safari and Mail in the moment. I talked to Apple Support and they suggested to reset the SMC, but this brought no improvements. What can I do else? Again, I plan to install the El captain...

    I had this problem just after I installed Sierra on my MacBook Air.  First I tried to reset the SMC and the LANDAU.  This does not prevent fans constantly in the course of execution.  I then used the activity monitor to see what was possibly strain my system.  I noticed the "DCs" process was always sucking up to more than 90% of my CPU usage.  However, others said that it is normal after an upgrade of the OS and it should fall back down once the computer finishes its initial picture and analysis of the files.  So I run my MBA plugged nonstop for 36 hours in a row and the fans just kept running so that the process of "DCs" continued to drain at > 90% of CPU usage.  I also looked carefully at the activity monitor and saw that tasks such as analysis of photos had their own separate process "DCs".  So I dug further into what the devil "DCs" was really do with a lot of CPU resources.  Long story short, I found that there is some glitch in Sierra which causes the macOS stuck on a process involving the keychain and iCloud.

    That's what I did to fix this keychain/iCloud which led to "DCs" fans of triggering and overloading the CPU to be always on:

    -In the activity monitor, I used Force Quit to kill the process that involved the keychain

    -In the activity monitor, I then Force Quit the process that involved icloud

    -In activity monitor, I finally Force closed the process "DCs". (I found that I could not simply force quit 'DCs' without first allowing the keychain & iCloud first)

    -After all, I restarted the computer and fans were finally off the coast!  I open the activity monitor and saw that 'DCs' has is no longer hogging up the CPU usage.  Photoanalysis process were still running in the background at 40-50% CPU use with no trigger unwanted system fans.  the iCloud synchronization and my keychain also worked very well.

    I'm finally able to use Sierra without my fans blazing out of control.  It took me a while to get this sorted out.  Hope this helps to save you a few headaches and time until Apple can get counts that there is this Sierra software glitch they need to address.

  • The fan runs very often one a Tecra A6

    Hello
    I have a Tecra A6, about a month. I updated the BIOS yesterday to 2.60 and after that the fan works with intervals of 15 seconds. I don't know if it s the update of the BIOS that causes, but it was not there before... Anyone with the same problem? Can I go back to the old BIOS? If 'yes', how should I do?

    / Axel

    Hello

    May I ask why you updated the BIOS?
    Have you had problems or what?

    I think it s not necessary to update the BIOS if the laptop works properly.
    But of course, it of possible to downgrade the BIOS if you find the previous version of the Bios. But as far as I know on the Toshiba page you will find only the latest version of the BIOS. :(

    But have you tried changing the settings in the Toshiba power saver?
    What about the BIOS settings? Are there options CPU or fan?

  • After upgrading to fusion 6 ungrab the keyboard work more systematically.

    After upgrading to fusion 6 ungrab the keyboard work more systematically. About 80% of the time its not possible is the virtual machine using cnontrol-cmd ungrab. stop the virtual machine is the only want to regain control of the keyboard. All of the suggestions.

    Fixed it myself... Reinstall the tools VMware has not helped, I was using a wireless to imac keyboard, I tried to disable the usb and bluetooth sharing with windows from Fusion settings.

  • Adobe Reader 11 works more often since the installation of the 11.0.8 latest patch (on several business workstations)

    Hello

    I am a system administrator of the company with about 350 jobs.

    We have updated our client workstations (W7PROx64) of Adobe Reader 11.0.7 to Adobe Reader 11.0.8 and now some users complain that the adobe reader software stops working very often (quote: 'Every 5th PDF I opened, the accidents of adobe reader').

    Before that we distribute the update to 11.0.7 to 11.0.8 there was no such complains...

    Is this a problem of "well known"?

    Greetings from the Germany

    Thomas

    There is no support for free Adobe products, unless you have an agreement of departmental support.

    Regarding your problem: it needs to be done if you disable the Protected Mode [modify preferences |] (Improved) security]?  If so, you can use this registry script to quickly turn on several workstations: https://files.acrobat.com/a/preview/82c09ef4-f32e-4d41-97f3-74d9431f9f20

  • A100-692 left side fan works very often

    Hello

    I just bought a Satellite A100-692 with a processor intel Core Duo T2050 processor with and an ATI Radeon X 1400 graphics card. I am quite surprised how often works the fan on the left side. Sometimes it works even when the system is idle or I'm just surfing the web.

    Anyone have an idea why this is and how the problem can be solved probably? I already changed the settings of the energy-saving and of the settings (Powerplay) of ATI Catalyst Control Center.

    I'd be really grateful for your responses.

    Christian

    Hello Christian

    I know it's very annoying, but it is not a problem you have described. If you see other notebooks of other producers of the same situation there. New laptops are really powerful if compared to previous models.

    To increase the performance has a downside to produce more heat. If you check this forum, you will find a lot of discussion on the similar theme.

    Good bye

  • Satellite A135-S4527 cooling fan works more efficiently

    Hello

    I have an A135-S4527 and the cooling fan is having issues.
    It works at low speed constantly, as it usually does, but almost never, he runs in mode high speed.
    Clearly, it must be that the air temperature is high enough... about the temperature of the exhaust gases from the typical vehicle.

    I'm worried that it will burn upwards if I have not fixed, but I don't know what needs to be fixed.
    I use a "Chill Pad" USB power under him at all times to make it work more fresh than the factory settings, but this problem has arisen only recently.

    I've owned this computer from a little less than two years now.
    5 months in the property, the HARD drive failed and had to be replaced (it goes without saying, I save ALL my important files now).

    Does anyone have information on this topic or the normal functioning of the cooling fan?
    If so, it would be greatly appreciated.

    Nick

    Hello!

    As Akuma, it could be that it takes more dust in the cooling fans or fan doesn t work properly.
    So in your case, I'll try to clean first using a jet of compressed air. This could blow out the dust from the cooling fans. You can buy it at a computer retailer.

    If it doesn't work you should sent to an authorized service provider. Technicians can check your laptop and clean.
    Maybe the thermal compound must be renewed and technicians can do for you. It of a little more difficult to disassemble a computer laptop and you need to remove a large number of screws so he sent to an ASP.

    Good bye

  • Satellite M35x-s109 - screen is black, the fan works momentarily then nothing

    I have a Satellite M35x-s109 (4 years and more under warranty). I went to turn on the laptop after being in hibernation for a few hours.

    The fan kicks on momentarily - then stopped working. The screen displays a picture very very low sign windows on the screen but nothing else. I can not even a cursor appears. It is powered as indicated by the Green led on the front of the laptop. The battery is fully charged. I tried to connect with the power adapter as well. I tried to connect an external monitor to the laptop.

    The only image that appears is the Windows form indicating which loads. Then after a few seconds of loading, the image on the external monitor is empty and the monitor goes into sleep mode. The laptop is turned off automatically or custom fade at all and the only way for me to turn it off is to take out the battery.

    Any ideas what's wrong with the laptop? Thanks in advance.

    It's very strange question. try to remove the battery, leave cell phone 20 minutes without any food and try to start with power current only. Try it without, and later with the external monitor.

    When the external monitor goes into standby mode, try to use the FN + F5 key combination to see if you get the image on the external screen again.
    Play a little with it. If nothing is done it may be something serious with the screen and I'm afraid that you need professional help.

  • Qosmio F50 - the hard drive recovery?

    Hello

    I had a very big problem.
    I've made a few changes with my Vista regs and then I was unable to start again.
    So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.

    Well, now problem - everything was going well, but when I walked into the Vista installation I had to shut down the computer.
    Now, when I start up the pc and load Vista I message I need to reinstall my computer again.

    Well, they say nothing about how load the recovery file but I have no option for this - only emergency mode, with the support of network, etc., but without recovery emergency. Moreover, when I select emergency mode, I can't load Vista-it says I need to run the Setup in normal mode, which told to re - install. Yep, circle-_-.

    Model: Qosmio F50

    Do you think that when I erase all the Vista disc manually - for example with linux, and then start the computer, I get a possibility to load the second part of the drive to start the installation?

    Thanks in advance because I'm really despair

    Hello

    > So, I started the recovery program (second HARD drive), backed up my files and selected whole HARD drive recovery.
    I'm a bit confused of m.
    How do recover you the laptop?
    Have you used the Toshiba HDD recovery option which could be launched by pressing F8, select fix my computer-> Toshiba Recovery?

    Usually, it is a procedure how to start the Toshiba HDD recovery.

    I guess you didn't create a recovery Toshiba drive in the past is good?
    It was a big mistake buddy because the recovery disk would help you in difficult situations

    Well, as I said above; You can try to start the HARD drive recovery. If this will not help you I think that you would need a Toshiba Recovery disk.
    You can order it here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Qosmio F50 - 10Z - fan cycling on and outside, even when idle

    My f50 is constantly the fan turns and turns off every couple of minutes, even when the computer is idle and does not run applications.

    SpeedFan shows that the GPU is constantly cycling between 55 and 65 degrees C even if there are no applications running (for example just after the start)-the fan kicks in at age 65, died at 55, and then slowly warms up again. The noise of the fan is noticeable (I don't think it's going full speed, however), and it is a bit abrupt and boring happen constantly and is not normal behavior. Core 1 and 2 on Speedfan are cycles between 40 and 45 C

    Outside temperature is 20 degrees, so the environment is unlikely to be a factor. I blasted air fan for dust (as much as you can because the f50 is not built to be taken by a user to the home page), but even when the fan runs at the output seems visibly warm.

    I am only drivers of toshiba running on the site (currently 7.15.11.7590)

    My main concern is that this will negatively affect the life of the fan. Am I being too picky or is there something else I could do?

    Thanks for the tips

    Hello!

    It's not easy to say what's the reason of this problem, I so a few questions:
    Did you install the laptop with the recovery disk or Microsoft?
    What operating system do you use?

    First of all, you should try to update the BIOS. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Also, make sure that there is enough free space a tower the specifications that the air circulation is not blocked.

    I hope I could help a bit.

    Good bye

  • Equium A110-233 stops using the WiFi and the fans work only 3 sec

    I bought an A110 - 233 20/09/06. It works very well for about 1 hour then it interrupts the communication via the wireless network connection status States he is always connected, sometimes but not always the configuration window indicates that the without wire is cut and I should turn it on at the bottom of the window (there is lit) processor Intel Pro.

    I brought the world PC waiting for a replacement but I had to sit for an hour trying to reproduce the error, we couldn't go wrong but I have discovered that it does only when running on the network.

    Cooling fan only works for 1-3 seconds at a time, is it possible to increase this number.

    Any help would be appreciated
    Bob

    Hello

    If you want to change the properties of cooling module you must do in the standby power settings.
    You should know that the energy saver uses different modes of consumption. The laptop is using another mode of energy if the AC adapter is plugged and another mode of power if the laptop works only with the battery.
    On the basis of energy saver menu, you will be able to change the method of cooling. This option controls the fan.

    It is not easy to solve the problem of WLAN communication. I mean that there is no general solution. Additional it is not easy to solve because the issue doesn't happen always, but sometimes only. Perhaps the intensity of the signal is sometimes lower and therefore, the configuration software WLan Intel reports that the wireless network is turned off.

    In addition, you should also check the Wlan card properties. You will find that the properties in Device Manager-> right click on the wireless network card.
    Here, you must select the Advanced tab.
    You should find a few interesting options such as energy saving (disable) or the strength of the signal (enable).

    In addition, you can try to update the WLan driver. Maybe a new version is available.

    By the way: you should also know that some 3rd party application could have a bad influence on WLan communication.

  • Qosmio F50-126 - fan speed never htting maximum

    Hey

    This question been bothering me for a long time but was too lazy to write about it. When I start my laptop, you can hear the fan speed reaching its maximum RPM. But during the game when the laptop is about to reach its maximum temperature for restart, the speed of the fan never hits its maximum RPM. It always seems to be about 50 percent when it will hit the threshold of overheating.

    Can you tell me how to solve this problem, so the laptop is we fan maximum RPM during the games or another cpu/gpu intensive process?

    I have the latest BIOS and drivers installed to date.

    Plan to use everything at stake?
    Check the method of cooling for this power plan and set it to maximum performance.

  • Tecra A3-145: cooling fan works very often

    Hello.
    I have a Tecra A3-145 I just bought. During regular browsing that fan comes on about every 15 seconds and remains on for about 30 seconds. Is this normal, especially for just browsing?

    Thanks for your help :)
    Dan

    Hi Dan,.

    The ventilation system on my functions very similar to the one on your Tecra SA30. Fans usually starts in a second or two of the system being initialized and will be off until I have started using the system. Navigation Internet will usually cause fans run slowly at first, but any increase in activity such as downloading, or any use of the activex will cause fans to step up in speed.

    Any use of busy graphics will cause fans to operate intensively, that will be burning CD/DVDs or video rendering.

    It doesn't seem to me as if your Tecra is bad conduct. As stated in the previous post, make sure that the appliance is well ventilated.

    Kind regards

  • Re: Satellite A660 fan works very often and it's really loud

    I have problem with fan, it runs very often and it is really very strong.

    I think you should clean your laptop cooling system

    http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

  • Satellite A660-10W - fan works too

    I had my A660-10W 10 months. Recently the fan suddenly turn a lot, whereas previously it was quiet. I don't do games, I just write and browse the Internet or watch a movie. The fan works now, 69% always, very often 90% and temperature show 54 or 64.

    I would like to point out the fan does not like this before, so I'm worried that it will cause damage.

    Thank you.

    Hi Bedouins,

    Are you currently using another power plan or have you changed something on the cooling method? From my own experience, I can say that if I use the Eco mode there are much less active fan. If the laptop is quieter and it safes a little battery.
    If you use the power balanced Windows profile, it uses the method of cooling a maximum performance. If the fan runs more often.
    In most cases I use the Eco mode to surf on the internet because it s enough.

    In addition it s advisable to clean the cooling system from time to time using a jet of compressed air.
    Do you have already?

Maybe you are looking for